#! /bin/sh

# From configure.in Revision: 1.35 









# Add --enable-maintainer-mode option to configure.
# From Jim Meyering

# serial 1



# Define a conditional.














# serial 40 AC_PROG_LIBTOOL




# AC_LIBTOOL_DLOPEN - enable checks for dlopen support


# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's


# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.


# AC_DISABLE_SHARED - set the default shared flag to --disable-shared


# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.


# AC_DISABLE_STATIC - set the default static flag to --disable-static



# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.


# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install


# AC_PROG_LD - find the path to the GNU or non-GNU linker




# AC_PROG_NM - find the path to a BSD-compatible name lister


# AC_CHECK_LIBM - check for math library


# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-convenience to the
# configure arguments.  Note that LIBLTDL and INCLTDL are not
# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
# with '${top_builddir}/' and INCLTDL will be prefixed with
# '${top_srcdir}/' (note the single quotes!).  If your package is not
# flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.


# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-install to the configure
# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
# with '${top_srcdir}/' (note the single quotes!).  If your package is
# not flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.




# Do all the work for Automake.  This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.

# serial 1




#
# Check to make sure that the build environment is sane.
#





# Like AC_CONFIG_HEADER, but automatically create stamp file.



# Enable threads
# Pass with no value to take the default
# Pass with a value to specify a thread package
















































# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13 
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.

# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
  --enable-maintainer-mode enable make rules and dependencies not useful
                          (and sometimes confusing) to the casual installer"
ac_help="$ac_help
 --with-flavor=<FL>     Specify the globus build flavor or without-flavor for a flavor independent  "
ac_help="$ac_help
 --enable-static-only     Don't do any dynamic linking"
ac_help="$ac_help
 --enable-doxygen[=PATH]     use Doxygen to generate documentation"
ac_help="$ac_help
 --enable-internal-doc        Generate Doxygen documentation for
                   internal functions. Requires --enable-doxygen"
ac_help="$ac_help
  --disable-insure	disable Insure++ "

# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'

# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12

ac_prev=
for ac_option
do

  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval "$ac_prev=\$ac_option"
    ac_prev=
    continue
  fi

  case "$ac_option" in
  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) ac_optarg= ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case "$ac_option" in

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir="$ac_optarg" ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build="$ac_optarg" ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file="$ac_optarg" ;;

  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
  | --da=*)
    datadir="$ac_optarg" ;;

  -disable-* | --disable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    eval "enable_${ac_feature}=no" ;;

  -enable-* | --enable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "enable_${ac_feature}='$ac_optarg'" ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix="$ac_optarg" ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he)
    # Omit some internal or obsolete options to make the list less imposing.
    # This message is too long to be a string in the A/UX 3.1 sh.
    cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
  --cache-file=FILE       cache test results in FILE
  --help                  print this message
  --no-create             do not create output files
  --quiet, --silent       do not print \`checking...' messages
  --version               print the version of autoconf that created configure
Directory and file names:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [same as prefix]
  --bindir=DIR            user executables in DIR [EPREFIX/bin]
  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
  --datadir=DIR           read-only architecture-independent data in DIR
                          [PREFIX/share]
  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
                          [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
  --includedir=DIR        C header files in DIR [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
  --infodir=DIR           info documentation in DIR [PREFIX/info]
  --mandir=DIR            man documentation in DIR [PREFIX/man]
  --srcdir=DIR            find the sources in DIR [configure dir or ..]
  --program-prefix=PREFIX prepend PREFIX to installed program names
  --program-suffix=SUFFIX append SUFFIX to installed program names
  --program-transform-name=PROGRAM
                          run sed PROGRAM on installed program names
EOF
    cat << EOF
Host type:
  --build=BUILD           configure for building on BUILD [BUILD=HOST]
  --host=HOST             configure for HOST [guessed]
  --target=TARGET         configure for TARGET [TARGET=HOST]
Features and packages:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --x-includes=DIR        X include files are in DIR
  --x-libraries=DIR       X library files are in DIR
EOF
    if test -n "$ac_help"; then
      echo "--enable and --with options recognized:$ac_help"
    fi
    exit 0 ;;

  -host | --host | --hos | --ho)
    ac_prev=host ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host="$ac_optarg" ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir="$ac_optarg" ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir="$ac_optarg" ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir="$ac_optarg" ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir="$ac_optarg" ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst \
  | --locals | --local | --loca | --loc | --lo)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
    localstatedir="$ac_optarg" ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir="$ac_optarg" ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir="$ac_optarg" ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix="$ac_optarg" ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix="$ac_optarg" ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix="$ac_optarg" ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name="$ac_optarg" ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir="$ac_optarg" ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir="$ac_optarg" ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site="$ac_optarg" ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir="$ac_optarg" ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir="$ac_optarg" ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target="$ac_optarg" ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers)
    echo "configure generated by autoconf version 2.13"
    exit 0 ;;

  -with-* | --with-*)
    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "with_${ac_package}='$ac_optarg'" ;;

  -without-* | --without-*)
    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    eval "with_${ac_package}=no" ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes="$ac_optarg" ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries="$ac_optarg" ;;

  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
    ;;

  *)
    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
      echo "configure: warning: $ac_option: invalid host type" 1>&2
    fi
    if test "x$nonopt" != xNONE; then
      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
    fi
    nonopt="$ac_option"
    ;;

  esac
done

if test -n "$ac_prev"; then
  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>./config.log

echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5

# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
  case "$ac_arg" in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
  esac
done

# NLS nuisances.
# Only set these to C if already set.  These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=Makefile.am

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then its parent.
  ac_prog=$0
  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
  srcdir=$ac_confdir
  if test ! -r $srcdir/$ac_unique_file; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
  if test "$ac_srcdir_defaulted" = yes; then
    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
  else
    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
  fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`

# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    echo "loading site script $ac_site_file"
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='	'
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi





echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:724: checking whether to enable maintainer-specific portions of Makefiles" >&5
    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
  enableval="$enable_maintainer_mode"
  USE_MAINTAINER_MODE=$enableval
else
  USE_MAINTAINER_MODE=no
fi

  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
  

if test $USE_MAINTAINER_MODE = yes; then
  MAINTAINER_MODE_TRUE=
  MAINTAINER_MODE_FALSE='#'
else
  MAINTAINER_MODE_TRUE='#'
  MAINTAINER_MODE_FALSE=
fi
  MAINT=$MAINTAINER_MODE_TRUE
  


