#! /bin/sh

#
# Copyright (c) 1999,2000 WU-FTPD Development Group.  
# All rights reserved.
#  
# Portions Copyright (c) 1980, 1985, 1988, 1989, 1990, 1991, 1993, 1994  
#   The Regents of the University of California. 
# Portions Copyright (c) 1993, 1994 Washington University in Saint Louis.  
# Portions Copyright (c) 1996, 1998 Berkeley Software Design, Inc.  
# Portions Copyright (c) 1989 Massachusetts Institute of Technology.  
# Portions Copyright (c) 1998 Sendmail, Inc.  
# Portions Copyright (c) 1983, 1995, 1996, 1997 Eric P.  Allman.  
# Portions Copyright (c) 1997 by Stan Barber.  
# Portions Copyright (c) 1997 by Kent Landfield.  
# Portions Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997  
#   Free Software Foundation, Inc.    
#  
# Use and distribution of this software and its source code are governed   
# by the terms and conditions of the WU-FTPD Software License ("LICENSE").  
#  
# If you did not receive a copy of the license, it may be obtained online  
# at http://www.wu-ftpd.org/license.html.  
#
# $Id: configure.in,v 1.24 2002/03/23 01:18:57 meder Exp $
#





























# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13 
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.

# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_default_prefix=${GLOBUS_LOCATION:-/usr}
ac_help="$ac_help
	  --enable-doxygen[=PATH]	use Doxygen to generate documentation"
ac_help="$ac_help
  --enable-internal-doc	Generate Doxygen documentation for
				 internal functions. Requires --enable-doxygen"
ac_help="$ac_help
  --with-etc-dir=PATH     read-only single-machine data in DIR [/etc]"
ac_help="$ac_help
  --with-pid-dir=PATH     run/pid files [/var/run]"
ac_help="$ac_help
  --with-log-dir=PATH     log files [/var/log]"
ac_help="$ac_help
  --disable-upload        disable the UPLOAD keyword in ftpaccess"
ac_help="$ac_help
  --disable-overwrite     disable the OVERWRITE keyword in ftpaccess"
ac_help="$ac_help
  --disable-hostxs        don't allow ALLOW/DENY keywords in ftpaccess"
ac_help="$ac_help
  --disable-logfailed     don't log failed login attempts"
ac_help="$ac_help
  --disable-logtoomany    don't log login attempts that failed because of limits"
ac_help="$ac_help
  --disable-private       don't support private files (SITE GROUP/SITE GPASS)"
ac_help="$ac_help
  --disable-dnsretry      don't retry failed DNS lookups"
ac_help="$ac_help
  --enable-anononly       allow only anonymous ftp connections"
ac_help="$ac_help
  --enable-paranoid       disable some "questionable" features"
ac_help="$ac_help
  --enable-quota          add QUOTA support (if your OS supports it)"
ac_help="$ac_help
  --enable-pam            add PAM support (needs PAM library)"
ac_help="$ac_help
  --enable-skey           add S/KEY support (needs SKEY libraries)"
ac_help="$ac_help
  --enable-opie           add OPIE support (needs OPIE libraries)"
ac_help="$ac_help
  --disable-new-cd        new-cd causes \"cd ~\" to return to chroot-relative dir"
ac_help="$ac_help
  --enable-chmod          allow ftp users to set SETUID/SETGID/STICKY bits"
ac_help="$ac_help
  --enable-rfc931         do RFC931 lookups (more log information, but slower)"
ac_help="$ac_help
  --enable-ratios         compile in support for upload-download ratios "
ac_help="$ac_help
  --enable-passwd         support alternative passwd/shadow files "
ac_help="$ac_help
  --disable-daemon        don't allow running as standalone daemon"
ac_help="$ac_help
  --disable-map-chdir     don't keep track of user's path changes"
ac_help="$ac_help
  --disable-throughput    don't keep track of user's throughput"
ac_help="$ac_help
  --disable-count         don't keep track of bytes for statistics"
ac_help="$ac_help
  --disable-newlines      suppress some extra blank lines"
ac_help="$ac_help
  --enable-crackers       don't wait for password if the username doesn't exist"
ac_help="$ac_help
  --disable-verbose       disable verbose error logging"
ac_help="$ac_help
  --enable-noop           NOOP command resets idle timeout"
ac_help="$ac_help
  --disable-log-rp        log the relative path rather than the real one"
ac_help="$ac_help
  --disable-virtual       don't support virtual servers"
ac_help="$ac_help
  --disable-closedvirt    allow guests to log in to a virtual server"
ac_help="$ac_help
  --disable-dns           skip all DNS lookups"
ac_help="$ac_help
  --disable-port          don't allow port mode"
ac_help="$ac_help
  --disable-pasv          don't allow passive mode"
ac_help="$ac_help
  --disable-plsm          disable PID lock sleep messages (for busy sites)"
ac_help="$ac_help
  --disable-pasvip        don't require require same IP for passive connections"
ac_help="$ac_help
  --disable-anonymous     don't allow anonymous ftp access"
ac_help="$ac_help
  --enable-ls             use the internal ls (EXPERIMENTAL)"
ac_help="$ac_help
  --disable-numericuid    internal ls displays UID instead of username (faster)"
ac_help="$ac_help
  --disable-hidesetuid    show setuid/setgid bits in internal ls"
ac_help="$ac_help
  --disable-mail          don't allow mail on upload"
ac_help="$ac_help
  --enable-badclients     support broken clients (see CHANGES)"
ac_help="$ac_help
  --with-bufsize=x        set buffer size to x"
ac_help="$ac_help
  --with-backlog=x        number of incoming processes to backlog in daemon mode"
ac_help="$ac_help
  --enable-gssapi=<type>  Specify type of GSSAPI [default=globus]
                          Options are: none, krb5, globus, gsi"
ac_help="$ac_help
  --enable-authorization=<type>
                          Type of authorization : krb5 or gridmap
			  gridmap always used with globus or gsi
			  and can be used with krb5"
ac_help="$ac_help
 --enable-static-only      Don't do any dynamic linking"
ac_help="$ac_help
  --with-globus-paths     Use ftp configuration files in \$GLOBUS_LOCATION"
ac_help="$ac_help
  --with-flavor=FLAVOR    Choose globus flavor"
ac_help="$ac_help
  --with-krb5-dir=<DIR>   Location of krb5"
ac_help="$ac_help
  --with-globus-dir=<DIR> Location of globus or gsi"
ac_help="$ac_help
  --with-globus-authorization   Use Globus authorization libraries"
ac_help="$ac_help
  --disable-globus-data   don't use globus data code"
ac_help="$ac_help
  --with-afs=<PATH>	  Use transarc AFS libraries"
ac_help="$ac_help
  --with-krbafs=<PATH>    Use libkrbafs libraries"
ac_help="$ac_help
  --with-post-auth-process=<process>  Specify process to run after authentication"
ac_help="$ac_help
  --disable-largefile     omit support for large files"

# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'

# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12

ac_prev=
for ac_option
do

  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval "$ac_prev=\$ac_option"
    ac_prev=
    continue
  fi

  case "$ac_option" in
  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) ac_optarg= ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case "$ac_option" in

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir="$ac_optarg" ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build="$ac_optarg" ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file="$ac_optarg" ;;

  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
  | --da=*)
    datadir="$ac_optarg" ;;

  -disable-* | --disable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    eval "enable_${ac_feature}=no" ;;

  -enable-* | --enable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "enable_${ac_feature}='$ac_optarg'" ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix="$ac_optarg" ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he)
    # Omit some internal or obsolete options to make the list less imposing.
    # This message is too long to be a string in the A/UX 3.1 sh.
    cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
  --cache-file=FILE       cache test results in FILE
  --help                  print this message
  --no-create             do not create output files
  --quiet, --silent       do not print \`checking...' messages
  --version               print the version of autoconf that created configure
Directory and file names:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [same as prefix]
  --bindir=DIR            user executables in DIR [EPREFIX/bin]
  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
  --datadir=DIR           read-only architecture-independent data in DIR
                          [PREFIX/share]
  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
                          [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
  --includedir=DIR        C header files in DIR [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
  --infodir=DIR           info documentation in DIR [PREFIX/info]
  --mandir=DIR            man documentation in DIR [PREFIX/man]
  --srcdir=DIR            find the sources in DIR [configure dir or ..]
  --program-prefix=PREFIX prepend PREFIX to installed program names
  --program-suffix=SUFFIX append SUFFIX to installed program names
  --program-transform-name=PROGRAM
                          run sed PROGRAM on installed program names
EOF
    cat << EOF
Host type:
  --build=BUILD           configure for building on BUILD [BUILD=HOST]
  --host=HOST             configure for HOST [guessed]
  --target=TARGET         configure for TARGET [TARGET=HOST]
Features and packages:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --x-includes=DIR        X include files are in DIR
  --x-libraries=DIR       X library files are in DIR
EOF
    if test -n "$ac_help"; then
      echo "--enable and --with options recognized:$ac_help"
    fi
    exit 0 ;;

  -host | --host | --hos | --ho)
    ac_prev=host ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host="$ac_optarg" ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir="$ac_optarg" ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir="$ac_optarg" ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir="$ac_optarg" ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir="$ac_optarg" ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst \
  | --locals | --local | --loca | --loc | --lo)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
    localstatedir="$ac_optarg" ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir="$ac_optarg" ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir="$ac_optarg" ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix="$ac_optarg" ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix="$ac_optarg" ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix="$ac_optarg" ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name="$ac_optarg" ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir="$ac_optarg" ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir="$ac_optarg" ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site="$ac_optarg" ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir="$ac_optarg" ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir="$ac_optarg" ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target="$ac_optarg" ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers)
    echo "configure generated by autoconf version 2.13"
    exit 0 ;;

  -with-* | --with-*)
    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "with_${ac_package}='$ac_optarg'" ;;

  -without-* | --without-*)
    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    eval "with_${ac_package}=no" ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes="$ac_optarg" ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries="$ac_optarg" ;;

  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
    ;;

  *)
    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
      echo "configure: warning: $ac_option: invalid host type" 1>&2
    fi
    if test "x$nonopt" != xNONE; then
      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
    fi
    nonopt="$ac_option"
    ;;

  esac
done

if test -n "$ac_prev"; then
  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>./config.log

echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5

# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
  case "$ac_arg" in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
  esac
done

# NLS nuisances.
# Only set these to C if already set.  These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=src/ftpd.c

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then its parent.
  ac_prog=$0
  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
  srcdir=$ac_confdir
  if test ! -r $srcdir/$ac_unique_file; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
  if test "$ac_srcdir_defaulted" = yes; then
    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
  else
    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
  fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`

# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    echo "loading site script $ac_site_file"
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='	'
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi





ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.


# Do some error checking and defaulting for the host and target type.
# The inputs are:
#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
#
# The rules are:
# 1. You are not allowed to specify --host, --target, and nonopt at the
#    same time.
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
#    as determined by config.guess.
# 4. Target and build default to nonopt.
# 5. If nonopt is not specified, then target and build default to host.

# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
case $host---$target---$nonopt in
NONE---*---* | *---NONE---* | *---*---NONE) ;;
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac


# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:754: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6

echo $ac_n "checking target system type""... $ac_c" 1>&6
echo "configure:775: checking target system type" >&5

target_alias=$target
case "$target_alias" in
NONE)
  case $nonopt in
  NONE) target_alias=$host_alias ;;
  *) target_alias=$nonopt ;;
  esac ;;
esac

target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6

echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:793: checking build system type" >&5

build_alias=$build
case "$build_alias" in
NONE)
  case $nonopt in
  NONE) build_alias=$host_alias ;;
  *) build_alias=$nonopt ;;
  esac ;;
esac

build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6

test "$host_alias" != "$target_alias" &&
  test "$program_prefix$program_suffix$program_transform_name" = \
    NONENONEs,x,x, &&
  program_prefix=${target_alias}-

# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:818: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="gcc"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:848: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_prog_rejected=no
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
	continue
      fi
      ac_cv_prog_CC="cc"
      break
    fi
  done
  IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# -gt 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    set dummy "$ac_dir/$ac_word" "$@"
    shift
    ac_cv_prog_CC="$@"
  fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test -z "$CC"; then
    case "`uname -s`" in
    *win32* | *WIN32*)
      # Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:899: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="cl"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
 ;;
    esac
  fi
  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi

echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:931: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext << EOF

#line 942 "configure"
#include "confdefs.h"

main(){return(0);}
EOF
if { (eval echo configure:947: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cc_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cc_cross=no
  else
    ac_cv_prog_cc_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:973: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross

echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:978: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:987: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gcc=yes
else
  ac_cv_prog_gcc=no
fi
fi

echo "$ac_t""$ac_cv_prog_gcc" 1>&6

if test $ac_cv_prog_gcc = yes; then
  GCC=yes
else
  GCC=
fi

ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1006: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
  ac_cv_prog_cc_g=yes
else
  ac_cv_prog_cc_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi

echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
echo "configure:1038: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
  grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
  echo "$ac_t""yes" 1>&6
  ISC=yes # If later tests want to check for ISC.
  cat >> confdefs.h <<\EOF
#define _POSIX_SOURCE 1
EOF

  if test "$GCC" = yes; then
    CC="$CC -posix"
  else
    CC="$CC -Xp"
  fi
else
  echo "$ac_t""no" 1>&6
  ISC=
fi

# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1061: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

for ac_prog in 'bison -y' byacc
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1093: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$YACC"; then
  ac_cv_prog_YACC="$YACC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_YACC="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
YACC="$ac_cv_prog_YACC"
if test -n "$YACC"; then
  echo "$ac_t""$YACC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

test -n "$YACC" && break
done
test -n "$YACC" || YACC="yacc"

# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:1135: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
  for ac_dir in $PATH; do
    # Account for people who put trailing slashes in PATH elements.
    case "$ac_dir/" in
    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if test -f $ac_dir/$ac_prog; then
	  if test $ac_prog = install &&
            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done
  IFS="$ac_save_IFS"

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL="$ac_cv_path_install"
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL="$ac_install_sh"
  fi
fi
echo "$ac_t""$INSTALL" 1>&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'

for ac_prog in ar gar
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1192: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$AR"; then
  ac_cv_prog_AR="$AR" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_AR="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
AR="$ac_cv_prog_AR"
if test -n "$AR"; then
  echo "$ac_t""$AR" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

test -n "$AR" && break
done
test -n "$AR" || AR="NO"

if test $AR = NO; then
  { echo "configure: error: Can\'t find ar or gar." 1>&2; exit 1; }
fi

echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1227: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 1242 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1248: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -E -traditional-cpp"
  cat > conftest.$ac_ext <<EOF
#line 1259 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1265: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -nologo -E"
  cat > conftest.$ac_ext <<EOF
#line 1276 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1282: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
  ac_cv_prog_CPP="$CPP"
fi
  CPP="$ac_cv_prog_CPP"
else
  ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6

echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
echo "configure:1307: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1312 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1320: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  ac_cv_header_stdc=yes
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

if test $ac_cv_header_stdc = yes; then
  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1337 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "memchr" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1355 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "free" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then
  :
else
  cat > conftest.$ac_ext <<EOF
#line 1376 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int main () { int i; for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }

EOF
if { (eval echo configure:1387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_header_stdc=no
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_header_stdc" 1>&6
if test $ac_cv_header_stdc = yes; then
  cat >> confdefs.h <<\EOF
#define STDC_HEADERS 1
EOF

fi

echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
echo "configure:1411: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1416 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
#include <time.h>
int main() {
struct tm *tp;
; return 0; }
EOF
if { (eval echo configure:1425: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_header_time=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_header_time=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_header_time" 1>&6
if test $ac_cv_header_time = yes; then
  cat >> confdefs.h <<\EOF
#define TIME_WITH_SYS_TIME 1
EOF

fi


    # Check whether --enable-doxygen or --disable-doxygen was given.
if test "${enable_doxygen+set}" = set; then
  enableval="$enable_doxygen"
  	
	    if test "$enableval" = "yes"; then
		# Extract the first word of "doxygen", so it can be a program name with args.
set dummy doxygen; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1454: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DOXYGEN'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$DOXYGEN" in
  /*)
  ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_DOXYGEN="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_DOXYGEN" && ac_cv_path_DOXYGEN="
			{ echo "configure: error: Doxygen installation not found" 1>&2; exit 1; }
		    "
  ;;
esac
fi
DOXYGEN="$ac_cv_path_DOXYGEN"
if test -n "$DOXYGEN"; then
  echo "$ac_t""$DOXYGEN" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

	    else
		DOXYGEN="$enableval"
		
	    fi
	
else
  
	    DOXYGEN=""
	    
	
fi



    # Check whether --enable-internal-doc or --disable-internal-doc was given.
if test "${enable_internal_doc+set}" = set; then
  enableval="$enable_internal_doc"
  
	DOXYFILE="Doxyfile-internal"
	 
    
else
  
	DOXYFILE="Doxyfile"
	
    
fi



    if test -n "$DOXYGEN" ; then
	# Extract the first word of "dot", so it can be a program name with args.
set dummy dot; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1523: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DOT'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$DOT" in
  /*)
  ac_cv_path_DOT="$DOT" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_DOT="$DOT" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_DOT="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
DOT="$ac_cv_path_DOT"
if test -n "$DOT"; then
  echo "$ac_t""$DOT" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

	
	if test -z "$GLOBUS_SH_PERL" ; then
	   # Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1560: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$PERL" in
  /*)
  ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_PERL="$PERL" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_PERL="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
PERL="$ac_cv_path_PERL"
if test -n "$PERL"; then
  echo "$ac_t""$PERL" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

	else
	    PERL="$GLOBUS_SH_PERL"
	    
	fi
	if test "$DOT" != ""; then
	    HAVE_DOT=YES
	else
	    HAVE_DOT=NO
	fi

	

	
    lac_doxygen_srcdirs=.
    

	
    lac_doxygen_file_patterns=
	

	
    lac_doxygen_project=`echo "$GPT_NAME" | sed -e 's/_/ /g'`
    

	
    lac_doxygen_output_tagfile=$GPT_NAME
    


	
    lac_doxygen_tagfiles=""
    for x in "" $tagfiles; do
        if test "X$x" != "X" ; then
	    lac_tag_base=`echo ${x} | sed -e 's|.*/||' -e 's|\.tag$||'`
	    lac_tag="${lac_tag_base}.tag"
            lac_doxygen_tagfiles="$lac_doxygen_tagfiles $x"
            lac_doxygen_internal_tagfiles="$lac_doxygen_internal_tagfiles ${x}i"
	    lac_doxygen_installdox="$lac_doxygen_installdox -l${lac_tag}@../../${lac_tag_base}/html"
	fi
    done
    
    
    


	
	
	
    fi



cat >> confdefs.h <<\EOF
#define AUTOCONF 1
EOF


echo $ac_n "checking if we can do hard links""... $ac_c" 1>&6
echo "configure:1650: checking if we can do hard links" >&5
ln configure src/link.tst 2>&5
if test -x src/link.tst; then
	CPLN="ln"
	rm -f src/link.tst
	echo "$ac_t""yes - using ln" 1>&6
else
	CPLN="cp"
	echo "$ac_t""no - using cp" 1>&6
fi



# Check whether --with-etc-dir or --without-etc-dir was given.
if test "${with_etc_dir+set}" = set; then
  withval="$with_etc_dir"
  ETCDIR=$with_etc_dir
else
  ETCDIR=/etc
fi



# Check whether --with-pid-dir or --without-pid-dir was given.
if test "${with_pid_dir+set}" = set; then
  withval="$with_pid_dir"
  PIDDIR=$with_pid_dir
else
  PIDDIR=/var/run
fi



# Check whether --with-log-dir or --without-log-dir was given.
if test "${with_log_dir+set}" = set; then
  withval="$with_log_dir"
  LOGDIR=$with_log_dir
else
  LOGDIR=/var/log
fi



# Check whether --enable-upload or --disable-upload was given.
if test "${enable_upload+set}" = set; then
  enableval="$enable_upload"
   upload=$enableval 
else
   upload=yes 
fi


# Check whether --enable-overwrite or --disable-overwrite was given.
if test "${enable_overwrite+set}" = set; then
  enableval="$enable_overwrite"
   overwrite=$enableval 
else
   overwrite=yes 
fi


# Check whether --enable-hostxs or --disable-hostxs was given.
if test "${enable_hostxs+set}" = set; then
  enableval="$enable_hostxs"
   hostxs=$enableval 
else
   hostxs=yes 
fi


# Check whether --enable-logfailed or --disable-logfailed was given.
if test "${enable_logfailed+set}" = set; then
  enableval="$enable_logfailed"
   logfailed=$enableval 
else
   logfailed=yes 
fi


# Check whether --enable-logtoomany or --disable-logtoomany was given.
if test "${enable_logtoomany+set}" = set; then
  enableval="$enable_logtoomany"
   logtoomany=$enableval 
else
   logtoomany=yes 
fi


# Check whether --enable-private or --disable-private was given.
if test "${enable_private+set}" = set; then
  enableval="$enable_private"
   private=$enableval 
else
   private=yes 
fi


# Check whether --enable-dnsretry or --disable-dnsretry was given.
if test "${enable_dnsretry+set}" = set; then
  enableval="$enable_dnsretry"
   dnsretry=$enableval 
else
   dnsretry=yes 
fi


# Check whether --enable-anononly or --disable-anononly was given.
if test "${enable_anononly+set}" = set; then
  enableval="$enable_anononly"
   anononly=$enableval 
else
   anononly=no 
fi


# Check whether --enable-paranoid or --disable-paranoid was given.
if test "${enable_paranoid+set}" = set; then
  enableval="$enable_paranoid"
   paranoid=$enableval 
else
   paranoid=no 
fi


# Check whether --enable-quota or --disable-quota was given.
if test "${enable_quota+set}" = set; then
  enableval="$enable_quota"
   quota=$enableval 
else
   quota=no 
fi


# Check whether --enable-pam or --disable-pam was given.
if test "${enable_pam+set}" = set; then
  enableval="$enable_pam"
   pam=$enableval 
else
   pam=no 
fi


# Check whether --enable-skey or --disable-skey was given.
if test "${enable_skey+set}" = set; then
  enableval="$enable_skey"
   skey=$enableval 
else
   skey=no 
fi


# Check whether --enable-opie or --disable-opie was given.
if test "${enable_opie+set}" = set; then
  enableval="$enable_opie"
   opie=$enableval 
else
   opie=no 
fi


if test $skey = "yes" -o $skey = "y"
then
  if test $opie = "yes" -o $skey = "y"
  then
    { echo "configure: error: *** YOU SHOULD NOT HAVE BOTH SKEY AND OPIE DEFINED!!!!!" 1>&2; exit 1; }
  fi
fi

# Check whether --enable-new-cd or --disable-new-cd was given.
if test "${enable_new_cd+set}" = set; then
  enableval="$enable_new_cd"
   newcd=$enableval 
else
   newcd=yes 
fi

# Check whether --enable-chmod or --disable-chmod was given.
if test "${enable_chmod+set}" = set; then
  enableval="$enable_chmod"
   chmod=$enableval 
else
   chmod=no 
fi

# Check whether --enable-rfc931 or --disable-rfc931 was given.
if test "${enable_rfc931+set}" = set; then
  enableval="$enable_rfc931"
   rfc931=$enableval 
else
   rfc931=no 
fi

# Check whether --enable-ratios or --disable-ratios was given.
if test "${enable_ratios+set}" = set; then
  enableval="$enable_ratios"
   ratio=$enableval 
else
   ratio=no 
fi

# Check whether --enable-passwd or --disable-passwd was given.
if test "${enable_passwd+set}" = set; then
  enableval="$enable_passwd"
   passwd=$enableval 
else
   passwd=no 
fi

# Check whether --enable-daemon or --disable-daemon was given.
if test "${enable_daemon+set}" = set; then
  enableval="$enable_daemon"
   daemon=$enableval 
else
   daemon=yes 
fi

# Check whether --enable-map-chdir or --disable-map-chdir was given.
if test "${enable_map_chdir+set}" = set; then
  enableval="$enable_map_chdir"
   mapchdir=$enableval 
else
   mapchdir=yes 
fi

# Check whether --enable-throughput or --disable-throughput was given.
if test "${enable_throughput+set}" = set; then
  enableval="$enable_throughput"
   throughput=$enableval 
else
   throughput=yes 
fi

# Check whether --enable-count or --disable-count was given.
if test "${enable_count+set}" = set; then
  enableval="$enable_count"
   count=$enableval 
else
   count=yes 
fi

# Check whether --enable-newlines or --disable-newlines was given.
if test "${enable_newlines+set}" = set; then
  enableval="$enable_newlines"
   newlines=$enableval 
else
   newlines=yes 
fi

# Check whether --enable-crackers or --disable-crackers was given.
if test "${enable_crackers+set}" = set; then
  enableval="$enable_crackers"
   crackers=$enableval 
else
   crackers=no 
fi

# Check whether --enable-verbose or --disable-verbose was given.
if test "${enable_verbose+set}" = set; then
  enableval="$enable_verbose"
   verbose=$enableval 
else
   verbose=yes 
fi

# Check whether --enable-noop or --disable-noop was given.
if test "${enable_noop+set}" = set; then
  enableval="$enable_noop"
   noop=$enableval 
else
   noop=no 
fi

# Check whether --enable-log-rp or --disable-log-rp was given.
if test "${enable_log_rp+set}" = set; then
  enableval="$enable_log_rp"
   logrp=$enableval 
else
   logrp=yes 
fi

# Check whether --enable-virtual or --disable-virtual was given.
if test "${enable_virtual+set}" = set; then
  enableval="$enable_virtual"
   virtual=$enableval 
else
   virtual=yes 
fi

# Check whether --enable-closedvirt or --disable-closedvirt was given.
if test "${enable_closedvirt+set}" = set; then
  enableval="$enable_closedvirt"
   closedvirt=$enableval 
else
   closedvirt=yes 
fi

