# translation of English to German # Copyright (C) 2003 Joost Andrae # This file is distributed under the same license as the ReZound package. # Joost Andrae , 2003. # msgid "" msgstr "" "Project-Id-Version: ReZound 0.8.3beta\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2007-01-13 21:19-0600\n" "PO-Revision-Date: 2005-11-13 14:26+0100\n" "Last-Translator: Joost Andrae \n" "Language-Team: German \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=iso-8859-1\n" "Content-Transfer-Encoding: 8bit\n" #: src/backend/File/CSaveAsAudioFileAction.cpp:46 msgid "Save As" msgstr "Speichern Als" #: src/backend/File/CSaveAsAudioFileAction.cpp:46 msgid "Save an Audio File as a Chosen Filename" msgstr "Speichere eine Audiodatei unter einem eigenen Namen" #: src/backend/File/CNewAudioFileAction.cpp:51 msgid "New" msgstr "Neu" #: src/backend/File/CNewAudioFileAction.cpp:51 msgid "Create New Audio File" msgstr "Erstelle neue Audiodatei" #: src/backend/File/CSaveSelectionAsAction.cpp:61 msgid "Save Selection As..." msgstr "Selektion speichern als..." #: src/backend/File/CBurnToCDAction.cpp:68 msgid "cdrdao not found in the given path: " msgstr "cdrdao wurde im angegebenen Pfad nicht gefunden: " #: src/backend/File/CBurnToCDAction.cpp:96 msgid "Too many tracks defined by cues. 99 is the maximum." msgstr "Zu viele Tracks wurden durch Marker definiert. 99 ist das Maximum." #: src/backend/File/CBurnToCDAction.cpp:99 msgid "" "No appropriately named cues found to define tracks to burn. See the " "'explain' button on the previous window for how to name the cues.\n" "Would you like to continue burning the audio as one track?" msgstr "" "Keine richtig benannten Marker gefunden, um Tracks zum Speichern zu " "definieren. Drücken Sie den 'Erklären'-Button im vorhergehenden Fenster, um " "mehr darüber zu erfahren" #: src/backend/File/CBurnToCDAction.cpp:121 msgid "Track is less than 4 seconds long." msgstr "Track ist kürzer als 4 Sekunden lang." #: src/backend/File/CBurnToCDAction.cpp:137 msgid "Gap between tracks: " msgstr "Abstand zw. Tracks" #: src/backend/File/CBurnToCDAction.cpp:138 msgid "Total Burn Length: " msgstr "Aufnahmelänge: " #: src/backend/File/CBurnToCDAction.cpp:138 #: src/backend/File/CBurnToCDAction.cpp:146 #: src/backend/File/CBurnToCDAction.cpp:151 msgid "minutes" msgstr "Minuten" #: src/backend/File/CBurnToCDAction.cpp:140 #: src/backend/File/CBurnToCDAction.cpp:146 #: src/backend/File/CBurnToCDAction.cpp:151 #: src/backend/File/CSaveAsMultipleFilesAction.cpp:102 msgid "Do you want to continue?" msgstr "Möchten Sie fortfahren ?" #: src/backend/File/CBurnToCDAction.cpp:146 #: src/backend/File/CBurnToCDAction.cpp:151 msgid "Total data to be burned is " msgstr "Zu schreibende Daten sind " #: src/backend/File/CBurnToCDAction.cpp:146 msgid "You will need an 80 minute CD\n" msgstr "Sie benötigen eine 80 Minuten CD\n" #: src/backend/File/CBurnToCDAction.cpp:151 msgid "" "You will probably need to enable an --overburn or --full-burn option to " "cdrdao. See cdrdao for details. Do this at your own risk.\n" msgstr "" "Du wirst wahrscheinlich die Optionen --overburn oder --full-burn von cdrdao " "aktivieren müssen. Siehe cdrdao zu Details. Benutze dies auf eigenes " "Risiko.\n" #: src/backend/File/CBurnToCDAction.cpp:167 msgid "Writing Data to Burn" msgstr "Brennvorgang" #: src/backend/File/CBurnToCDAction.cpp:373 msgid "" "cdrdao returned non-zero exit status. Consult standard output/error for " "problems." msgstr "" "cdrdao gab einen Fehler aus. Beachte Standard Ausgabe/Fehler auf " "Fehlermeldungen." #: src/backend/File/CBurnToCDAction.cpp:377 msgid "Successful Burn Count: " msgstr "Erfolgreiche Brenn-Vorgänge: " #: src/backend/File/CBurnToCDAction.cpp:377 msgid "Would you like to burn another?" msgstr "Möchten Sie eine weitere CD brennen ?" #: src/backend/File/CBurnToCDAction.cpp:377 msgid "(Insert a new blank, and then press 'Yes'.)" msgstr "(Führen Sie eine neue, leere CD ein und bestätigen Sie.)" #: src/backend/File/CBurnToCDAction.cpp:405 msgid "" "\n" "This action can be used to burn the loaded audio file onto a CD using the " "cdrdao (CD-R Disk-At-Once) tool.