# checking for the GLOBUS_LOCATION

if test "x$GLOBUS_LOCATION" = "x"; then
    echo "ERROR Please specify GLOBUS_LOCATION" >&2
    exit 1
fi
if test "x$GPT_LOCATION" = "x"; then
    GPT_LOCATION=$GLOBUS_LOCATION
    export GPT_LOCATION
fi

#extract whether the package is built with flavors from the src metadata
$GPT_LOCATION/sbin/gpt_extract_data --build $srcdir/pkgdata/pkg_data_src.gpt.in > tmpfile.gpt

. ./tmpfile.gpt
rm ./tmpfile.gpt

if test "x$GPT_BUILD_WITH_FLAVORS" = "xno"; then
        GLOBUS_FLAVOR_NAME="noflavor"
fi

# Check whether --with-flavor or --without-flavor was given.
if test "${with_flavor+set}" = set; then
  withval="$with_flavor"
  
	case $withval in
	no)
		NO_FLAVOR="yes"
		;;
	yes)
		echo "Please specify a globus build flavor" >&2
		exit 1
		;;
	*)
        if test "x$GLOBUS_FLAVOR_NAME" = "xnoflavor"; then
	        echo "Warning: package doesn't build with flavors $withval ignored" >&2
	        echo "Warning: $withval ignored" >&2
        else
		GLOBUS_FLAVOR_NAME=$withval
                if test ! -f "$GLOBUS_LOCATION/etc/globus_core/flavor_$GLOBUS_FLAVOR_NAME.gpt"; then
	                echo "ERROR: Flavor $GLOBUS_FLAVOR_NAME has not been installed" >&2
	                exit 1
                fi 

        fi
		;;
	esac
	
else
   
        if test "x$GLOBUS_FLAVOR_NAME" = "x"; then
	        echo "Please specify a globus build flavor" >&2
	        exit 1
        fi
	

fi




        if test "x$GPT_LOCATION" = "x"; then
                echo "ERROR Please specify GPT_LOCATION" >&2
                exit 1
        fi

        

	#extract the name and version of the package from the src metadata
	$GPT_LOCATION/sbin/gpt_extract_data --name --version $srcdir/pkgdata/pkg_data_src.gpt.in > tmpfile.gpt
	. ./tmpfile.gpt
	rm ./tmpfile.gpt
	GPT_VERSION="$GPT_MAJOR_VERSION.$GPT_MINOR_VERSION"

        # Determine if GPT is version 2.x

        GPT_IS_2="no"

        if test -f "$GPT_LOCATION/sbin/gpt-build"; then
                GPT_IS_2="yes"
        fi

        

	#Default to shared, before checking static-only
	GPT_LINKTYPE="shared"
	# We have to figure out if we're linking only static before build_config
	# Check whether --enable-static-only or --disable-static-only was given.
if test "${enable_static_only+set}" = set; then
  enableval="$enable_static_only"
  
	case $enableval in
	no)
		GPT_LINKTYPE="shared"
		;;
	yes)
		GPT_LINKTYPE="static"
		;;
	*)
		echo "--enable-static-only has no arguments" >&2
		exit 1
		;;
	esac
	
	
fi


	#extract the cumulative build environment from the installed development tree
	
	if $GPT_LOCATION/sbin/gpt_build_config -src $srcdir/pkgdata/pkg_data_src.gpt.in -f $GLOBUS_FLAVOR_NAME -link $GPT_LINKTYPE; then 
		echo "Dependencies Complete";
	else 
		exit 1;
	fi
	

# The following variables are used to manage the build enviroment
# GPT_CFLAGS, GPT_INCLUDES, GPT_PGM_LINKS, GPT_LIB_LINKS, and GPT_LDFLAGS
# are the variables used in the Makefile.am's
# GPT_PKG_CFLAGS, GPT_EXTERNAL_INCLUDES and GPT_EXTERNAL_LIBS are stored 
# as build data in the packaging metadata file.
# GPT_CONFIG_FLAGS, GPT_CONFIG_INCLUDES, GPT_CONFIG_PGM_LINKS, and 
# GPT_CONFIG_LIB_LINKS are returned by gpt_build_config and contain build
# environment data from the dependent packages.



	. ./gpt_build_temp.sh  
	rm ./gpt_build_temp.sh
	GPT_CFLAGS="$GPT_CONFIG_CFLAGS"
	GPT_INCLUDES="-I$GLOBUS_LOCATION/include/$GLOBUS_FLAVOR_NAME $GPT_CONFIG_INCLUDES"
	GPT_LIBS="$GPT_CONFIG_PKG_LIBS $GPT_CONFIG_LIBS"
	GPT_LDFLAGS="$GPT_CONFIG_STATIC_LINKLINE -L$GLOBUS_LOCATION/lib $GPT_LDFLAGS"
	GPT_PGM_LINKS="$GPT_CONFIG_PGM_LINKS $GPT_CONFIG_LIBS"
	GPT_LIB_LINKS="$GPT_CONFIG_LIB_LINKS $GPT_CONFIG_LIBS"



	
	
	
	
	
	
	
	
	
	
	
	
	
	
	builddir=`pwd`
	






if test "$NO_FLAVOR" = "yes"; then
  WITHOUT_FLAVORS_TRUE=
  WITHOUT_FLAVORS_FALSE='#'
else
  WITHOUT_FLAVORS_TRUE='#'
  WITHOUT_FLAVORS_FALSE=
fi



# get the environment scripts

if test "x$GLOBUS_FLAVOR_NAME" != "xnoflavor" ; then
	. $GLOBUS_LOCATION/libexec/globus-build-env-$GLOBUS_FLAVOR_NAME.sh
fi

prefix='$(GLOBUS_LOCATION)'
exec_prefix='$(GLOBUS_LOCATION)'





























FILELIST_FILE=`pwd`;
FILELIST_FILE="$FILELIST_FILE/pkgdata/master.filelist"


if test -f $srcdir/dirt.sh ; then
    . $srcdir/dirt.sh
else
    DIRT_TIMESTAMP=`perl -e 'print time'`
    DIRT_BRANCH_ID=99999
fi












	LIBTOOL='$(SHELL) $(GLOBUS_LOCATION)/sbin/libtool-$(GLOBUS_FLAVOR_NAME)'
	
	



ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.

# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:1014: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
  for ac_dir in $PATH; do
    # Account for people who put trailing slashes in PATH elements.
    case "$ac_dir/" in
    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if test -f $ac_dir/$ac_prog; then
	  if test $ac_prog = install &&
            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done
  IFS="$ac_save_IFS"

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL="$ac_cv_path_install"
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL="$ac_install_sh"
  fi
fi
echo "$ac_t""$INSTALL" 1>&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'

echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
echo "configure:1067: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
   if test "$*" = "X"; then
      # -L didn't work.
      set X `ls -t $srcdir/configure conftestfile`
   fi
   if test "$*" != "X $srcdir/configure conftestfile" \
      && test "$*" != "X conftestfile $srcdir/configure"; then

      # If neither matched, then we have a broken ls.  This can happen
      # if, for instance, CONFIG_SHELL is bash and it inherits a
      # broken ls alias from the environment.  This has actually
      # happened.  Such a system could not be considered "sane".
      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
alias in your environment" 1>&2; exit 1; }
   fi

   test "$2" = conftestfile
   )
then
   # Ok.
   :
else
   { echo "configure: error: newly created file is older than distributed files!
Check your system clock" 1>&2; exit 1; }
fi
rm -f conftest*
echo "$ac_t""yes" 1>&6
if test "$program_transform_name" = s,x,x,; then
  program_transform_name=
else
  # Double any \ or $.  echo might interpret backslashes.
  cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
  rm -f conftestsed
fi
test "$program_prefix" != NONE &&
  program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"

# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"

echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:1124: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftestmake <<\EOF
all:
	@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
  eval ac_cv_prog_make_${ac_make}_set=yes
else
  eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  SET_MAKE=
else
  echo "$ac_t""no" 1>&6
  SET_MAKE="MAKE=${MAKE-make}"
fi


PACKAGE=$GPT_NAME

VERSION=$GPT_VERSION

if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
fi
cat >> confdefs.h <<EOF
#define PACKAGE "$PACKAGE"
EOF

cat >> confdefs.h <<EOF
#define VERSION "$VERSION"
EOF



missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
echo "configure:1170: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (aclocal --version) < /dev/null > /dev/null 2>&1; then
   ACLOCAL=aclocal
   echo "$ac_t""found" 1>&6
else
   ACLOCAL="$missing_dir/missing aclocal"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
echo "configure:1183: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoconf --version) < /dev/null > /dev/null 2>&1; then
   AUTOCONF=autoconf
   echo "$ac_t""found" 1>&6
else
   AUTOCONF="$missing_dir/missing autoconf"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working automake""... $ac_c" 1>&6
echo "configure:1196: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (automake --version) < /dev/null > /dev/null 2>&1; then
   AUTOMAKE=automake
   echo "$ac_t""found" 1>&6
else
   AUTOMAKE="$missing_dir/missing automake"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
echo "configure:1209: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoheader --version) < /dev/null > /dev/null 2>&1; then
   AUTOHEADER=autoheader
   echo "$ac_t""found" 1>&6
else
   AUTOHEADER="$missing_dir/missing autoheader"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
echo "configure:1222: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
   MAKEINFO=makeinfo
   echo "$ac_t""found" 1>&6
else
   MAKEINFO="$missing_dir/missing makeinfo"
   echo "$ac_t""missing" 1>&6
fi







if test "x$NO_FLAVOR" = "x"; then

# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:1248: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6

echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1269: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 1284 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1290: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -E -traditional-cpp"
  cat > conftest.$ac_ext <<EOF
#line 1301 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1307: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -nologo -E"
  cat > conftest.$ac_ext <<EOF
#line 1318 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1324: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
  ac_cv_prog_CPP="$CPP"
fi
  CPP="$ac_cv_prog_CPP"
else
  ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6



ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for thread.h""... $ac_c" 1>&6
echo "configure:1352: checking for thread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1357 "configure"
#include "confdefs.h"
#include <thread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1362: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  have_thread_h=yes
else
  echo "$ac_t""no" 1>&6
have_thread_h=
fi

ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
echo "configure:1386: checking for pthread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1391 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1396: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  have_pthread_h=yes
else
  echo "$ac_t""no" 1>&6
have_pthread_h=
fi


#Check for thread libraries
if test x$have_thread_h = xyes; then 

	echo $ac_n "checking for thr_create in -lthread""... $ac_c" 1>&6
echo "configure:1423: checking for thr_create in -lthread" >&5
ac_lib_var=`echo thread'_'thr_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lthread  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1431 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char thr_create();

int main() {
thr_create()
; return 0; }
EOF
if { (eval echo configure:1442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  GLOBUS_HAVE_SOLARIS_THREADS="yes"
	 SOLARIS_THREAD_LIB_FLAGS="-lthread"
	
else
  echo "$ac_t""no" 1>&6
fi


fi

if test x$have_pthread_h = xyes; then 

# Add other libs if necessary

	case $host in # defined by AC_CANONICAL_HOST

        	*solaris2* ) other_libs="-lposix4";;
		*-hp-hpux10* | *-hp-hpux11* ) other_libs="-lm";;
		* ) other_libs=;;
	esac
        GLOBUS_HAVE_PTHREADS="yes"
fi

# Decide on one thread package


case $GLOBUS_THREADS in

solaristhreads)
	if test "$GLOBUS_HAVE_SOLARIS_THREADS" = "yes" ; then

		THREAD_LIB_FLAGS=$SOLARIS_THREAD_LIB_FLAGS
	else
		echo "ERROR: thread flavor $flavor not supported on this platform"
		exit 1
	fi
	;;

sproc)
;;

external)
;;
pthreads)
	if test "$GLOBUS_HAVE_PTHREADS" = "yes" ; then

		THREAD_LIB_FLAGS=$PTHREAD_LIB_FLAGS
	else
		echo "ERROR: thread flavor $flavor not supported on this platform"
		exit 1
	fi
	;;
none)
		THREAD_LIB_FLAGS=
;;
*)
	echo "ERROR: thread flavor $flavor not recognized"
	exit 1
	;;	
esac


fi

echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
echo "configure:1522: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1527 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
#ifdef signal
#undef signal
#endif
#ifdef __cplusplus
extern "C" void (*signal (int, void (*)(int)))(int);
#else
void (*signal ()) ();
#endif

int main() {
int i;
; return 0; }
EOF
if { (eval echo configure:1544: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_type_signal=void
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_type_signal=int
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_type_signal" 1>&6
cat >> confdefs.h <<EOF
#define RETSIGTYPE $ac_cv_type_signal
EOF





echo $ac_n "checking how to execute a function on program exit""... $ac_c" 1>&6
echo "configure:1566: checking how to execute a function on program exit" >&5
lac_cv_atexit="no"
cat > conftest.$ac_ext <<EOF
#line 1569 "configure"
#include "confdefs.h"
#include <stdlib.h>
	void func() {}
int main() {
atexit(func)
    