# Check whether --enable-dns or --disable-dns was given.
if test "${enable_dns+set}" = set; then
  enableval="$enable_dns"
   dns=$enableval 
else
   dns=yes 
fi

# Check whether --enable-port or --disable-port was given.
if test "${enable_port+set}" = set; then
  enableval="$enable_port"
   port=$enableval 
else
   port=yes 
fi

# Check whether --enable-pasv or --disable-pasv was given.
if test "${enable_pasv+set}" = set; then
  enableval="$enable_pasv"
   pasv=$enableval 
else
   pasv=yes 
fi

# Check whether --enable-plsm or --disable-plsm was given.
if test "${enable_plsm+set}" = set; then
  enableval="$enable_plsm"
   plsm=$enableval 
else
   plsm=yes 
fi

# Check whether --enable-pasvip or --disable-pasvip was given.
if test "${enable_pasvip+set}" = set; then
  enableval="$enable_pasvip"
   pasvip=$enableval 
else
   pasvip=yes 
fi

# Check whether --enable-anonymous or --disable-anonymous was given.
if test "${enable_anonymous+set}" = set; then
  enableval="$enable_anonymous"
   anonymous=$enableval 
else
   anonymous=yes 
fi

# Check whether --enable-ls or --disable-ls was given.
if test "${enable_ls+set}" = set; then
  enableval="$enable_ls"
   ls=$enableval 
else
   ls=no 
fi

# Check whether --enable-numericuid or --disable-numericuid was given.
if test "${enable_numericuid+set}" = set; then
  enableval="$enable_numericuid"
   numericuid=$enableval 
else
   numericuid=yes 
fi

# Check whether --enable-hidesetuid or --disable-hidesetuid was given.
if test "${enable_hidesetuid+set}" = set; then
  enableval="$enable_hidesetuid"
   hidesetuid=$enableval 
else
   hidesetuid=yes 
fi

# Check whether --enable-mail or --disable-mail was given.
if test "${enable_mail+set}" = set; then
  enableval="$enable_mail"
   mail=$enableval 
else
   mail=yes 
fi

# Check whether --enable-badclients or --disable-badclients was given.
if test "${enable_badclients+set}" = set; then
  enableval="$enable_badclients"
   badclients=$enableval 
else
   badclients=no 
fi

# Check whether --with-bufsize or --without-bufsize was given.
if test "${with_bufsize+set}" = set; then
  withval="$with_bufsize"
   bufsize=$withval 
else
   bufsize=no 
fi

# Check whether --with-backlog or --without-backlog was given.
if test "${with_backlog+set}" = set; then
  withval="$with_backlog"
   backlog=$withval 
else
   backlog=100 
fi


LIBS=""
INCLUDE_GLOBUS_MAKEFILE_HEADER=""



echo $ac_n "checking for type of gssapi support""... $ac_c" 1>&6
echo "configure:2057: checking for type of gssapi support" >&5

# Check whether --enable-gssapi or --disable-gssapi was given.
if test "${enable_gssapi+set}" = set; then
  enableval="$enable_gssapi"
  gssapi_type=$enableval
else
  gssapi_type="globus"
fi


# Check whether --enable-authorization or --disable-authorization was given.
if test "${enable_authorization+set}" = set; then
  enableval="$enable_authorization"
  authorization_type=$enableval
else
  authorization_type="krb5"
fi


GPT_LINKTYPE=shared
# Check whether --enable-static-only or --disable-static-only was given.
if test "${enable_static_only+set}" = set; then
  enableval="$enable_static_only"
  
	      case $enableval in
	        no)
		  GPT_LINKTYPE="shared"
		  ;;
		yes)
		  GPT_LINKTYPE="static"
		  ;;
		*)
		  { echo "configure: error: --enable-static-only has no arguments" 1>&2; exit 1; }
		  ;;
	      esac
	      
fi


# Check whether --with-globus-paths or --without-globus-paths was given.
if test "${with_globus_paths+set}" = set; then
  withval="$with_globus_paths"
  globus_paths=$withval
else
  globus_paths="no"
fi


if test "X$globus_paths" = "Xyes"; then
    cat >> confdefs.h <<\EOF
#define USE_GLOBUS_PATHS 1
EOF

fi

# Check whether --with-flavor or --without-flavor was given.
if test "${with_flavor+set}" = set; then
  withval="$with_flavor"
  globus_flavor=$withval
fi

# Check whether --with-krb5-dir or --without-krb5-dir was given.
if test "${with_krb5_dir+set}" = set; then
  withval="$with_krb5_dir"
  krb5_dir=$withval
else
  if test -z "$krb5_dir"; then
	krb5_dir="no"
fi
fi


# Check whether --with-globus-dir or --without-globus-dir was given.
if test "${with_globus_dir+set}" = set; then
  withval="$with_globus_dir"
  globus_dir=$withval
else
  globus_dir="none"

fi



case $gssapi_type in
  no|none)	# No support
		echo "$ac_t""none" 1>&6
		;;
  krb5) # Kerberos 5 support
		echo "$ac_t""Kerberos 5" 1>&6
		gssapi_type="krb5"
		;;
  gsi|globus) # Globus SSLeasy
		echo "$ac_t""Globus/GSI SSLeay" 1>&6
		# Make sure it is "globus" and not "gsi"
		gssapi_type="globus"
		authorization_type="gridmap"
		;;
  *)	# Unrecognized type
		gssapi_type="none"
		{ echo "configure: error: Unrecognized GSSAPI type $gssapi_type" 1>&2; exit 1; }
		;;
esac

if test "$gssapi_type" != "none" ; then
	# Do stuff here for any GSSAPI library
	cat >> confdefs.h <<\EOF
#define GSSAPI 1
EOF

fi

if test "$gssapi_type" = "globus" ; then
	# Globus GSSAPI configuration
	cat >> confdefs.h <<\EOF
#define GSSAPI_GLOBUS 1
EOF


	
	GLOBUS_FLAVOR_NAME=$globus_flavor

	if test -z "$GLOBUS_FLAVOR_NAME" -o "$GLOBUS_FLAVOR_NAME" = "no"; then
            { echo "configure: error: must specify globus flavor" 1>&2; exit 1; }
	fi

    if test -z "$globus_cv_development_path"; then

	echo $ac_n "checking for Globus/GSI installation directory""... $ac_c" 1>&6
echo "configure:2186: checking for Globus/GSI installation directory" >&5

	if test x"$globus_dir" = x"none" \
	     -o x"$globus_dir" = x""; then
	    if test -n "$GLOBUS_LOCATION" ; then
		    globus_dir=$GLOBUS_LOCATION
	    elif test -n "$GLOBUS_INSTALL_PATH" ; then
		    globus_dir=$GLOBUS_INSTALL_PATH
	    elif test -d /usr/local/globus ; then
		    globus_dir="/usr/local/globus"
	    elif test -d /usr/local/gsi ; then
		    globus_dir="/usr/local/gsi"
	    else
		    { echo "configure: error: Cannot find Globus/GSI installation directory" 1>&2; exit 1; }
	    fi	
	fi
	echo "$ac_t""$globus_dir" 1>&6

	GLOBUS_LOCATION=$globus_dir
	echo $ac_n "checking for Globus packaging tools""... $ac_c" 1>&6
echo "configure:2206: checking for Globus packaging tools" >&5
	if test -d ${GLOBUS_LOCATION}/etc/globus_packages; then
	    echo "$ac_t""ok" 1>&6
	    if test -z "$GPT_LOCATION" ; then
		GPT_LOCATION=$GLOBUS_LOCATION
	    fi
	elif test -n "${GPT_LOCATION}" -a -d "${GPT_LOCATION}"; then
	    echo "$ac_t""ok" 1>&6
	else
	    { echo "configure: error: missing" 1>&2; exit 1; }
	fi
        GLOBUS_LIBTOOL=${GLOBUS_LOCATION}/sbin/libtool-${GLOBUS_FLAVOR_NAME}
	globus_cv_development_path=${GLOBUS_LOCATION}
    fi

	echo $ac_n "checking Globus GSSAPI dependencies""... $ac_c" 1>&6
echo "configure:2222: checking Globus GSSAPI dependencies" >&5

	if test -z "$GPT_LOCATION" ; then
	    GPT_LOCATION=$GLOBUS_LOCATION
	fi
	${GPT_LOCATION}/sbin/gpt_build_config -src=pkg_data_src.gssapi \
	                 -flavor=${globus_flavor} \
			 -link $GPT_LINKTYPE > /dev/null
	if test "$?" = "0"; then
	    echo "$ac_t""ok" 1>&6
	else
	    { echo "configure: error: failed" 1>&2; exit 1; }
	fi
	. ./gpt_build_temp.sh
	rm ./gpt_build_temp.sh

	inc="${GLOBUS_LOCATION}/include"
	GSSAPI_CFLAGS="-I${inc} -I${inc}/${globus_flavor} ${GPT_CONFIG_CFLAGS}"
	GSSAPI_LDFLAGS="-L${GLOBUS_LOCATION}/lib"
	GSSAPI_LIBS="${GPT_CONFIG_PGM_LINKS} ${GPT_CONFIG_LIBS}"
    
       # End Globus/GSI section
elif test "$gssapi_type" = "krb5" ; then

	# Kerberos 5 GSSAPI configuration
	cat >> confdefs.h <<\EOF
#define GSSAPI_KRB5 1
EOF


	# Find Kerberos 5 installation directory
	echo $ac_n "checking for Krb5 installation directory""... $ac_c" 1>&6
echo "configure:2254: checking for Krb5 installation directory" >&5

	krb5_install_dir=$krb5_dir

	if test "$krb5_install_dir" = "none" ; then
		if test -d /usr/local/krb5 ; then
			krb5_install_dir="/usr/local/krb5"
		elif test -d /krb5 ; then
			krb5_install_dir="/krb5"
		else
			{ echo "configure: error: Cannot find Kerberos 5 installation directory" 1>&2; exit 1; }
		fi	
	fi
	echo "$ac_t""$krb5_install_dir" 1>&6

	GSSAPI_LDFLAGS="-L${krb5_install_dir}/lib"

	# In v1.1 of the MIT release libcrypto was renamed to libk5crypto
  # so check from libcrypto and use it if found, otherwise assume
  # libk5crypto
	save_LDFLAGS=${LDFLAGS}
	LDFLAGS=${GSSAPI_LDFLAGS}
	echo $ac_n "checking for mit_des_string_to_key in -lcrypto""... $ac_c" 1>&6
echo "configure:2277: checking for mit_des_string_to_key in -lcrypto" >&5
ac_lib_var=`echo crypto'_'mit_des_string_to_key | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcrypto  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2285 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char mit_des_string_to_key();

int main() {
mit_des_string_to_key()
; return 0; }
EOF
if { (eval echo configure:2296: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  krb5_crypto_lib=crypto
else
  echo "$ac_t""no" 1>&6
krb5_crypto_lib=k5crypto
fi

	LDFLAGS=${save_LDFLAGS}

	GSSAPI_LIBS="-lgssapi_krb5 -lkrb5 -l${krb5_crypto_lib} -lcom_err"

	# For <krb5.h>
	GSSAPI_CFLAGS="-I${krb5_install_dir}/include $GSSAPI_CFLAGS"
	# For <gssapi.h>
	GSSAPI_CFLAGS="-I${krb5_install_dir}/include/gssapi $GSSAPI_CFLAGS"
	
	if test "$authorization_type" = "gridmap" ; then 
	    
	GLOBUS_FLAVOR_NAME=$globus_flavor

	if test -z "$GLOBUS_FLAVOR_NAME" -o "$GLOBUS_FLAVOR_NAME" = "no"; then
            { echo "configure: error: must specify globus flavor" 1>&2; exit 1; }
	fi

    if test -z "$globus_cv_development_path"; then

	echo $ac_n "checking for Globus/GSI installation directory""... $ac_c" 1>&6
echo "configure:2337: checking for Globus/GSI installation directory" >&5

	if test x"$globus_dir" = x"none" \
	     -o x"$globus_dir" = x""; then
	    if test -n "$GLOBUS_LOCATION" ; then
		    globus_dir=$GLOBUS_LOCATION
	    elif test -n "$GLOBUS_INSTALL_PATH" ; then
		    globus_dir=$GLOBUS_INSTALL_PATH
	    elif test -d /usr/local/globus ; then
		    globus_dir="/usr/local/globus"
	    elif test -d /usr/local/gsi ; then
		    globus_dir="/usr/local/gsi"
	    else
		    { echo "configure: error: Cannot find Globus/GSI installation directory" 1>&2; exit 1; }
	    fi	
	fi
	echo "$ac_t""$globus_dir" 1>&6