\n" "\n" "Tracks are defined by cues named in a '('... [')'] fashion. See the " "'Explain' button on the 'File->Save As Multiple Files' action on how this is " "done. Some parts of that explaination should be obviously non-applicable.\n" "\n" "cdrdao must be installed on this system. $PATH with be searched for " "'cdrdao' when ReZound starts, but if it is not found you will need to supply " "the path to it on the action dialog.\n" "\t" msgstr "" "\n" "Diese Aktion kann zum Brennen von geladenen Audio-Dateien benutzt werden. Es " "benutzt das cdrdao (CD-R Disk-At-Once) Tool.\n" "\n" "Tracks sind durch Marker definiert in einer '('... [')'] Schreibweise. " "Beachte den 'Erkläre' Button der 'Datei->Speichern Als Mehrere Dateien' " "Aktion um nähere Infos zu bekommen. Einige Teile der Erklärung sollten nicht " "leicht verstehbar sein.\n" "\n" "cdrdao muß auf dem System installiert sein. $PATH wird nach 'cdrdao' " "duchsucht, wenn ReZound startet, aber wenn es nicht gefunden wurde, kann der " "Pfad im Aktionen-Dialog konfiguriert werden.\n" "\t" #: src/backend/File/CBurnToCDAction.cpp:451 msgid "Burning..." msgstr "Brenne..." #: src/backend/File/CBurnToCDAction.cpp:576 msgid "Burn to CD" msgstr "Brennen auf CD" #: src/backend/File/CSaveAudioFileAction.cpp:45 msgid "Save" msgstr "Speichern" #: src/backend/File/CSaveAudioFileAction.cpp:45 msgid "Save an Audio File" msgstr "Speichern einer Audiodatei" #: src/backend/File/COpenAudioFileAction.cpp:45 msgid "Open" msgstr "Ö&ffnen" #: src/backend/File/COpenAudioFileAction.cpp:45 msgid "Open an Audio File" msgstr "Audiodatei öffnen" #: src/backend/File/CSaveAsMultipleFilesAction.cpp:81 msgid "" "No appropriately named cues found to define segments to save. See the " "'explain' button on the previous window for how to name the cues." msgstr "" "Keine richtig benannten Marker gefunden, um Segmente zum Speichern zu " "definieren. Drücken Sie den 'Erklären'-Button im vorhergehenden Fenster, um " "mehr darüber zu erfahren" #: src/backend/File/CSaveAsMultipleFilesAction.cpp:98 msgid "These are the files about to be created..." msgstr "Dies sind die Dateien, welche noch angelegt werden..." #: src/backend/File/CSaveAsMultipleFilesAction.cpp:115 msgid "" "The file was not saved successfully. Do you wish to abort saving any other " "files?" msgstr "" "Die Datei wurde nicht ordnungsgemäß gespeichert. Möchten Sie das Speichern " "anderer Dateien abbrechen ?" #: src/backend/File/CSaveAsMultipleFilesAction.cpp:147 msgid "" "\n" "To save a large file (or just a selection from it) as several smaller " "segments you can create cues that define the segments and then click on " "\"Save As Multiple Files\" under the \"File\" menu.\n" "\n" "In general, cues can be named '(' and ')' to define the beginning and end of " "each segment to be saved.\n" "However, a ')' cue (closing a prior '(' cue) can be ommitted if a segment is " "to end at the beginning of the next segment.\n" "The very last ')' cue can also be ommitted if the last defined segment is to " "end at the end of the original audio file (or the end of the selection).\n" "Furthermore, the '(' cue can optionally be named '(xyz' if 'xyz' is to be " "included in the segment's filename.\n" "\n" "There are several parameters in the dialog that is displayed after selecting " "\"Save As Multiple Files\" under the \"File\" menu.\n" "The \"Save to Directory\" parameter is the directory to place each segment " "file into.