; return 0; }
EOF
if { (eval echo configure:1578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define HAVE_ATEXIT 1
EOF
 lac_cv_atexit="atexit"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*

if test $lac_cv_atexit = "no"; then
cat > conftest.$ac_ext <<EOF
#line 1592 "configure"
#include "confdefs.h"
#include <stdlib.h>
	void func() {}
int main() {
on_exit(func)
    
; return 0; }
EOF
if { (eval echo configure:1601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define HAVE_ONEXIT 1
EOF
 lac_cv_atexit="on_exit"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
fi

echo "$ac_t""$lac_cv_atexit" 1>&6





case "$host_os" in
    osf5.*)
        check_gethostbyaddr_r=no
        check_gethostbyname_r=no
        ;;
    *)
        check_gethostbyaddr_r=yes
        check_gethostbyname_r=yes
        ;;
esac


if test $GLOBUS_THREADS != "none" -a ${check_gethostbyaddr_r} = "yes" ; then

for ac_func in gethostbyaddr_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:1637: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1642 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:1665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
	echo $ac_n "checking number of arguments to gethostbyaddr_r""... $ac_c" 1>&6
echo "configure:1685: checking number of arguments to gethostbyaddr_r" >&5
	globus_gethostbyaddr_args=no
	cat > conftest.$ac_ext <<EOF
#line 1688 "configure"
#include "confdefs.h"

#            include <sys/types.h>
#            include <netdb.h>
int main() {

            char *address;
            int length;
            int type;
            struct hostent h;
            struct hostent_data hdata;
            int rc;

            rc = gethostbyaddr_r(address, length, type, &h, &hdata);
	
; return 0; }
EOF
if { (eval echo configure:1706: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_GETHOSTBYADDR_R_5 1
EOF
 globus_gethostbyaddr_args=5
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
        if test $globus_gethostbyaddr_args = no; then
            cat > conftest.$ac_ext <<EOF
#line 1719 "configure"
#include "confdefs.h"

#	        include <sys/types.h>
#               include <netdb.h>
int main() {

                char *address;
                int length;
                int type;
                struct hostent h;
                char buffer[10];
                int buflen;
                int h_errnop;
                struct hostent *hp;

                hp = gethostbyaddr_r(address, length, type, &h,
                                     buffer, buflen, &h_errnop);
            
; return 0; }
EOF
if { (eval echo configure:1740: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_GETHOSTBYADDR_R_7 1
EOF
 globus_gethostbyaddr_args=7
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
        fi

        if test $globus_gethostbyaddr_args = no; then
	   cat > conftest.$ac_ext <<EOF
#line 1755 "configure"
#include "confdefs.h"

#              include <sys/types.h>
#              include <netdb.h>
int main() {

               char *address;
               int length;
               int type;
	       int rc;
               struct hostent h;
               char buffer[10];
               int buflen;
               int h_errnop;
               struct hostent *hp;

               rc = gethostbyaddr_r(address, length, type, &h,
                                     buffer, buflen, &hp, &h_errnop); 

           
; return 0; }
EOF
if { (eval echo configure:1778: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_GETHOSTBYADDR_R_8 1
EOF

              globus_gethostbyaddr_args=8
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
        fi
        echo "$ac_t""$globus_gethostbyaddr_args" 1>&6
        
else
  echo "$ac_t""no" 1>&6
fi
done

fi

for ac_func in gethostbyname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:1803: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1808 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:1831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


if test $GLOBUS_THREADS != "none" -a ${check_gethostbyname_r} = "yes" ; then
for ac_func in gethostbyname_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:1860: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1865 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:1888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
         echo $ac_n "checking number of arguments to gethostbyname_r""... $ac_c" 1>&6
echo "configure:1908: checking number of arguments to gethostbyname_r" >&5
	 globus_gethostbyname_args=no
	 cat > conftest.$ac_ext <<EOF
#line 1911 "configure"
#include "confdefs.h"

#            include <sys/types.h>
#            include <netdb.h>
int main() {

	     struct hostent *hp;
	     struct hostent h;
	     char *name;
	     char buffer[10];
	     int  h_errno;

	     hp = gethostbyname_r(name, &h, buffer, 10, &h_errno);
	 
; return 0; }
EOF
if { (eval echo configure:1928: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_GETHOSTBYNAME_R_5 1
EOF
 globus_gethostbyname_args=5
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
	 if test $globus_gethostbyname_args = no; then
	     cat > conftest.$ac_ext <<EOF
#line 1941 "configure"
#include "confdefs.h"

#                include <sys/types.h>
#                include <netdb.h>
int main() {

		 struct hostent h;
		 struct hostent_data hdata;
		 char *name;
		 int rc;

		 rc = gethostbyname_r(name, &h, &hdata);
	     
; return 0; }
EOF
if { (eval echo configure:1957: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_GETHOSTBYNAME_R_3 1
EOF
 globus_gethostbyname_args=3
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
	 fi
	 if test $globus_gethostbyname_args = no; then
	    cat > conftest.$ac_ext <<EOF
#line 1971 "configure"
#include "confdefs.h"

#               include <sys/types.h>
#               include <netdb.h>
            
int main() {

		struct hostent h;
		struct hostent *hp;
		char *name;
		char buf[10];
		int rc;
		int h_errno;

		rc = gethostbyname_r(name, &h, buf, 10, &hp, &h_errno);
            
; return 0; }
EOF
if { (eval echo configure:1990: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_GETHOSTBYNAME_R_6 1
EOF
 globus_gethostbyname_args=6
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
	 fi
	 echo "$ac_t""$globus_gethostbyname_args" 1>&6
	 break;
else
  echo "$ac_t""no" 1>&6
fi
done


fi

for ac_func in ctime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2015: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2020 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2043: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


if test $GLOBUS_THREADS != "none"; then
    for ac_func in ctime_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2072: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2077 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
            echo $ac_n "checking number of arguments to ctime_r""... $ac_c" 1>&6
echo "configure:2120: checking number of arguments to ctime_r" >&5
            globus_ctime_args=no
            cat > conftest.$ac_ext <<EOF
#line 2123 "configure"
#include "confdefs.h"