	GLOBUS_LOCATION=$globus_dir
	echo $ac_n "checking for Globus packaging tools""... $ac_c" 1>&6
echo "configure:2357: checking for Globus packaging tools" >&5
	if test -d ${GLOBUS_LOCATION}/etc/globus_packages; then
	    echo "$ac_t""ok" 1>&6
	    if test -z "$GPT_LOCATION" ; then
		GPT_LOCATION=$GLOBUS_LOCATION
	    fi
	elif test -n "${GPT_LOCATION}" -a -d "${GPT_LOCATION}"; then
	    echo "$ac_t""ok" 1>&6
	else
	    { echo "configure: error: missing" 1>&2; exit 1; }
	fi
        GLOBUS_LIBTOOL=${GLOBUS_LOCATION}/sbin/libtool-${GLOBUS_FLAVOR_NAME}
	globus_cv_development_path=${GLOBUS_LOCATION}
    fi

	    echo $ac_n "checking Globus gridmap dependencies""... $ac_c" 1>&6
echo "configure:2373: checking Globus gridmap dependencies" >&5

	    inc="${GLOBUS_LOCATION}/include"
	    GLOBUS_GRIDMAP_CFLAGS="-I${inc} -I${inc}/${globus_flavor} ${GPT_CONFIG_CFLAGS}"
	    GLOBUS_GRIDMAP_LDFLAGS="-L${GLOBUS_LOCATION}/lib ${GPT_CONFIG_LIBS}"
	    GLOBUS_GRIDMAP_LIBS="-lglobus_gss_assist_${globus_flavor}"
    
            GSSAPI_CFLAGS="$GSSAPI_LIBS $GLOBUS_GRIDMAP_CFLAGS"
            GSSAPI_LDFLAGS="$GSSAPI_LIBS $GLOBUS_GRIDMAP_LDFLAGS"
            GSSAPI_LIBS="$GSSAPI_LIBS $GLOBUS_GRIDMAP_LIBS"

	    cat >> confdefs.h <<\EOF
#define GRIDMAP_WITH_KRB5 1
EOF

	# End Kerberos 5 Section
	fi
    fi





if test "$gssapi_type" != "none" ; then
      ORIG_LIBS="$LIBS"
  ORIG_LDFLAGS="$LDFLAGS"
  LDFLAGS="$LDFLAGS $GSSAPI_LDFLAGS"
  LIBS="$LIBS $GSSAPI_LIBS"

  echo $ac_n "checking for gss_seal""... $ac_c" 1>&6
echo "configure:2403: checking for gss_seal" >&5
  cat > conftest.$ac_ext <<EOF
#line 2405 "configure"
#include "confdefs.h"

int main() {
gss_seal();
; return 0; }
EOF
if { (eval echo configure:2412: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  echo "$ac_t""yes" 1>&6
       cat >> confdefs.h <<\EOF
#define HAVE_GSS_SEAL 1
EOF

else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  echo "$ac_t""no" 1>&6
fi
rm -f conftest*

  echo $ac_n "checking for gss_unseal""... $ac_c" 1>&6
echo "configure:2428: checking for gss_unseal" >&5
  cat > conftest.$ac_ext <<EOF
#line 2430 "configure"
#include "confdefs.h"

int main() {
gss_unseal();
; return 0; }
EOF
if { (eval echo configure:2437: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  echo "$ac_t""yes" 1>&6
       cat >> confdefs.h <<\EOF
#define HAVE_GSS_UNSEAL 1
EOF

else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  echo "$ac_t""no" 1>&6
fi
rm -f conftest*

  echo $ac_n "checking for gss_export_name""... $ac_c" 1>&6
echo "configure:2453: checking for gss_export_name" >&5
  cat > conftest.$ac_ext <<EOF
#line 2455 "configure"
#include "confdefs.h"

int main() {
gss_export_name();
; return 0; }
EOF
if { (eval echo configure:2462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  echo "$ac_t""yes" 1>&6
       cat >> confdefs.h <<\EOF
#define HAVE_GSS_EXPORT_NAME 1
EOF

else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  echo "$ac_t""no" 1>&6
fi
rm -f conftest*

  LIBS="$ORIG_LIBS"
  LDFLAGS="$ORIG_LDFLAGS"
fi

   

if test "$gssapi_type" = "globus"; then
	echo $ac_n "checking Globus Authorization usage""... $ac_c" 1>&6
echo "configure:2485: checking Globus Authorization usage" >&5
	# Check whether --with-globus-authorization or --without-globus-authorization was given.
if test "${with_globus_authorization+set}" = set; then
  withval="$with_globus_authorization"
   globus_authorization=$withval 
else
   globus_authorization="no"
fi

	echo "$ac_t""$globus_authorization" 1>&6
fi

if test "$globus_authorization" = "yes"; then
	cat >> confdefs.h <<\EOF
#define GLOBUS_AUTHORIZATION 1
EOF


	echo $ac_n "checking Globus Globus Authorization dependencies""... $ac_c" 1>&6
echo "configure:2504: checking Globus Globus Authorization dependencies" >&5

	if test -z "$GPT_LOCATION" ; then
	    GPT_LOCATION=$GLOBUS_LOCATION
	fi

	${GPT_LOCATION}/sbin/gpt_build_config -src=pkg_data_src.globus_auth \
	                 -flavor=${globus_flavor} \
			 -link $GPT_LINKTYPE > /dev/null
	if test "$?" = "0"; then
	    echo "$ac_t""ok" 1>&6
	else
	    { echo "configure: error: failed" 1>&2; exit 1; }
	fi
	. ./gpt_build_temp.sh
	rm ./gpt_build_temp.sh

	inc="${GLOBUS_LOCATION}/include"
	GSSAPI_CFLAGS="-I${inc} -I${inc}/${globus_flavor} ${GPT_CONFIG_CFLAGS}"
	GSSAPI_LDFLAGS="-L${GLOBUS_LOCATION}/lib"
	GSSAPI_LIBS="${GPT_CONFIG_PGM_LINKS} ${GPT_CONFIG_LIBS}"
    
       # End Globus/GSI section
fi	
	





# Check whether --enable-globus-data or --disable-globus-data was given.
if test "${enable_globus_data+set}" = set; then
  enableval="$enable_globus_data"
   globus_data=$enableval 
else
   globus_data=yes 
fi


    if test $globus_data = yes; then
	cat >> confdefs.h <<\EOF
#define USE_GLOBUS_DATA_CODE 1
EOF

	
	GLOBUS_FLAVOR_NAME=$globus_flavor

	if test -z "$GLOBUS_FLAVOR_NAME" -o "$GLOBUS_FLAVOR_NAME" = "no"; then
            { echo "configure: error: must specify globus flavor" 1>&2; exit 1; }
	fi

    if test -z "$globus_cv_development_path"; then

	echo $ac_n "checking for Globus/GSI installation directory""... $ac_c" 1>&6
echo "configure:2558: checking for Globus/GSI installation directory" >&5

	if test x"$globus_dir" = x"none" \
	     -o x"$globus_dir" = x""; then
	    if test -n "$GLOBUS_LOCATION" ; then
		    globus_dir=$GLOBUS_LOCATION
	    elif test -n "$GLOBUS_INSTALL_PATH" ; then
		    globus_dir=$GLOBUS_INSTALL_PATH
	    elif test -d /usr/local/globus ; then
		    globus_dir="/usr/local/globus"
	    elif test -d /usr/local/gsi ; then
		    globus_dir="/usr/local/gsi"
	    else
		    { echo "configure: error: Cannot find Globus/GSI installation directory" 1>&2; exit 1; }
	    fi	
	fi
	echo "$ac_t""$globus_dir" 1>&6

	GLOBUS_LOCATION=$globus_dir
	echo $ac_n "checking for Globus packaging tools""... $ac_c" 1>&6
echo "configure:2578: checking for Globus packaging tools" >&5
	if test -d ${GLOBUS_LOCATION}/etc/globus_packages; then
	    echo "$ac_t""ok" 1>&6
	    if test -z "$GPT_LOCATION" ; then
		GPT_LOCATION=$GLOBUS_LOCATION
	    fi
	elif test -n "${GPT_LOCATION}" -a -d "${GPT_LOCATION}"; then
	    echo "$ac_t""ok" 1>&6
	else
	    { echo "configure: error: missing" 1>&2; exit 1; }
	fi
        GLOBUS_LIBTOOL=${GLOBUS_LOCATION}/sbin/libtool-${GLOBUS_FLAVOR_NAME}
	globus_cv_development_path=${GLOBUS_LOCATION}
    fi

	echo $ac_n "checking Globus data dependencies""... $ac_c" 1>&6
echo "configure:2594: checking Globus data dependencies" >&5

	${GPT_LOCATION}/sbin/gpt_build_config -src=pkg_data_src.gpt \
	                 -flavor=${globus_flavor} \
			 -link $GPT_LINKTYPE > /dev/null
	if test "$?" = "0"; then
	    echo "$ac_t""ok" 1>&6
	else
	    { echo "configure: error: failed" 1>&2; exit 1; }
	fi
	. ./gpt_build_temp.sh
	rm ./gpt_build_temp.sh

	inc="${GLOBUS_LOCATION}/include"
	GLOBUS_DATA_CFLAGS="-I${inc} -I${inc}/${globus_flavor} ${GPT_CONFIG_CFLAGS}"
	GLOBUS_DATA_LDFLAGS=" -L${GLOBUS_LOCATION}/lib ${GPT_CONFIG_LIBS}"
	GLOBUS_DATA_LIBS="${GPT_CONFIG_PGM_LINKS}"
    
	
	
	
    fi


if test "$gssapi_type" != "none"; then
	cat >> confdefs.h <<\EOF
#define FTP_SECURITY_EXTENSIONS 1
EOF

	GSSAPI_SRC="gssapi.c radix.c secure_ext.c"
	for ac_func in setenv
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2627: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2632 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2655: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

	for ac_func in unsetenv
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2682: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2687 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2710: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

else
	GSSAPI_SRC=""
fi



echo $ac_n "checking whether to use Transarc AFS libraries""... $ac_c" 1>&6
echo "configure:2741: checking whether to use Transarc AFS libraries" >&5
# Check whether --with-afs or --without-afs was given.
if test "${with_afs+set}" = set; then
  withval="$with_afs"
  :
else
  with_afs=no
fi
echo "$ac_t""$with_afs" 1>&6
case "$with_afs" in
	no)	;;
	yes)	with_afs="/usr/afsws" ;;
	*)	;;
esac

if test $with_afs != no; then
	if test ! -d "$with_afs"; then
		{ echo "configure: error: Could not find AFS directory $with_afs" 1>&2; exit 1; }
	fi
	cat >> confdefs.h <<\EOF
#define AFS 1
EOF

	cat >> confdefs.h <<\EOF
#define HAVE_TRANSARC_AFS 1
EOF

	AFS_LDFLAGS="-L${with_afs}/lib -L${with_afs}/lib/afs"
	AFS_LIBS="-lauth -lsys -lrx -llwp"
	AFS_CFLAGS="-I${with_afs}/include"
											fi

echo $ac_n "checking whether to use libkrbafs""... $ac_c" 1>&6
echo "configure:2774: checking whether to use libkrbafs" >&5
# Check whether --with-krbafs or --without-krbafs was given.
if test "${with_krbafs+set}" = set; then
  withval="$with_krbafs"
  :
else
  with_krbafs=no
fi

echo "$ac_t""$with_krbafs" 1>&6
case "$with_krbafs" in
  no)   ;;
  *)
	if test ! -d "$with_krbafs"; then
		{ echo "configure: error: Could not find krbafs directory $with_krbafs" 1>&2; exit 1; }
	fi
	cat >> confdefs.h <<\EOF
#define AFS 1
EOF
	
	cat >> confdefs.h <<\EOF
#define HAVE_LIBKRBAFS 1
EOF

		with_afs="yes"
	AFS_LIBS="-lkrbafs"
	AFS_CFLAGS="-I${with_krbafs}/include"
	AFS_LIBS="-L${withval}/lib -lkrbafs"
   ;;
esac






if test "$with_afs" != "no"; then
	AFS_SRC="afs.c"

		
 echo $ac_n "checking for sigprocmask""... $ac_c" 1>&6
echo "configure:2815: checking for sigprocmask" >&5
if eval "test \"`echo '$''{'ac_cv_func_sigprocmask'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2820 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char sigprocmask(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char sigprocmask();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_sigprocmask) || defined (__stub___sigprocmask)
choke me
#else
sigprocmask();
#endif

; return 0; }
EOF
if { (eval echo configure:2843: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_sigprocmask=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_sigprocmask=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'sigprocmask`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  echo $ac_n "checking for sigset_t and POSIX_SIGNALS""... $ac_c" 1>&6
echo "configure:2858: checking for sigset_t and POSIX_SIGNALS" >&5
   cat > conftest.$ac_ext <<EOF
#line 2860 "configure"
#include "confdefs.h"
#include <signal.h>
int main() {
sigset_t x
; return 0; }
EOF
if { (eval echo configure:2867: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  type_sigset_t=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  type_sigset_t=no
fi
rm -f conftest*
   echo "$ac_t""$type_sigset_t" 1>&6
   if test $type_sigset_t = yes; then
    cat >> confdefs.h <<\EOF
#define POSIX_SIGNALS 1
EOF

   fi
  
 
else
  echo "$ac_t""no" 1>&6
fi


	
 echo $ac_n "checking for sigsetjmp""... $ac_c" 1>&6
echo "configure:2893: checking for sigsetjmp" >&5
if eval "test \"`echo '$''{'ac_cv_func_sigsetjmp'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2898 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char sigsetjmp(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char sigsetjmp();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_sigsetjmp) || defined (__stub___sigsetjmp)
choke me
#else
sigsetjmp();
#endif