\n" "The \"Filename Prefix\" will be placed before the optional 'xyz' from the " "'(xyz' cue name.\n" "The \"Filename Suffix\" will be placed after of the optional 'xyz' from the " "'(xyz' cue name.\n" "The \"Format\" parameter in specifies what audio format the segments should " "be saved as.\n" "After a segment's filename is formed by putting together, [directory]/" "[prefix][xyz][suffix].[format extension], if it contains '#' then the '#' " "will be replaced with a number based on the order that the segments are " "defined.\n" " For instance: \"/home/john/sounds/track #.wav\" will be changed to \"/" "home/john/sounds/track 1.wav\" for the first segment that is saved, and all " "the subsequent segments will contain an increasing number.\n" " Thus, you should use a '#' in either the save to directory, filename " "prefix, xyz, or the filename suffix to create unique filenames when saving " "the segments.\n" "The \"Segment Number Start\" parameter can be changed from '1' to start the " "'#' substitutions at something different.\n" "The \"Open Saved Segments\" can be selected simply if you want to open the " "segments after they have been saved.\n" "The \"Applies to\" parameter indicates if the action should regard only the " "current selection or the entire file.\n" "The \"Prompt Only Once for Save Parameters\" can be selected if you want the " "same save parameters to be applied to all files (i.e compression type, audio " "format, etc).\n" msgstr "" "\n" "Um eine größere Datei (oder nur eine Selektion) als mehrere kleine Segmente " "zu speichern, können Sie Marker hinzufügen, welche diese Segmente " "definieren, um danach \"Speichern als mehrere Dateien\" im \"Datei\"-Menü " "anzuwählen\n" "Allgemein können Marker als '(' und ')' benannt werden, um Anfang und Ende " "jedes Segmentes zur Speicherung zu definieren.\n" "Jedenfalls kann ein ')' Marker weggelassen werden, sofern ein Segment am " "Anfang eines neuen Segmentes zu Ende ist.\n" "Der letzte ')' Marker kann auch weggelassen werden, wenn das letze " "definierte Segment am Ende der Audio-Daten liegt (oder am Ende der " "Selektion).\n" "Außerdem kann der '(' Marker optional auch '(xyz' benannt werden, sofern " "'xyz' in den Dateinamen des Segmentes eingefügt werden soll.\n" "\n" "Es gibt mehrere Parameter, welche im Dialog nach der Menüauswahl \"Speichern " "als mehrere Dateien\" im \"Datei\"-Menü erscheinen.\n" "Der \"Speichern in Verzeichnis\"-Parameter ist das Verzeichnis, in welches " "jedes Segment als separate Datei hineingespeichert wird.\n" "Der \"Dateinamen Präfix\" wird vor das optionale 'xyz' aus dem '(xyz' Marker " "Namen geschrieben.\n" "Der \"Dateinamen Suffix\" wird hinter das optionale xyzs' aus dem '(xyz' " "Marker Namen geschrieben.\n" "Der \"Format\"-Parameter definiert das Audio-Format mit welchem die Segmente " "gespeichert werden sollen.\n" "Nachdem der Dateiname des Segments aus [Verzeichnis]/[Präfix][xyz][Suffix]." "[Datei-Erweiterung] zusammengesetzt ist, bedeutet ein '#', daß es durch eine " "Zahl ersetzt, sofern die dazugehörigen Segmente definiert wurden.\n" " Zum Beispiel: \"/home/john/sounds/track #.wav\" wird umgewandelt in \"/" "home/john/sounds/track 1.wav\" für das erste gespeicherte Segment und alle " "weiteren Segmente werden eine aufsteigende Zahl erhalten.\n" " Entsprechend sollten Sie ein '#' in Verzeichnis, Dateiname Präfix, xyz, " "oder dem Dateinamen Suffix einfügen, um eindeutige Dateinamen beim Speichern " "der Segmente zu erhalten.\n" "Der \"Segment Nummer Start\"-Parameter kann der Startwert '1' verändert " "werden, um '#'-Ersetzungen mit einem anderen Wert zu starten.\n" "Der \"Zutreffend für\"-Parameter definiert, daß die aktuelle Aktion nur auf " "die aktuelle Selektion oder die gesamte Datei angewandt wird.