#               include <time.h>
            
int main() {

                time_t clock;
                char buf[26];
                ctime_r(&clock, buf);
            
; return 0; }
EOF
if { (eval echo configure:2136: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_CTIME_R_2 1
EOF
 globus_ctime_args=2
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
            if test $globus_ctime_args = no; then
                cat > conftest.$ac_ext <<EOF
#line 2149 "configure"
#include "confdefs.h"

#                   include <time.h>
                
int main() {

                    time_t clock;
                    char buf[26];
                    ctime_r(&clock, buf, 26);
                
; return 0; }
EOF
if { (eval echo configure:2162: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_CTIME_R_3 1
EOF
 globus_ctime_args=3
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
            fi
            echo "$ac_t""$globus_ctime_args" 1>&6
        
else
  echo "$ac_t""no" 1>&6
fi
done

fi

echo $ac_n "checking if struct passwd contains pw_age""... $ac_c" 1>&6
echo "configure:2184: checking if struct passwd contains pw_age" >&5
globus_pw_age=no;
cat > conftest.$ac_ext <<EOF
#line 2187 "configure"
#include "confdefs.h"

#       include <pwd.h>
    
int main() {

        struct passwd pwd;
        char *x;
        x = pwd.pw_age;
    
; return 0; }
EOF
if { (eval echo configure:2200: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_PW_AGE 1
EOF
 globus_pw_age=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
echo "$ac_t""$globus_pw_age" 1>&6

echo $ac_n "checking if struct passwd contains pw_comment""... $ac_c" 1>&6
echo "configure:2214: checking if struct passwd contains pw_comment" >&5
globus_pw_comment=no;
cat > conftest.$ac_ext <<EOF
#line 2217 "configure"
#include "confdefs.h"

#       include <pwd.h>
    
int main() {

        struct passwd pwd;
        char *x;
        x = pwd.pw_comment;
    
; return 0; }
EOF
if { (eval echo configure:2230: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_PW_COMMENT 1
EOF
 globus_pw_comment=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
echo "$ac_t""$globus_pw_comment" 1>&6


for ac_func in getpwnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2247: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2252 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

if test $GLOBUS_THREADS != "none"; then
for ac_func in getpwnam_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2303: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2308 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
        echo $ac_n "checking number of arguments to getpwnam_r""... $ac_c" 1>&6
echo "configure:2351: checking number of arguments to getpwnam_r" >&5
        globus_getpwnam_args=no;

        cat > conftest.$ac_ext <<EOF
#line 2355 "configure"
#include "confdefs.h"

#           include <sys/types.h>
#           include <pwd.h>
        
int main() {

            char *name;
            struct passwd *pwptr;
            struct passwd pwd;
            char *buf;
            size_t buflen;
            int rc;
	
            rc = getpwnam_r(name, &pwd, buf, buflen, &pwptr);
        
; return 0; }
EOF
if { (eval echo configure:2374: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_GETPWNAM_R_5 1
EOF
 globus_getpwnam_args=5
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*

        if test $globus_getpwnam_args = no; then
            cat > conftest.$ac_ext <<EOF
#line 2388 "configure"
#include "confdefs.h"

#           	include <sys/types.h>
#           	include <pwd.h>
            
int main() {

            	char *name;
            	struct passwd *pwptr;
            	struct passwd pwd;
            	char *buf;
            	int buflen;
	    
            	getpwnam_r(name, &pwd, buf, buflen);
            
; return 0; }
EOF
if { (eval echo configure:2406: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_GETPWNAM_R_4 1
EOF
 globus_getpwnam_args=4
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
        fi
        echo "$ac_t""$globus_getpwnam_args" 1>&6
    
else
  echo "$ac_t""no" 1>&6
fi
done

fi

for ac_func in getpwuid
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2430: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2435 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2458: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


if test $GLOBUS_THREADS != "none"; then
for ac_func in getpwuid_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2487: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2492 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2515: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
        echo $ac_n "checking number of arguments to getpwuid_r""... $ac_c" 1>&6
echo "configure:2535: checking number of arguments to getpwuid_r" >&5
        globus_getpwuid_args=no;

        cat > conftest.$ac_ext <<EOF
#line 2539 "configure"
#include "confdefs.h"

#           include <sys/types.h>
#           include <pwd.h>
        
int main() {

            uid_t uid;
            struct passwd *pwptr;
            struct passwd pwd;
            char *buf;
            size_t buflen;
            int rc;
	
            rc = getpwuid_r(uid, &pwd, buf, buflen, &pwptr);
        
; return 0; }
EOF
if { (eval echo configure:2558: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_GETPWUID_R_5 1
EOF
 globus_getpwuid_args=5
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*

        if test $globus_getpwuid_args = no; then
            cat > conftest.$ac_ext <<EOF
#line 2572 "configure"
#include "confdefs.h"

#           	include <sys/types.h>
#           	include <pwd.h>
            
int main() {

	    	uid_t uid;
            	struct passwd *pwptr;
            	struct passwd pwd;
            	char *buf;
            	int buflen;
	    
            	getpwuid_r(uid, &pwd, buf, buflen);
            
; return 0; }
EOF
if { (eval echo configure:2590: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_GETPWUID_R_4 1
EOF
 globus_getpwuid_args=4
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
        fi
        echo "$ac_t""$globus_getpwuid_args" 1>&6
    
else
  echo "$ac_t""no" 1>&6
fi
done

fi

if test $GLOBUS_THREADS != "none"; then
for ac_func in readdir_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2615: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2620 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
        echo $ac_n "checking number of arguments to readdir_r""... $ac_c" 1>&6
echo "configure:2663: checking number of arguments to readdir_r" >&5
        globus_readdir_args=no;
        cat > conftest.$ac_ext <<EOF
#line 2666 "configure"
#include "confdefs.h"