; return 0; }
EOF
if { (eval echo configure:2921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_sigsetjmp=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_sigsetjmp=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'sigsetjmp`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  echo $ac_n "checking for sigjmp_buf""... $ac_c" 1>&6
echo "configure:2936: checking for sigjmp_buf" >&5
   cat > conftest.$ac_ext <<EOF
#line 2938 "configure"
#include "confdefs.h"
#include <setjmp.h>
int main() {
sigjmp_buf x
; return 0; }
EOF
if { (eval echo configure:2945: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  struct_sigjmp_buf=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  struct_sigjmp_buf=no
fi
rm -f conftest*
   echo "$ac_t""$struct_sigjmp_buf" 1>&6
   if test $struct_sigjmp_buf = yes; then
    cat >> confdefs.h <<\EOF
#define POSIX_SETJMP 1
EOF

   fi
  
 
else
  echo "$ac_t""no" 1>&6
fi


	echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
echo "configure:2970: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2975 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
#ifdef signal
#undef signal
#endif
#ifdef __cplusplus
extern "C" void (*signal (int, void (*)(int)))(int);
#else
void (*signal ()) ();
#endif

int main() {
int i;
; return 0; }
EOF
if { (eval echo configure:2992: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_type_signal=void
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_type_signal=int
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_type_signal" 1>&6
cat >> confdefs.h <<EOF
#define RETSIGTYPE $ac_cv_type_signal
EOF


else
	AFS_SRC=""
fi


echo $ac_n "checking for post authentication process""... $ac_c" 1>&6
echo "configure:3016: checking for post authentication process" >&5
# Check whether --with-post-auth-process or --without-post-auth-process was given.
if test "${with_post_auth_process+set}" = set; then
  withval="$with_post_auth_process"
  	echo "$ac_t""$withval" 1>&6
	cat >> confdefs.h <<EOF
#define POST_AUTH_PROCESS "${withval}"
EOF


else
  echo "$ac_t""no" 1>&6

fi


for ac_hdr in dirent.h regex.h shadow.h security/pam_appl.h opie.h skey.h \
  syslog.h sys/syslog.h fcntl.h mntent.h stdlib.h unistd.h glob.h grp.h \
  ndir.h sys/dir.h sys/ndir.h string.h vmsdir.h sys/systeminfo.h \
  bsd/bsd.h sys/param.h values.h limits.h sys/types.h sys/mntent.h \
  sys/mnttab.h paths.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3040: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3045 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3050: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_func in dirfd fchdir flock ftw getcwd getdtablesize pstat lstat \
  vprintf snprintf regexec regex fgetspent usercmp getusershell setuid vsnprintf \
  snprintf strcasestr strdup strerror strsep strstr syslog glob strcasecmp \
  strncasecmp sigprocmask quotactl getrlimit sysconf setsid memmove \
  strtoul vfork
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:3083: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3088 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:3111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_func in seteuid setreuid setresuid
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:3138: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3143 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:3166: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 break
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_func in setegid setregid setresgid
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:3193: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3198 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:3221: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 break
else
  echo "$ac_t""no" 1>&6
fi
done


echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
echo "configure:3247: checking for crypt in -lcrypt" >&5
ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcrypt  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3255 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char crypt();

int main() {
crypt()
; return 0; }
EOF
if { (eval echo configure:3266: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

if test $result = yes; then
	LIBS="$LIBS -lcrypt"
fi
USENSL=no
echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
echo "configure:3292: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsocket  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3300 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char socket();

int main() {
socket()
; return 0; }
EOF
if { (eval echo configure:3311: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

if test $result = yes; then
	LIBS="$LIBS -lsocket"
else
	echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
echo "configure:3336: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsocket -lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3344 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char socket();

int main() {
socket()
; return 0; }
EOF
if { (eval echo configure:3355: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

	if test $result = yes; then
		LIBS = "$LIBS -lsocket -lnsl"
		USENSL=yes
	else
		echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
echo "configure:3381: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsocket  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3389 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char connect();

int main() {
connect()
; return 0; }
EOF
if { (eval echo configure:3400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

		if test $result = yes; then
			LIBS="$LIBS -lsocket"
		else
			echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
echo "configure:3425: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsocket -lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3433 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char connect();

int main() {
connect()
; return 0; }
EOF
if { (eval echo configure:3444: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

			if test $result = yes; then
				LIBS="$LIBS -lsocket -lnsl"
				USENSL=yes
			fi
		fi
	fi
fi
if test $USENSL != yes; then
	echo $ac_n "checking for inet_addr in -lnsl""... $ac_c" 1>&6
echo "configure:3474: checking for inet_addr in -lnsl" >&5
ac_lib_var=`echo nsl'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lnsl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3482 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char inet_addr();

int main() {
inet_addr()
; return 0; }
EOF
if { (eval echo configure:3493: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

	if test $result = yes; then
		LIBS="$LIBS -lnsl"
	fi
fi

echo $ac_n "checking for sys_siglist""... $ac_c" 1>&6
echo "configure:3520: checking for sys_siglist" >&5
cat > conftest.$ac_ext <<EOF
#line 3522 "configure"
#include "confdefs.h"
#include <signal.h>
#include <stdio.h>
int main() {
 puts(sys_siglist[0]); 
; return 0; }
EOF
if { (eval echo configure:3530: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  result=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  result=no
fi
rm -f conftest*
echo "$ac_t""$result" 1>&6
if test "$result" = "yes"; then
	cat >> confdefs.h <<\EOF
#define HAVE_SIGLIST 1
EOF

fi

echo $ac_n "checking type of qsort""... $ac_c" 1>&6
echo "configure:3549: checking type of qsort" >&5
cat > conftest.$ac_ext <<EOF
#line 3551 "configure"
#include "confdefs.h"
#include <stdlib.h>
extern void qsort();
int main() {
  
; return 0; }
EOF
if { (eval echo configure:3559: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  result=void
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  result=int
fi
rm -f conftest*
echo "$ac_t""$result" 1>&6
if test "$result" = "void"; then
	cat >> confdefs.h <<\EOF
#define QSORT_IS_VOID 1
EOF

fi

echo $ac_n "checking how to determine bytesize""... $ac_c" 1>&6
echo "configure:3578: checking how to determine bytesize" >&5
if test "$ac_cv_header_bsd_bsd_h" = "yes"; then
	cat > conftest.$ac_ext <<EOF
#line 3581 "configure"
#include "confdefs.h"
 #include <bsd/bsd.h> 
int main() {
 int i=NBBY 
; return 0; }
EOF
if { (eval echo configure:3588: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  NBBY=NBBY
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  NBBY=8
fi
rm -f conftest*
else
	cat > conftest.$ac_ext <<EOF
#line 3600 "configure"
#include "confdefs.h"
 #include <sys/param.h> 
int main() {
 int i=NBBY 
; return 0; }
EOF
if { (eval echo configure:3607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  NBBY=NBBY
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  NBBY=8
fi
rm -f conftest*
fi
if test "$NBBY" = "8"; then
	cat > conftest.$ac_ext <<EOF
#line 3620 "configure"
#include "confdefs.h"
 #include <values.h> 
int main() {
 int i=BITSPERBYTE 
; return 0; }
EOF
if { (eval echo configure:3627: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  NBBY=BITSPERBYTE
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  NBBY=8
fi
rm -f conftest*
	if test "$NBBY" = "8"; then
		cat > conftest.$ac_ext <<EOF
#line 3639 "configure"
#include "confdefs.h"
 #include <limits.h> 
int main() {
 int i=CHAR_BIT 
; return 0; }
EOF
if { (eval echo configure:3646: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  NBBY=CHAR_BIT
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  NBBY=8
fi
rm -f conftest*
		if test "$NBBY" != "8"; then
			cat >> confdefs.h <<\EOF
#define NEED_LIMITS_H 1
EOF

		else
			cat > conftest.$ac_ext <<EOF
#line 3663 "configure"
#include "confdefs.h"
 #include <sys/types.h> 
int main() {
 int i=NBBY 
; return 0; }
EOF
if { (eval echo configure:3670: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  NBBY=NBBY
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  NBBY=8
fi
rm -f conftest*
		fi
	else
		cat >> confdefs.h <<\EOF
#define NEED_VALUES_H 1
EOF

	fi
else
	if test "$ac_cv_header_bsd_bsd_h" = "yes"; then
		cat >> confdefs.h <<\EOF
#define NEED_BSD_BSD_H 1
EOF

	else
		cat >> confdefs.h <<\EOF
#define NEED_SYS_PARAM_H 1
EOF

	fi
fi
if test "$NBBY" = "8"; then
	echo "$ac_t""can't be determined - assuming 8" 1>&6
else
	echo "$ac_t""$NBBY" 1>&6
fi
if test "$NBBY" != "NBBY"; then
	cat >> confdefs.h <<EOF
#define NBBY $NBBY
EOF

fi

echo $ac_n "checking if openlog requires 3 arguments""... $ac_c" 1>&6
echo "configure:3713: checking if openlog requires 3 arguments" >&5
cat > conftest.$ac_ext <<EOF
#line 3715 "configure"
#include "confdefs.h"
#ifdef HAVE_SYSLOG_H
#include <syslog.h>
#endif
#ifdef HAVE_SYS_SYSLOG_H
#include <sys/syslog.h>
#endif
int main() {
 openlog("",0,0) 
; return 0; }
EOF
if { (eval echo configure:3727: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  result=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  result=no
fi
rm -f conftest*
echo "$ac_t""$result" 1>&6
if test "$result" = "yes"; then
	echo $ac_n "checking which facility openlog understands""... $ac_c" 1>&6
echo "configure:3740: checking which facility openlog understands" >&5
	cat > conftest.$ac_ext <<EOF
#line 3742 "configure"
#include "confdefs.h"
#ifdef HAVE_SYSLOG_H
#include <syslog.h>
#endif
#ifdef HAVE_SYS_SYSLOG_H
#include <sys/syslog.h>
#endif
int main() {
 openlog("",0,LOG_FTP) 
; return 0; }
EOF
if { (eval echo configure:3754: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  result=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  result=no
fi
rm -f conftest*
	if test "$result" = "yes"; then
		FACILITY="LOG_FTP"
	else
		cat > conftest.$ac_ext <<EOF
#line 3768 "configure"
#include "confdefs.h"
#ifdef HAVE_SYSLOG_H
#include <syslog.h>
#endif
#ifdef HAVE_SYS_SYSLOG_H
#include <sys/syslog.h>
#endif
int main() {
 openlog("",0,LOG_DAEMON) 
; return 0; }
EOF
if { (eval echo configure:3780: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  result=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  result=no
fi
rm -f conftest*
		if test "$result" = "yes"; then
			FACILITY="LOG_DAEMON"
		else
			cat > conftest.$ac_ext <<EOF
#line 3794 "configure"
#include "confdefs.h"
#ifdef HAVE_SYSLOG_H
#include <syslog.h>
#endif
#ifdef HAVE_SYS_SYSLOG_H
#include <sys/syslog.h>
#endif
int main() {
 openlog("",0,LOG_LOCAL7)
; return 0; }
EOF
if { (eval echo configure:3806: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  result=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  result=no
fi
rm -f conftest*
			if test "$result" = "yes"; then
				FACILITY="LOG_LOCAL7"
			fi
		fi
	fi
	echo "$ac_t""$FACILITY" 1>&6
	cat >> confdefs.h <<EOF
#define FACILITY $FACILITY
EOF

fi

echo $ac_n "checking type of getmntent function""... $ac_c" 1>&6
echo "configure:3829: checking type of getmntent function" >&5
cat > conftest.$ac_ext <<EOF
#line 3831 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <unistd.h>
#ifdef HAVE_MNTENT_H
#include <mntent.h>
#endif
#ifdef HAVE_SYS_MNTENT_H
#include <sys/mntent.h>
#endif
#ifdef HAVE_SYS_MNTTAB_H
#include <sys/mnttab.h>
#endif
#include <unistd.h>
int main() {
 (void) getmntent(0) 
; return 0; }
EOF
if { (eval echo configure:3849: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  result=new-style
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  result=old-style
fi
rm -f conftest*
echo "$ac_t""$result" 1>&6
if test "$result" = "old-style"; then
	cat >> confdefs.h <<\EOF
#define HAS_OLDSTYLE_GETMNTENT 1
EOF

fi

echo $ac_n "checking if there is a ut_host field in the utmp structure""... $ac_c" 1>&6
echo "configure:3868: checking if there is a ut_host field in the utmp structure" >&5
cat > conftest.$ac_ext <<EOF
#line 3870 "configure"
#include "confdefs.h"

#ifdef TIME_WITH_SYS_TIME
#include <sys/time.h>
#include <time.h>
#else
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#else
#include <time.h>
#endif
#endif
#include <utmp.h>
int main() {
struct utmp ut; puts(ut.ut_host);
; return 0; }
EOF
if { (eval echo configure:3888: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  result=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  result=no
fi
rm -f conftest*
if test "$result" = "yes"; then
  cat >> confdefs.h <<\EOF
#define HAVE_UT_UT_HOST 1
EOF

fi
echo "$ac_t""$result" 1>&6

echo $ac_n "checking if there is a ut_exit.e_termination field in the utmp structure""... $ac_c" 1>&6
echo "configure:3907: checking if there is a ut_exit.e_termination field in the utmp structure" >&5
cat > conftest.$ac_ext <<EOF
#line 3909 "configure"
#include "confdefs.h"
#ifdef TIME_WITH_SYS_TIME
#include <sys/time.h>
#include <time.h>
#else
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#else
#include <time.h>
#endif
#endif
#include <utmp.h>
int main() {
struct utmp ut; ut.ut_exit.e_termination=0;
; return 0; }
EOF
if { (eval echo configure:3926: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  result=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  result=no
fi
rm -f conftest*
if test "$result" = "yes"; then
	cat >> confdefs.h <<\EOF
#define HAVE_UT_UT_EXIT_E_TERMINATION 1
EOF

fi
echo "$ac_t""$result" 1>&6

echo $ac_n "checking if there is a pw_expire field in the pw structure""... $ac_c" 1>&6
echo "configure:3945: checking if there is a pw_expire field in the pw structure" >&5
cat > conftest.$ac_ext <<EOF
#line 3947 "configure"
#include "confdefs.h"
#include <pwd.h>
int main() {
 struct passwd *p; void *a=(void *)p->pw_expire; 
; return 0; }
EOF
if { (eval echo configure:3954: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  result=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  result=no
fi
rm -f conftest*
if test "$result" = "yes"; then
  cat >> confdefs.h <<\EOF
#define HAS_PW_EXPIRE 1
EOF

fi
echo "$ac_t""$result" 1>&6

echo $ac_n "checking if there is a st_blksize field in the stat structure""... $ac_c" 1>&6
echo "configure:3973: checking if there is a st_blksize field in the stat structure" >&5
cat > conftest.$ac_ext <<EOF
#line 3975 "configure"
#include "confdefs.h"
#include <sys/stat.h>
int main() {
 struct stat *s; int a=(int)s->st_blksize; 
; return 0; }
EOF
if { (eval echo configure:3982: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  result=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  result=no
fi
rm -f conftest*
if test "$result" = "yes"; then
  cat >> confdefs.h <<\EOF
#define HAVE_ST_BLKSIZE 1
EOF

fi
echo "$ac_t""$result" 1>&6

echo $ac_n "checking for res_query""... $ac_c" 1>&6
echo "configure:4001: checking for res_query" >&5
if eval "test \"`echo '$''{'ac_cv_func_res_query'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4006 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char res_query(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char res_query();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_res_query) || defined (__stub___res_query)
choke me
#else
res_query();
#endif

; return 0; }
EOF
if { (eval echo configure:4029: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_res_query=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_res_query=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'res_query`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

if test "$result" = "yes"; then
	cat >> confdefs.h <<\EOF
#define HAVE_LIBRESOLV 1
EOF

else
	echo $ac_n "checking for res_query in -lbind""... $ac_c" 1>&6
echo "configure:4056: checking for res_query in -lbind" >&5
ac_lib_var=`echo bind'_'res_query | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lbind  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4064 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char res_query();

int main() {
res_query()
; return 0; }
EOF
if { (eval echo configure:4075: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

	if test "$result" = "yes"; then
		cat >> confdefs.h <<\EOF
#define HAVE_LIBRESOLV 1
EOF

               	LIBS="$LIBS -lbind"
	else
		echo $ac_n "checking for res_query in -lresolv""... $ac_c" 1>&6
echo "configure:4104: checking for res_query in -lresolv" >&5
ac_lib_var=`echo resolv'_'res_query | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lresolv  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4112 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char res_query();

int main() {
res_query()
; return 0; }
EOF
if { (eval echo configure:4123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

	        if test "$result" = "yes"; then
			cat >> confdefs.h <<\EOF
#define HAVE_LIBRESOLV 1
EOF

                	LIBS="$LIBS -lresolv"
	        fi
	fi
fi

if test $host != $build; then
  ac_tool_prefix=${host_alias}-
else
  ac_tool_prefix=
fi


   # Check whether --enable-largefile or --disable-largefile was given.
if test "${enable_largefile+set}" = set; then
  enableval="$enable_largefile"
  :
fi

   if test "$enable_largefile" != no; then
     # Extract the first word of "${ac_tool_prefix}getconf", so it can be a program name with args.
set dummy ${ac_tool_prefix}getconf; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4171: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GETCONF'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$GETCONF"; then
  ac_cv_prog_GETCONF="$GETCONF" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_GETCONF="${ac_tool_prefix}getconf"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_GETCONF" && ac_cv_prog_GETCONF="getconf"
fi
fi
GETCONF="$ac_cv_prog_GETCONF"
if test -n "$GETCONF"; then
  echo "$ac_t""$GETCONF" 1>&6
else
  echo "$ac_t""no" 1>&6
fi



     echo $ac_n "checking for CFLAGS value to request large file support""... $ac_c" 1>&6
echo "configure:4201: checking for CFLAGS value to request large file support" >&5
if eval "test \"`echo '$''{'ac_cv_sys_largefile_CFLAGS'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_cv_sys_largefile_CFLAGS=`($GETCONF LFS_CFLAGS) 2>/dev/null` || {
	ac_cv_sys_largefile_CFLAGS=no
      }
fi

echo "$ac_t""$ac_cv_sys_largefile_CFLAGS" 1>&6
     echo $ac_n "checking for LDFLAGS value to request large file support""... $ac_c" 1>&6
echo "configure:4212: checking for LDFLAGS value to request large file support" >&5
if eval "test \"`echo '$''{'ac_cv_sys_largefile_LDFLAGS'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_cv_sys_largefile_LDFLAGS=`($GETCONF LFS_LDFLAGS) 2>/dev/null` || {
	ac_cv_sys_largefile_LDFLAGS=no
      }
fi

echo "$ac_t""$ac_cv_sys_largefile_LDFLAGS" 1>&6
     echo $ac_n "checking for LIBS value to request large file support""... $ac_c" 1>&6
echo "configure:4223: checking for LIBS value to request large file support" >&5
if eval "test \"`echo '$''{'ac_cv_sys_largefile_LIBS'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_cv_sys_largefile_LIBS=`($GETCONF LFS_LIBS) 2>/dev/null` || {
	ac_cv_sys_largefile_LIBS=no
      }
fi

echo "$ac_t""$ac_cv_sys_largefile_LIBS" 1>&6
	
     for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
       case "$ac_flag" in
       no) ;;
       -D_FILE_OFFSET_BITS=*) ;;
       -D_LARGEFILE_SOURCE | -D_LARGEFILE_SOURCE=*) ;;
       -D_LARGE_FILES | -D_LARGE_FILES=*) ;;
       -D?* | -I?*)
	 case "$ac_flag" in
   no) ;;
   ?*)
     case "$CPPFLAGS" in
     '') CPPFLAGS="$ac_flag" ;;
     *) CPPFLAGS=$CPPFLAGS' '"$ac_flag" ;;
     esac ;;
   esac ;;
       *)
	 case "$ac_flag" in
   no) ;;
   ?*)
     case "$CFLAGS" in
     '') CFLAGS="$ac_flag" ;;
     *) CFLAGS=$CFLAGS' '"$ac_flag" ;;
     esac ;;
   esac ;;
       esac
     done
     case "$ac_cv_sys_largefile_LDFLAGS" in
   no) ;;
   ?*)
     case "$LDFLAGS" in
     '') LDFLAGS="$ac_cv_sys_largefile_LDFLAGS" ;;
     *) LDFLAGS=$LDFLAGS' '"$ac_cv_sys_largefile_LDFLAGS" ;;
     esac ;;
   esac
     case "$ac_cv_sys_largefile_LIBS" in
   no) ;;
   ?*)
     case "$LIBS" in
     '') LIBS="$ac_cv_sys_largefile_LIBS" ;;
     *) LIBS=$LIBS' '"$ac_cv_sys_largefile_LIBS" ;;
     esac ;;
   esac
     echo $ac_n "checking for _FILE_OFFSET_BITS""... $ac_c" 1>&6
echo "configure:4277: checking for _FILE_OFFSET_BITS" >&5
if eval "test \"`echo '$''{'ac_cv_sys_file_offset_bits'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_cv_sys_file_offset_bits=no
      case "$host_os" in
	# HP-UX 10.20 and later
	hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
	  ac_cv_sys_file_offset_bits=64 ;;
	esac
      for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
	case "$ac_flag" in
	-D_FILE_OFFSET_BITS)
	  ac_cv_sys_file_offset_bits=1 ;;
	-D_FILE_OFFSET_BITS=*)
	  ac_cv_sys_file_offset_bits=`expr " $ac_flag" : '[^=]*=\(.*\)'` ;;
	esac
      done
      
fi

echo "$ac_t""$ac_cv_sys_file_offset_bits" 1>&6
   if test "$ac_cv_sys_file_offset_bits" != no; then
     cat >> confdefs.h <<EOF
#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
EOF

   fi
     echo $ac_n "checking for _LARGEFILE_SOURCE""... $ac_c" 1>&6
echo "configure:4306: checking for _LARGEFILE_SOURCE" >&5
if eval "test \"`echo '$''{'ac_cv_sys_largefile_source'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_cv_sys_largefile_source=no
      case "$host_os" in
	# HP-UX 10.20 and later
	hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
	  ac_cv_sys_largefile_source=1 ;;
	esac
      for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
	case "$ac_flag" in
	-D_LARGEFILE_SOURCE)
	  ac_cv_sys_largefile_source=1 ;;
	-D_LARGEFILE_SOURCE=*)
	  ac_cv_sys_largefile_source=`expr " $ac_flag" : '[^=]*=\(.*\)'` ;;
	esac
      done
      
fi

echo "$ac_t""$ac_cv_sys_largefile_source" 1>&6
   if test "$ac_cv_sys_largefile_source" != no; then
     cat >> confdefs.h <<EOF
#define _LARGEFILE_SOURCE $ac_cv_sys_largefile_source
EOF

   fi
     echo $ac_n "checking for _LARGE_FILES""... $ac_c" 1>&6
echo "configure:4335: checking for _LARGE_FILES" >&5
if eval "test \"`echo '$''{'ac_cv_sys_large_files'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_cv_sys_large_files=no
      case "$host_os" in
	# AIX 4.2 and later
	aix4.[2-9]* | aix4.1[0-9]* | aix[5-9].* | aix[1-9][0-9]*)
	  ac_cv_sys_large_files=1 ;;
	esac
      for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
	case "$ac_flag" in
	-D_LARGE_FILES)
	  ac_cv_sys_large_files=1 ;;
	-D_LARGE_FILES=*)
	  ac_cv_sys_large_files=`expr " $ac_flag" : '[^=]*=\(.*\)'` ;;
	esac
      done
      
fi

echo "$ac_t""$ac_cv_sys_large_files" 1>&6
   if test "$ac_cv_sys_large_files" != no; then
     cat >> confdefs.h <<EOF
#define _LARGE_FILES $ac_cv_sys_large_files
EOF

   fi
   fi
  
     echo $ac_n "checking for stat which doesn't support large files""... $ac_c" 1>&6
echo "configure:4366: checking for stat which doesn't support large files" >&5
     broken_stat=no
     if test -r /etc/redhat-release && \
        grep "Red Hat Linux release 6" /etc/redhat-release > /dev/null; then
	     broken_stat="yes"
	     cat >> confdefs.h <<\EOF
#define HAVE_BROKEN_STAT 1
EOF

     fi
     echo "$ac_t""$broken_stat" 1>&6
     

echo $ac_n "checking how to printf gr_gid""... $ac_c" 1>&6
echo "configure:4380: checking how to printf gr_gid" >&5
if test "$cross_compiling" = yes; then
   result="no" 
else
  cat > conftest.$ac_ext <<EOF
#line 4385 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <grp.h>
int main(int argc, char **argv) {
  struct group *grent;
  if(sizeof(grent->gr_gid)<=4)
    return 0;
  return 1;
}
EOF
if { (eval echo configure:4396: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="u"
cat >> confdefs.h <<EOF
#define GR_GID_FORMAT "$result"
EOF

echo "$ac_t""gr_gid is just a long - using %u" 1>&6
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="no" 
fi
rm -fr conftest*
fi

if test $result = "no"; then
  if test "$cross_compiling" = yes; then
   result="no"
else
  cat > conftest.$ac_ext <<EOF
#line 4418 "configure"
#include "confdefs.h"
#include <stdio.h>
  int main(int argc, char **argv) {
    if(printf("%qd",(long long) 1)==1)
      return 0;
    return 1;
  }
EOF
if { (eval echo configure:4427: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="qd" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="no" 
fi
rm -fr conftest*
fi

    if test $result = "no"; then
      if test "$cross_compiling" = yes; then
   result="no" 
else
  cat > conftest.$ac_ext <<EOF
#line 4444 "configure"
#include "confdefs.h"
#include <stdio.h>
      int main(int argc, char **argv) {
        if(printf("%lld",(long long) 1)==1)
          return 0;
        return 1;
      }
EOF
if { (eval echo configure:4453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="lld" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="no" 
fi
rm -fr conftest*
fi