#if defined(HAVE_DIRENT_H)
#   include <dirent.h>
#   define NAMLEN(dirent) strlen((dirent)->d_name)
#else
#   define dirent direct
#   define NAMLEN(dirent) (dirent)->d_namlen
#   if defined(HAVE_SYS_NDIR_H)
#       include <sys/ndir.h>
#   endif
#   if defined(HAVE_SYS_DIR_H)
#       include <sys/dir.h>
#   endif
#   if defined(HAVE_NDIR_H)
#       include <ndir.h>
#   endif
#endif
        
int main() {

	    struct dirent dir, *dirp;
	    DIR *mydir;
	    int rc;
	    rc = readdir_r(mydir, &dir, &dirp);
        
; return 0; }
EOF
if { (eval echo configure:2695: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_READDIR_R_3 1
EOF
 globus_readdir_args=3
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*


        if test $globus_readdir_args = no; then
            cat > conftest.$ac_ext <<EOF
#line 2710 "configure"
#include "confdefs.h"

#if defined(HAVE_DIRENT_H)
#   include <dirent.h>
#   define NAMLEN(dirent) strlen((dirent)->d_name)
#else
#   define dirent direct
#   define NAMLEN(dirent) (dirent)->d_namlen
#   if defined(HAVE_SYS_NDIR_H)
#       include <sys/ndir.h>
#   endif
#   if defined(HAVE_SYS_DIR_H)
#       include <sys/dir.h>
#   endif
#   if defined(HAVE_NDIR_H)
#       include <ndir.h>
#   endif
#endif
            
int main() {

	    	struct dirent dir, *dirp;
	    	DIR *mydir;
	    	dirp = readdir_r(mydir, &dir);
            
; return 0; }
EOF
if { (eval echo configure:2738: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_READDIR_R_2 1
EOF
 globus_readdir_args=2
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
        fi
        echo "$ac_t""$globus_readdir_args" 1>&6
    
else
  echo "$ac_t""no" 1>&6
fi
done

fi

echo $ac_n "checking if struct dirent contains d_off""... $ac_c" 1>&6
echo "configure:2760: checking if struct dirent contains d_off" >&5
cat > conftest.$ac_ext <<EOF
#line 2762 "configure"
#include "confdefs.h"

#if defined(HAVE_DIRENT_H)
#   include <dirent.h>
#   define NAMLEN(dirent) strlen((dirent)->d_name)
#else
#   define dirent direct
#   define NAMLEN(dirent) (dirent)->d_namlen
#   if defined(HAVE_SYS_NDIR_H)
#       include <sys/ndir.h>
#   endif
#   if defined(HAVE_SYS_DIR_H)
#       include <sys/dir.h>
#   endif
#   if defined(HAVE_NDIR_H)
#       include <ndir.h>
#   endif
#endif
    
int main() {

        struct dirent dir;
        ((int) dir.d_off) == 1;
    
; return 0; }
EOF
if { (eval echo configure:2789: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  echo "$ac_t"""yes"" 1>&6; cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_DIRENT_OFF 1
EOF

else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  echo "$ac_t"""no"" 1>&6
fi
rm -f conftest*

echo $ac_n "checking if struct dirent contains d_offset""... $ac_c" 1>&6
echo "configure:2804: checking if struct dirent contains d_offset" >&5
cat > conftest.$ac_ext <<EOF
#line 2806 "configure"
#include "confdefs.h"

#if defined(HAVE_DIRENT_H)
#   include <dirent.h>
#   define NAMLEN(dirent) strlen((dirent)->d_name)
#else
#   define dirent direct
#   define NAMLEN(dirent) (dirent)->d_namlen
#   if defined(HAVE_SYS_NDIR_H)
#       include <sys/ndir.h>
#   endif
#   if defined(HAVE_SYS_DIR_H)
#       include <sys/dir.h>
#   endif
#   if defined(HAVE_NDIR_H)
#       include <ndir.h>
#   endif
#endif
    
int main() {

struct dirent dir;
((int) dir.d_offset) == 1;
    
; return 0; }
EOF
if { (eval echo configure:2833: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  echo "$ac_t"""yes"" 1>&6 ; cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_DIRENT_OFFSET 1
EOF

else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  echo "$ac_t"""no"" 1>&6
fi
rm -f conftest*

echo $ac_n "checking if struct dirent contains d_type""... $ac_c" 1>&6
echo "configure:2848: checking if struct dirent contains d_type" >&5
cat > conftest.$ac_ext <<EOF
#line 2850 "configure"
#include "confdefs.h"

#if defined(HAVE_DIRENT_H)
#   include <dirent.h>
#   define NAMLEN(dirent) strlen((dirent)->d_name)
#else
#   define dirent direct
#   define NAMLEN(dirent) (dirent)->d_namlen
#   if defined(HAVE_SYS_NDIR_H)
#       include <sys/ndir.h>
#   endif
#   if defined(HAVE_SYS_DIR_H)
#       include <sys/dir.h>
#   endif
#   if defined(HAVE_NDIR_H)
#       include <ndir.h>
#   endif
#endif
    
int main() {

struct dirent dir;
((int) dir.d_type) == 1;
    
; return 0; }
EOF
if { (eval echo configure:2877: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  echo "$ac_t"""yes"" 1>&6 ; cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_DIRENT_TYPE 1
EOF

else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  echo "$ac_t"""no"" 1>&6
fi
rm -f conftest*

echo $ac_n "checking if struct dirent contains d_reclen""... $ac_c" 1>&6
echo "configure:2892: checking if struct dirent contains d_reclen" >&5
cat > conftest.$ac_ext <<EOF
#line 2894 "configure"
#include "confdefs.h"

#if defined(HAVE_DIRENT_H)
#   include <dirent.h>
#   define NAMLEN(dirent) strlen((dirent)->d_name)
#else
#   define dirent direct
#   define NAMLEN(dirent) (dirent)->d_namlen
#   if defined(HAVE_SYS_NDIR_H)
#       include <sys/ndir.h>
#   endif
#   if defined(HAVE_SYS_DIR_H)
#       include <sys/dir.h>
#   endif
#   if defined(HAVE_NDIR_H)
#       include <ndir.h>
#   endif
#endif
    
int main() {

struct dirent dir;
((int) dir.d_reclen) == 1;
    
; return 0; }
EOF
if { (eval echo configure:2921: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  echo "$ac_t"""yes"" 1>&6 ; cat >> confdefs.h <<\EOF
#define GLOBUS_HAVE_DIRENT_RECLEN 1
EOF

else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  echo "$ac_t"""no"" 1>&6
fi
rm -f conftest*






echo $ac_n "checking for -lnsl""... $ac_c" 1>&6
echo "configure:2941: checking for -lnsl" >&5

cat > conftest.$ac_ext <<EOF
#line 2944 "configure"
#include "confdefs.h"

	#include <netdb.h>
    
int main() {

	struct hostent * host;
  	host = gethostbyname("localhost");
    
; return 0; }
EOF
if { (eval echo configure:2956: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  
	lac_cv_lnsl="no"	
    
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
	lac_cv_lnsl="yes"
	EXTERNAL_LIBS="$EXTERNAL_LIBS -lnsl"
    

fi
rm -f conftest*

echo "$ac_t""$lac_cv_lnsl" 1>&6





	GPT_LIBS_TMP="$THREAD_LIB_FLAGS $EXTERNAL_LIBS"
	GPT_EXTERNAL_LIBS="$GPT_EXTERNAL_LIBS $GPT_LIBS_TMP"
	GPT_LIB_LINKS=" $GPT_LIB_LINKS $GPT_LIBS_TMP"
	GPT_PGM_LINKS=" $GPT_PGM_LINKS $GPT_LIBS_TMP"




if test "$GLOBUS_THREADS" = "none" ; then
    GLOBUS_CALLBACK_BUILD="nothreads"
else
    GLOBUS_CALLBACK_BUILD="threads"
fi




    # Check whether --enable-doxygen or --disable-doxygen was given.
if test "${enable_doxygen+set}" = set; then
  enableval="$enable_doxygen"
      
        if test "$enableval" = "yes"; then
        # Extract the first word of "doxygen", so it can be a program name with args.
set dummy doxygen; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3004: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DOXYGEN'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$DOXYGEN" in
  /*)
  ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_DOXYGEN="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_DOXYGEN" && ac_cv_path_DOXYGEN="
            { echo "configure: error: Doxygen installation not found" 1>&2; exit 1; }
            "
  ;;
esac
fi
DOXYGEN="$ac_cv_path_DOXYGEN"
if test -n "$DOXYGEN"; then
  echo "$ac_t""$DOXYGEN" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

        else
        DOXYGEN="$enableval"
        
        fi
    
else
  
        DOXYGEN=""
        
    
fi



    # Check whether --enable-internal-doc or --disable-internal-doc was given.
if test "${enable_internal_doc+set}" = set; then
  enableval="$enable_internal_doc"
  
    DOXYFILE="Doxyfile-internal"
     
    
else
  
    DOXYFILE="Doxyfile"
    
    
fi



    if test -n "$DOXYGEN" ; then
    # Extract the first word of "dot", so it can be a program name with args.
set dummy dot; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3073: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DOT'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$DOT" in
  /*)
  ac_cv_path_DOT="$DOT" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_DOT="$DOT" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_DOT="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
DOT="$ac_cv_path_DOT"
if test -n "$DOT"; then
  echo "$ac_t""$DOT" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

    
    if test -z "$GLOBUS_SH_PERL" ; then
        # Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3110: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$PERL" in
  /*)
  ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_PERL="$PERL" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_PERL="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
PERL="$ac_cv_path_PERL"
if test -n "$PERL"; then
  echo "$ac_t""$PERL" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

    else
        PERL="$GLOBUS_SH_PERL"
        
    fi
    if test "$DOT" != ""; then
        HAVE_DOT=YES
    else
        HAVE_DOT=NO
    fi

    

    
    lac_doxygen_srcdirs="../library"
    

    
    lac_doxygen_file_patterns=
   

    
    lac_doxygen_project=`echo "$GPT_NAME" | sed -e 's/_/ /g'`
    

    
    lac_doxygen_output_tagfile=$GPT_NAME
    


    lac_dep_check="$GLOBUS_LOCATION/sbin/globus-build-doxygen-dependencies"

    if test ! -x $lac_dep_check ; then

        # assume we are dealing with common
        
        lac_dep_check="$srcdir/scripts/globus-build-doxygen-dependencies"
        chmod 0755 $lac_dep_check

    fi

    echo $ac_n "checking documentation dependencies""... $ac_c" 1>&6
echo "configure:3183: checking documentation dependencies" >&5

    tagfiles="`$lac_dep_check -src $srcdir/pkgdata/pkg_data_src.gpt.in 2>/dev/null`"
    if test "$?" != "0"; then
        echo "$ac_t""failed" 1>&6
        { echo "configure: error: Documentation dependencies could not be satisfied." 1>&2; exit 1; }
    else
        echo "$ac_t""ok" 1>&6
    fi

    
    lac_doxygen_tagfiles=""
    for x in "" $tagfiles; do
        if test "X$x" != "X" ; then
        lac_tag_base=`echo ${x} | sed -e 's|.*/||' -e 's|\.tag$||'`
        lac_tag="${lac_tag_base}.tag"
            lac_doxygen_tagfiles="$lac_doxygen_tagfiles $x"
            lac_doxygen_internal_tagfiles="$lac_doxygen_internal_tagfiles ${x}i"
        lac_doxygen_installdox="$lac_doxygen_installdox -l${lac_tag}@../../${lac_tag_base}/html"
    fi
    done
    
    
    


    
    
    
    fi





lac_INSURE=$INSURE

# Check whether --enable-insure or --disable-insure was given.
if test "${enable_insure+set}" = set; then
  enableval="$enable_insure"
  	
		if test "$enableval" = "yes"; then
			lac_INSURE="${INSURE-insure}"
		else
			lac_INSURE="$enableval"
		fi
	
else
  
		lac_INSURE=""
	
fi



if test ! -z "$lac_INSURE"; then
	CC=$lac_INSURE
	LD=$lac_INSURE
	CXX=$lac_INSURE
	 