      if test $result = "no"; then
        if test "$cross_compiling" = yes; then
   result="d" 
else
  cat > conftest.$ac_ext <<EOF
#line 4470 "configure"
#include "confdefs.h"
#include <stdio.h>
        int main(int argc, char **argv) {
          if(printf("%ld",(long long) 1)==1)
            return 0;
          return 1;
        }
EOF
if { (eval echo configure:4479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="ld" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="d" 
fi
rm -fr conftest*
fi

      fi
    fi
  cat >> confdefs.h <<EOF
#define GR_GID_FORMAT "$result"
EOF

  echo "$ac_t""%$result" 1>&6
fi

echo $ac_n "checking how to printf pw_uid""... $ac_c" 1>&6
echo "configure:4501: checking how to printf pw_uid" >&5
if test "$cross_compiling" = yes; then
   result="no" 
else
  cat > conftest.$ac_ext <<EOF
#line 4506 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <pwd.h>
int main(int argc, char **argv) {
  struct passwd *pwent;
  if(sizeof(pwent->pw_uid)<=4)
    return 0;
  return 1;
}
EOF
if { (eval echo configure:4517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="u"
cat >> confdefs.h <<EOF
#define PW_UID_FORMAT "$result"
EOF

echo "$ac_t""uid_t is just a long - using %u" 1>&6
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="no" 
fi
rm -fr conftest*
fi

if test $result = "no"; then
  if test "$cross_compiling" = yes; then
   result="no"
else
  cat > conftest.$ac_ext <<EOF
#line 4539 "configure"
#include "confdefs.h"
#include <stdio.h>
  int main(int argc, char **argv) {
    if(printf("%qd",(long long) 1)==1)
      return 0;
    return 1;
  }
EOF
if { (eval echo configure:4548: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="qd" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="no" 
fi
rm -fr conftest*
fi

    if test $result = "no"; then
      if test "$cross_compiling" = yes; then
   result="no" 
else
  cat > conftest.$ac_ext <<EOF
#line 4565 "configure"
#include "confdefs.h"
#include <stdio.h>
      int main(int argc, char **argv) {
        if(printf("%lld",(long long) 1)==1)
          return 0;
        return 1;
      }
EOF
if { (eval echo configure:4574: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="lld" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="no" 
fi
rm -fr conftest*
fi

      if test $result = "no"; then
        if test "$cross_compiling" = yes; then
   result="d" 
else
  cat > conftest.$ac_ext <<EOF
#line 4591 "configure"
#include "confdefs.h"
#include <stdio.h>
        int main(int argc, char **argv) {
          if(printf("%ld",(long long) 1)==1)
            return 0;
          return 1;
        }
EOF
if { (eval echo configure:4600: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="%ld" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="d" 
fi
rm -fr conftest*
fi

      fi
    fi
  cat >> confdefs.h <<EOF
#define PW_UID_FORMAT "$result"
EOF

  echo "$ac_t""%$result" 1>&6
fi

echo $ac_n "checking how to printf an off_t""... $ac_c" 1>&6
echo "configure:4622: checking how to printf an off_t" >&5
if test "$cross_compiling" = yes; then
   result="no" 
else
  cat > conftest.$ac_ext <<EOF
#line 4627 "configure"
#include "confdefs.h"
#ifdef HAVE_STDLIB_H
#include <stdlib.h>
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#include <sys/types.h>
#include <sys/stat.h>
int main(int argc, char **argv) {
  if(sizeof(off_t)<=4)
    return 0;
  return 1;
}
EOF
if { (eval echo configure:4643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="u"
cat >> confdefs.h <<EOF
#define L_FORMAT "$result"
EOF

echo "$ac_t""off_t is just a long - using %u" 1>&6
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="no" 
fi
rm -fr conftest*
fi

if test $result = "no"; then
  if test "$cross_compiling" = yes; then
   result="no"
else
  cat > conftest.$ac_ext <<EOF
#line 4665 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <sys/types.h>
  int main(int argc, char **argv) {
    char tstr[8];
    if(sprintf(tstr, "%qd",(long long) 1)==1)
      return 0;
    return 1;
  }
EOF
if { (eval echo configure:4676: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="qd" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="no" 
fi
rm -fr conftest*
fi

    if test $result = "no"; then
      if test "$cross_compiling" = yes; then
   result="no" 
else
  cat > conftest.$ac_ext <<EOF
#line 4693 "configure"
#include "confdefs.h"
#include <stdio.h>
      int main(int argc, char **argv) {
        char tstr[8];
        if(sprintf(tstr, "%lld",(long long) 1)==1)
          return 0;
        return 1;
      }
EOF
if { (eval echo configure:4703: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="lld" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="no" 
fi
rm -fr conftest*
fi

      if test $result = "no"; then
        if test "$cross_compiling" = yes; then
   result="d" 
else
  cat > conftest.$ac_ext <<EOF
#line 4720 "configure"
#include "confdefs.h"
#include <stdio.h>
        int main(int argc, char **argv) {
          char tstr[8];
          if(sprintf(tstr, "%ld",(long long) 1)==1)
            return 0;
          return 1;
        }
EOF
if { (eval echo configure:4730: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="ld" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="d" 
fi
rm -fr conftest*
fi

      fi
    fi
  cat >> confdefs.h <<EOF
#define L_FORMAT "$result"
EOF

  echo "$ac_t""using %$result" 1>&6
fi
echo $ac_n "checking how to printf a time_t""... $ac_c" 1>&6
echo "configure:4751: checking how to printf a time_t" >&5
if test "$cross_compiling" = yes; then
   result="no" 
else
  cat > conftest.$ac_ext <<EOF
#line 4756 "configure"
#include "confdefs.h"
#ifdef HAVE_STDLIB_H
#include <stdlib.h>
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef TIME_WITH_SYS_TIME
#include <sys/time.h>
#include <time.h>
#else
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#else
#include <time.h>
#endif
#endif
int main(int argc, char **argv) {
  if(sizeof(time_t)<=4)
    return 0;
  return 1;
}
EOF
if { (eval echo configure:4780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="u"
cat >> confdefs.h <<EOF
#define T_FORMAT "$result"
EOF

echo "$ac_t""time_t is just a long - using %u" 1>&6
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="no" 
fi
rm -fr conftest*
fi

if test $result = "no"; then
  if test "$cross_compiling" = yes; then
   result="no"
else
  cat > conftest.$ac_ext <<EOF
#line 4802 "configure"
#include "confdefs.h"
#include <stdio.h>
  int main(int argc, char **argv) {
    if(printf("%qd",(long long) 1)==1)
      return 0;
    return 1;
  }
EOF
if { (eval echo configure:4811: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="qd" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="no" 
fi
rm -fr conftest*
fi

    if test $result = "no"; then
      if test "$cross_compiling" = yes; then
   result="no" 
else
  cat > conftest.$ac_ext <<EOF
#line 4828 "configure"
#include "confdefs.h"
#include <stdio.h>
      int main(int argc, char **argv) {
        if(printf("lld",(long long) 1)==1)
          return 0;
        return 1;
      }
EOF
if { (eval echo configure:4837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="lld" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="no" 
fi
rm -fr conftest*
fi

      if test $result = "no"; then
        if test "$cross_compiling" = yes; then
   result="d" 
else
  cat > conftest.$ac_ext <<EOF
#line 4854 "configure"
#include "confdefs.h"
#include <stdio.h>
        int main(int argc, char **argv) {
          if(printf("ld",(long long) 1)==1)
            return 0;
          return 1;
        }
EOF
if { (eval echo configure:4863: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
   result="ld" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
   result="d" 
fi
rm -fr conftest*
fi

      fi
    fi
  cat >> confdefs.h <<EOF
#define T_FORMAT "$result"
EOF

  echo "$ac_t""%$result" 1>&6
fi


if test $ac_cv_func_usercmp != yes; then
	AUTHUSER=authuser.o
fi
if test $ac_cv_func_ftw != yes; then
	FTW=ftw.o
fi
if test $ac_cv_func_getusershell != yes; then
	GETUSERSHELL=getusershell.o
fi
if test $ac_cv_func_setuid != yes; then
	SCO=sco.o
else
	cat >> confdefs.h <<\EOF
#define HAVE_SETUID 1
EOF

fi
if test $ac_cv_func_snprintf != yes; then
	SNPRINTF=snprintf.o
fi
if test $ac_cv_func_strcasestr != yes; then
	STRCASESTR=strcasestr.o
fi
if test $ac_cv_func_strdup != yes; then
	STRDUP=strdup.o
fi
if test $ac_cv_func_strerror != yes; then
	STRERROR=strerror.o
fi
if test $ac_cv_func_strsep != yes; then
	STRSEP=strsep.o
fi
if test $ac_cv_func_strstr != yes; then
	STRSTR=strstr.o
fi
if test $ac_cv_func_syslog != yes; then
	SYSLOG=syslog.o
fi
if test $ac_cv_func_glob != yes; then
	GLOB=glob.o
fi
if test $ac_cv_func_strcasecmp != yes; then
	STRCASECMP=strcasecmp.o
fi
if test $ac_cv_func_strncasecmp != yes; then
	STRNCASECMP=strncasecmp.o
fi

















if test $upload = yes; then
	cat >> confdefs.h <<\EOF
#define UPLOAD 1
EOF

fi
if test $overwrite = yes; then
	cat >> confdefs.h <<\EOF
#define OVERWRITE 1
EOF

fi
if test $hostxs = yes; then
	cat >> confdefs.h <<\EOF
#define HOST_ACCESS 1
EOF

fi
if test $logfailed = yes; then
	cat >> confdefs.h <<\EOF
#define LOG_FAILED 1
EOF

fi
if test $logtoomany = yes; then
	cat >> confdefs.h <<\EOF
#define LOG_TOOMANY 1
EOF

fi
if test $private = no; then
	cat >> confdefs.h <<\EOF
#define NO_PRIVATE 1
EOF

fi
if test $dnsretry = yes; then
	cat >> confdefs.h <<\EOF
#define DNS_TRYAGAIN 1
EOF

fi
if test $anononly = yes; then
	if test $anonymous = no; then
		{ echo "configure: error: enable-anononly and disable-anonymous together don't make sense." 1>&2; exit 1; }
	fi
	cat >> confdefs.h <<\EOF
#define ANON_ONLY 1
EOF

fi
if test $paranoid = yes; then
	cat >> confdefs.h <<\EOF
#define PARANOID 1
EOF

fi
if test $quota != no; then
	for ac_hdr in sys/quota.h sys/fs/ufs_quota.h ufs/quota.h jfs/quota.h ufs/ufs/quota.h linux/quota.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:5011: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5016 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:5021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

	if test $ac_cv_header_sys_quota.h = yes -o $ac_cv_header_sys_fs_ufs_quota_h = yes -o $ac_cv_header_ufs_quota_h = yes -o $ac_cv_header_jfs_quota_h = yes -o $ac_cv_header_ufs_ufs_quota_h = yes -o $ac_cv_header_linux_quota_h = yes; then
		quota=yes
	else
		if test $quota = yes; then
			echo "configure: warning: QUOTA not supported by OS - disabled" 1>&2
		fi
		quota=no
	fi
	echo $ac_n "checking for quota support""... $ac_c" 1>&6
echo "configure:5056: checking for quota support" >&5
	echo "$ac_t""$quota" 1>&6
fi
if test $quota = yes; then
			
	if test $ac_cv_header_sys_quota_h = yes -o $ac_cv_header_sys_fs_ufs_quota_h = yes; then
		cat >> confdefs.h <<\EOF
#define QUOTA_DEVICE 1
EOF

	fi

	echo $ac_n "checking whether quota support is file- or inode based""... $ac_c" 1>&6
echo "configure:5069: checking whether quota support is file- or inode based" >&5
	cat > conftest.$ac_ext <<EOF
#line 5071 "configure"
#include "confdefs.h"

#include <unistd.h>
#ifdef TIME_WITH_SYS_TIME
#include <sys/time.h>
#include <time.h>
#else
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#else
#include <time.h>
#endif
#endif
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_QUOTA_H
#include <sys/quota.h>
#else
#ifdef HAVE_LINUX_QUOTA_H
#include <linux/quota.h>
#endif
#endif
#ifdef HAVE_SYS_FS_UFS_QUOTA_H
#include <sys/fs/ufs/quota.h>
#endif
#ifdef HAVE_UFS_QUOTA_H
#include <ufs/quota.h>
#endif
#ifdef HAVE_JFS_QUOTA_H
#include <jfs/quota.h>
#endif
#ifdef HAVE_UFS_UFS_QUOTA_H
#include <ufs/ufs/quota.h>
#endif
struct dqblk quota;
int main() {
 int f=quota.dqb_ihardlimit; 
; return 0; }
EOF
if { (eval echo configure:5112: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
   result=inode 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   result=file 
fi
rm -f conftest*
	echo "$ac_t""$result" 1>&6
	if test $result = inode; then
		cat >> confdefs.h <<\EOF
#define QUOTA_INODE 1
EOF

	fi
	cat >> confdefs.h <<\EOF
#define QUOTA 1
EOF

fi
if test $ac_cv_header_security_pam_appl_h = no; then
  if test $pam = yes; then
    echo "configure: warning: You don\'t have PAM libraries" 1>&2
    pam=no
  fi
fi
if test $pam = yes; then
	cat >> confdefs.h <<\EOF
#define USE_PAM 1
EOF

	LIBS="$LIBS -lpam"
	echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
echo "configure:5147: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5155 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {
dlopen()
; return 0; }
EOF
if { (eval echo configure:5166: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

	if test $result = yes; then
		# Some PAM implementations require -ldl...
		LIBS="$LIBS -ldl"
	fi
fi
echo $ac_n "checking for setspent in -lshadow""... $ac_c" 1>&6
echo "configure:5193: checking for setspent in -lshadow" >&5
ac_lib_var=`echo shadow'_'setspent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lshadow  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5201 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char setspent();

int main() {
setspent()
; return 0; }
EOF
if { (eval echo configure:5212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

SHADOW_PASSWORD=0
LIBSHADOW=0
if test $result = yes; then
	LIBS="$LIBS -lshadow"
	SHADOW_PASSWORD=1
	LIBSHADOW=1
else
	echo $ac_n "checking for getspnam in -lshadow""... $ac_c" 1>&6
echo "configure:5241: checking for getspnam in -lshadow" >&5
ac_lib_var=`echo shadow'_'getspnam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lshadow  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5249 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char getspnam();

int main() {
getspnam()
; return 0; }
EOF
if { (eval echo configure:5260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

	if test $result = yes; then
		LIBS="$LIBS -lshadow"
		SHADOW_PASSWORD=1
		LIBSHADOW=1
	else
		echo $ac_n "checking for setspent in -lc""... $ac_c" 1>&6
echo "configure:5287: checking for setspent in -lc" >&5
ac_lib_var=`echo c'_'setspent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lc  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5295 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char setspent();

int main() {
setspent()
; return 0; }
EOF
if { (eval echo configure:5306: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

		if test $result = yes; then
			SHADOW_PASSWORD=1
		fi
	fi
fi
if test $SHADOW_PASSWORD = 1; then
	if test $ac_cv_func_fgetspent != yes; then
		echo $ac_n "checking for fgetspent in -lshadow""... $ac_c" 1>&6
echo "configure:5335: checking for fgetspent in -lshadow" >&5
ac_lib_var=`echo shadow'_'fgetspent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lshadow  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5343 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char fgetspent();

int main() {
fgetspent()
; return 0; }
EOF
if { (eval echo configure:5354: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  result=yes
else
  echo "$ac_t""no" 1>&6
result=no
fi

		if test $result = yes; then
			if test $LIBSHADOW != 1; then
				LIBS="$LIBS -lshadow"
			fi
		fi
	fi
	cat >> confdefs.h <<\EOF
#define SHADOW_PASSWORD 1
EOF

fi
if test $ac_cv_header_skey_h = no; then
  if test $skey = yes; then
    echo "configure: warning: You don\'t have S/Key libraries" 1>&2
    skey=no
  fi
fi
if test $skey = yes; then
	cat >> confdefs.h <<\EOF
#define SKEY 1
EOF

	LIBS="$LIBS -lskey"
fi
if test $ac_cv_header_opie_h = no; then
  if test $opie = yes; then
    echo "configure: warning: You don\'t have OPIE libraries" 1>&2
    opie=no
  fi
fi

if test $opie = yes; then
	cat >> confdefs.h <<\EOF
#define OPIE 1
EOF

	LIBS="$LIBS -lopie"
fi
if test $newcd = yes; then
	cat >> confdefs.h <<\EOF
#define ALTERNATE_CD 1
EOF

fi
if test $chmod = yes; then
	cat >> confdefs.h <<\EOF
#define UNRESTRICTED_CHMOD 1
EOF

fi
if test $rfc931 = yes; then
	cat >> confdefs.h <<\EOF
#define USE_RFC931 1
EOF

fi
if test "$ratio" = "yes"; then
	cat >> confdefs.h <<\EOF
#define RATIO 1
EOF

fi
if test "$passwd" = "yes"; then
	cat >> confdefs.h <<\EOF
#define OTHER_PASSWD 1
EOF

fi
if test $daemon = yes; then
	cat >> confdefs.h <<\EOF
#define DAEMON 1
EOF

fi
if test $mapchdir = yes; then
	cat >> confdefs.h <<\EOF
#define MAPPING_CHDIR 1
EOF

fi
if test $throughput = yes; then
	cat >> confdefs.h <<\EOF
#define THROUGHPUT 1
EOF

fi
if test $count = yes; then
	cat >> confdefs.h <<\EOF
#define TRANSFER_COUNT 1
EOF

	cat >> confdefs.h <<\EOF
#define TRANSFER_LIMIT 1
EOF

fi
if test $newlines = no; then
	cat >> confdefs.h <<\EOF
#define NO_SUCKING_NEWLINES 1
EOF

fi
if test $crackers = yes; then
	cat >> confdefs.h <<\EOF
#define HELP_CRACKERS 1
EOF

fi
if test $verbose = yes; then
	cat >> confdefs.h <<\EOF
#define VERBOSE_ERROR_LOGING 1
EOF

fi
if test $noop = no; then
	cat >> confdefs.h <<\EOF
#define IGNORE_NOOP 1
EOF

fi
if test $logrp = yes; then
	cat >> confdefs.h <<\EOF
#define XFERLOG_REALPATH 1
EOF

fi
if test $virtual = yes; then
	cat >> confdefs.h <<\EOF
#define VIRTUAL 1
EOF

fi
if test $closedvirt = yes; then
	cat >> confdefs.h <<\EOF
#define CLOSED_VIRTUAL_SERVER 1
EOF

fi
if test $dns = no; then
	cat >> confdefs.h <<\EOF
#define NO_DNS 1
EOF

fi
if test $port = no; then
	if test $pasv = no; then
		{ echo "configure: error: Need at least PORT or PASV mode. Don't disable both." 1>&2; exit 1; }
	fi
	cat >> confdefs.h <<\EOF
#define DISABLE_PORT 1
EOF

fi
if test $pasv = no; then
	cat >> confdefs.h <<\EOF
#define DISABLE_PASV 1
EOF

fi
if test $plsm = no; then
	cat >> confdefs.h <<\EOF
#define NO_PID_SLEEP_MSGS 1
EOF

fi
if test $pasvip = yes; then
	cat >> confdefs.h <<\EOF
#define FIGHT_PASV_PORT_RACE 1
EOF

fi
if test $anonymous = no; then
	cat >> confdefs.h <<\EOF
#define NO_ANONYMOUS_ACCESS 1
EOF

fi
if test $ls = yes; then
	cat >> confdefs.h <<\EOF
#define INTERNAL_LS 1
EOF

fi
if test $numericuid = yes; then
	cat >> confdefs.h <<\EOF
#define LS_NUMERIC_UIDS 1
EOF

fi
if test $hidesetuid = yes; then
	cat >> confdefs.h <<\EOF
#define HIDE_SETUID 1
EOF

fi
if test $mail = yes; then
	cat >> confdefs.h <<\EOF
#define MAIL_ADMIN 1
EOF

fi
if test $badclients = yes; then
	cat >> confdefs.h <<\EOF
#define SUPPORT_BROKEN_CLIENTS 1
EOF

fi

if test x`expr $bufsize + 1 - 1 2>/dev/null` = x$bufsize; then
	cat >> confdefs.h <<EOF
#define BUFFER_SIZE $bufsize
EOF

fi
if test x`expr $backlog + 1 - 1 2>/dev/null` = x$backlog; then
	cat >> confdefs.h <<EOF
#define MAX_BACKLOG $backlog
EOF

else
	cat >> confdefs.h <<EOF
#define MAX_BACKLOG 100
EOF

fi

cat >> confdefs.h <<EOF
#define SIGNAL_TYPE void
EOF


LIBS="$LIBS -lsupport"



case $GPT_LINKTYPE in
	static)
	        STATIC_FLAGS="-static"
		
	;;
esac





cat >> confdefs.h <<\EOF
#define USE_ETC 1
EOF



if test ! -d util ; then
	mkdir util
fi

trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr `echo "Makefile Doxyfile src/Makefile support/Makefile util/privatepw/Makefile src/pathnames.h config.h src/config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@GLOBUS_LIBTOOL@%$GLOBUS_LIBTOOL%g
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@CC@%$CC%g
s%@RANLIB@%$RANLIB%g
s%@YACC@%$YACC%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@AR@%$AR%g
s%@CPP@%$CPP%g
s%@DOXYGEN@%$DOXYGEN%g
s%@DOXYFILE@%$DOXYFILE%g
s%@DOT@%$DOT%g
s%@PERL@%$PERL%g
s%@HAVE_DOT@%$HAVE_DOT%g
s%@lac_doxygen_srcdirs@%$lac_doxygen_srcdirs%g
s%@lac_doxygen_project@%$lac_doxygen_project%g
s%@lac_doxygen_output_tagfile@%$lac_doxygen_output_tagfile%g
s%@lac_doxygen_tagfiles@%$lac_doxygen_tagfiles%g
s%@lac_doxygen_internal_tagfiles@%$lac_doxygen_internal_tagfiles%g
s%@lac_doxygen_installdox@%$lac_doxygen_installdox%g
s%@lac_doxygen_file_patterns@%$lac_doxygen_file_patterns%g
s%@lac_doxygen_examples@%$lac_doxygen_examples%g
s%@lac_doxygen_predefines@%$lac_doxygen_predefines%g
s%@CPLN@%$CPLN%g
s%@ETCDIR@%$ETCDIR%g
s%@PIDDIR@%$PIDDIR%g
s%@LOGDIR@%$LOGDIR%g
s%@GPT_LDFLAGS@%$GPT_LDFLAGS%g
s%@GSSAPI_LIBS@%$GSSAPI_LIBS%g
s%@GSSAPI_LDFLAGS@%$GSSAPI_LDFLAGS%g
s%@GSSAPI_CFLAGS@%$GSSAPI_CFLAGS%g
s%@GLOBUS_DATA_CFLAGS@%$GLOBUS_DATA_CFLAGS%g
s%@GLOBUS_DATA_LDFLAGS@%$GLOBUS_DATA_LDFLAGS%g
s%@GLOBUS_DATA_LIBS@%$GLOBUS_DATA_LIBS%g
s%@GSSAPI_SRC@%$GSSAPI_SRC%g
s%@AFS_LIBS@%$AFS_LIBS%g
s%@AFS_LDFLAGS@%$AFS_LDFLAGS%g
s%@AFS_CFLAGS@%$AFS_CFLAGS%g
s%@AFS_SRC@%$AFS_SRC%g
s%@GETCONF@%$GETCONF%g
s%@AUTHUSER@%$AUTHUSER%g
s%@FTW@%$FTW%g
s%@GETUSERSHELL@%$GETUSERSHELL%g
s%@SCO@%$SCO%g
s%@SNPRINTF@%$SNPRINTF%g
s%@STRCASESTR@%$STRCASESTR%g
s%@STRDUP@%$STRDUP%g
s%@STRERROR@%$STRERROR%g
s%@STRSEP@%$STRSEP%g
s%@STRSTR@%$STRSTR%g
s%@SYSLOG@%$SYSLOG%g
s%@GLOB@%$GLOB%g
s%@STRCASECMP@%$STRCASECMP%g
s%@STRNCASECMP@%$STRNCASECMP%g
s%@STATIC_FLAGS@%$STATIC_FLAGS%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"Makefile Doxyfile src/Makefile support/Makefile util/privatepw/Makefile src/pathnames.h"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  [/$]*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_uB='\([ 	]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'

if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
  CONFIG_HEADERS="config.h src/config.h"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  echo creating $ac_file

  rm -f conftest.frag conftest.in conftest.out
  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  cat $ac_file_inputs > conftest.in

EOF

# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h.  And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF

# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.

rm -f conftest.tail
while :
do
  ac_lines=`grep -c . conftest.vals`
  # grep -c gives empty output for an empty file on some AIX systems.
  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
  # Write a limited-size here document to conftest.frag.
  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
  echo 'CEOF
  sed -f conftest.frag conftest.in > conftest.out
  rm -f conftest.in
  mv conftest.out conftest.in
' >> $CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
  rm -f conftest.vals
  mv conftest.tail conftest.vals
done
rm -f conftest.vals

cat >> $CONFIG_STATUS <<\EOF
  rm -f conftest.frag conftest.h
  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
  cat conftest.in >> conftest.h
  rm -f conftest.in
  if cmp -s $ac_file conftest.h 2>/dev/null; then
    echo "$ac_file is unchanged"
    rm -f conftest.h
  else
    # Remove last slash and all that follows it.  Not all systems have dirname.
      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
      # The file is in a subdirectory.
      test ! -d "$ac_dir" && mkdir "$ac_dir"
    fi
    rm -f $ac_file
    mv conftest.h $ac_file
  fi
fi; done

EOF
cat >> $CONFIG_STATUS <<EOF

EOF
cat >> $CONFIG_STATUS <<\EOF

exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1