	 
	 
fi 



trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr `echo "Makefile
	pkgdata/Makefile
	pkgdata/pkg_data_src.gpt
	library/Makefile
	programs/Makefile
	programs/globus-sh-exec
	scripts/Makefile
	config/Makefile
	doxygen/Makefile
	doxygen/Doxyfile 
	doxygen/Doxyfile-internal
	version.h
 config.h library/globus_common.h:library/globus_common.h.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
s%@GPT_LOCATION@%$GPT_LOCATION%g
s%@GPT_IS_2@%$GPT_IS_2%g
s%@GPT_CFLAGS@%$GPT_CFLAGS%g
s%@GPT_PKG_CFLAGS@%$GPT_PKG_CFLAGS%g
s%@GPT_INCLUDES@%$GPT_INCLUDES%g
s%@GPT_EXTERNAL_INCLUDES@%$GPT_EXTERNAL_INCLUDES%g
s%@GPT_EXTERNAL_LIBS@%$GPT_EXTERNAL_LIBS%g
s%@GPT_LIBS@%$GPT_LIBS%g
s%@GPT_LDFLAGS@%$GPT_LDFLAGS%g
s%@GPT_CONFIG_CFLAGS@%$GPT_CONFIG_CFLAGS%g
s%@GPT_CONFIG_INCLUDES@%$GPT_CONFIG_INCLUDES%g
s%@GPT_CONFIG_LIBS@%$GPT_CONFIG_LIBS%g
s%@GPT_CONFIG_PKG_LIBS@%$GPT_CONFIG_PKG_LIBS%g
s%@GPT_PGM_LINKS@%$GPT_PGM_LINKS%g
s%@GPT_LIB_LINKS@%$GPT_LIB_LINKS%g
s%@GPT_LINKTYPE@%$GPT_LINKTYPE%g
s%@builddir@%$builddir%g
s%@WITHOUT_FLAVORS_TRUE@%$WITHOUT_FLAVORS_TRUE%g
s%@WITHOUT_FLAVORS_FALSE@%$WITHOUT_FLAVORS_FALSE%g
s%@GLOBUS_FLAVOR_NAME@%$GLOBUS_FLAVOR_NAME%g
s%@CC@%$CC%g
s%@CPP@%$CPP%g
s%@LD@%$LD%g
s%@CXX@%$CXX%g
s%@CXXCPP@%$CXXCPP%g
s%@INSURE@%$INSURE%g
s%@DOXYGEN@%$DOXYGEN%g
s%@F77@%$F77%g
s%@F77FLAGS@%$F77FLAGS%g
s%@F90@%$F90%g
s%@F90FLAGS@%$F90FLAGS%g
s%@AR@%$AR%g
s%@ARFLAGS@%$ARFLAGS%g
s%@RANLIB@%$RANLIB%g
s%@PERL@%$PERL%g
s%@CROSS@%$CROSS%g
s%@cross_compiling@%$cross_compiling%g
s%@OBJEXT@%$OBJEXT%g
s%@EXEEXT@%$EXEEXT%g
s%@FILELIST_FILE@%$FILELIST_FILE%g
s%@GPT_MAJOR_VERSION@%$GPT_MAJOR_VERSION%g
s%@GPT_MINOR_VERSION@%$GPT_MINOR_VERSION%g
s%@DIRT_TIMESTAMP@%$DIRT_TIMESTAMP%g
s%@DIRT_BRANCH_ID@%$DIRT_BRANCH_ID%g
s%@LIBTOOL@%$LIBTOOL%g
s%@LN_S@%$LN_S%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
s%@ACLOCAL@%$ACLOCAL%g
s%@AUTOCONF@%$AUTOCONF%g
s%@AUTOMAKE@%$AUTOMAKE%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@THREAD_LIB_FLAGS@%$THREAD_LIB_FLAGS%g
s%@GLOBUS_THREADS@%$GLOBUS_THREADS%g
s%@GLOBUS_CALLBACK_BUILD@%$GLOBUS_CALLBACK_BUILD%g
s%@DOXYFILE@%$DOXYFILE%g
s%@DOT@%$DOT%g
s%@HAVE_DOT@%$HAVE_DOT%g
s%@lac_doxygen_srcdirs@%$lac_doxygen_srcdirs%g
s%@lac_doxygen_project@%$lac_doxygen_project%g
s%@lac_doxygen_output_tagfile@%$lac_doxygen_output_tagfile%g
s%@lac_doxygen_tagfiles@%$lac_doxygen_tagfiles%g
s%@lac_doxygen_internal_tagfiles@%$lac_doxygen_internal_tagfiles%g
s%@lac_doxygen_installdox@%$lac_doxygen_installdox%g
s%@lac_doxygen_file_patterns@%$lac_doxygen_file_patterns%g
s%@lac_doxygen_examples@%$lac_doxygen_examples%g
s%@lac_doxygen_predefines@%$lac_doxygen_predefines%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"Makefile
	pkgdata/Makefile
	pkgdata/pkg_data_src.gpt
	library/Makefile
	programs/Makefile
	programs/globus-sh-exec
	scripts/Makefile
	config/Makefile
	doxygen/Makefile
	doxygen/Doxyfile 
	doxygen/Doxyfile-internal
	version.h
"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  [/$]*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_uB='\([ 	]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'

if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
  CONFIG_HEADERS="config.h library/globus_common.h:library/globus_common.h.in"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  echo creating $ac_file

  rm -f conftest.frag conftest.in conftest.out
  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  cat $ac_file_inputs > conftest.in

EOF

# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h.  And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF

# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.

rm -f conftest.tail
while :
do
  ac_lines=`grep -c . conftest.vals`
  # grep -c gives empty output for an empty file on some AIX systems.
  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
  # Write a limited-size here document to conftest.frag.
  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
  echo 'CEOF
  sed -f conftest.frag conftest.in > conftest.out
  rm -f conftest.in
  mv conftest.out conftest.in
' >> $CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
  rm -f conftest.vals
  mv conftest.tail conftest.vals
done
rm -f conftest.vals

cat >> $CONFIG_STATUS <<\EOF
  rm -f conftest.frag conftest.h
  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
  cat conftest.in >> conftest.h
  rm -f conftest.in
  if cmp -s $ac_file conftest.h 2>/dev/null; then
    echo "$ac_file is unchanged"
    rm -f conftest.h
  else
    # Remove last slash and all that follows it.  Not all systems have dirname.
      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
      # The file is in a subdirectory.
      test ! -d "$ac_dir" && mkdir "$ac_dir"
    fi
    rm -f $ac_file
    mv conftest.h $ac_file
  fi
fi; done

EOF
cat >> $CONFIG_STATUS <<EOF


EOF
cat >> $CONFIG_STATUS <<\EOF
am_indx=1
for am_file in config.h library/globus_common.h:library/globus_common.h.in; do
  case " $CONFIG_HEADERS " in
  *" $am_file "*)
    echo timestamp > `echo $am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
    ;;
  esac
  am_indx=`expr "$am_indx" + 1`
done

exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1