\n" "Der \"Nur Nachfragen für Speichern-Parameter\" kann selektiert werden, wenn " "dieselben Speicher-Parameter auf alle Dateien angewandt werden sollen (z.B. " "Komprimierungs-Art, Audio-Format, etc.).\n" #: src/backend/File/CSaveAsMultipleFilesAction.cpp:174 msgid "Save As Multiple Files" msgstr "Speichern als mehrere Dateien" #: src/backend/initialize.cpp:162 msgid "Native Clipboard " msgstr "Natives Clipboard " #: src/backend/initialize.cpp:175 msgid "Record Clipboard " msgstr "Aufnahme Clipboard " #: src/backend/CRecordSoundClipboard.cpp:70 msgid "" "There is already data on this recording clipboard. Do you want to record " "something new?" msgstr "" "Es befinden sich bereits Daten im Aufnahme-Clipboard. Möchten Sie etwas " "neues aufnehmen ?" #: src/backend/ClameSoundTranslator.cpp:278 msgid "" "MPEG Layer-3 does not support saving user notes or cues\n" "Do you wish to continue?" msgstr "" "MPEG Layer-3 kann keine Notizen oder Marker speichern\n" "Möchten Sie fortfahren ?" #: src/backend/ClameSoundTranslator.cpp:354 #: src/backend/CFLACSoundTranslator.cpp:233 #: src/backend/ClibaudiofileSoundTranslator.cpp:521 msgid "Saving Sound" msgstr "Speichere Sound" #: src/backend/ASoundPlayer.cpp:571 msgid "" "No audio output method could be initialized -- Playing will be disabled." msgstr "" "Es konnte kein Audio-Ausgabegerät initialisiert werden -- Ausgabe wird " "deaktiviert." #: src/backend/ASoundPlayer.cpp:576 msgid "" "Either no audio output method was enabled at configure-time, or no method " "was recognized in the registry:AudioOutputMethods[] setting" msgstr "" "Entweder wurde keine Audio-Ausgabemethode konfiguriert oder es wurde keine " "Methode festgelegt in registry:AudioOutputMethods[] Einstellungen" #: src/backend/CMacroPlayer.cpp:61 msgid "" "At this point when the macro was recorded the selected sound was changed to " "position: " msgstr "" "An dieser Stelle, als das Makro aufgezeichnet wurde, wurde der selektierte " "Sound an folgende Stelle verschoben: " #: src/backend/CMacroPlayer.cpp:61 msgid "" "No audio file is loaded in this position now as the macro is being played " "back.\n" "\n" "The macro playback is bailing." msgstr "" "Keine Audiodatei kann jetzt an diese Stelle geladen werden, solange das " "Makro ausgeführt wird.\n" "\n" "Die Makro-Wiedergabe steigt aus." #: src/backend/CMacroPlayer.cpp:120 msgid "" "The macro being played was flagged to set the start position to the position " "of a cue with the name: " msgstr "" "Das gerade abspielende Makro wurde instruiert, um die Start-Position zu " "folgendem Marker zu setzen: " #: src/backend/CMacroPlayer.cpp:120 msgid "" "However, no cue by that name can be found. The start position will be left " "unchanged." msgstr "" "Wie auch immer, kein Marker mit diesem Namen wurde gefunden. Die Start-" "Position bleibt unverändert" #: src/backend/CMacroPlayer.cpp:149 msgid "" "The macro being played was flagged to set the stop position to the position " "of a cue with the name: " msgstr "" "Das gerade abspielende Makro wurde instruiert, um die Stop-Position zu " "folgendem Marker zu setzen: " #: src/backend/CMacroPlayer.cpp:149 msgid "" "However, no cue by that name can be found. The stop position will be left " "unchanged." msgstr "" "Wie auch immer, kein Marker mit diesem Namen konnte gefunden werden. Die " "Stop-Position wird nicht verändert werden." #: src/backend/CMacroPlayer.cpp:190 msgid "Action: " msgstr "Aktion: " #: src/backend/CMacroPlayer.cpp:190 msgid "" "This action in the macro was marked to ask this question when the macro was " "recorded.\n" "\n" "Would you like to use choose new action parameters now, overriding the ones " "chosen when the macro was recorded?" msgstr "" "Diese Aktion in dem Makro war markiert, um diese Frage zu stellen, als das " "Makro aufgezeichnet wurde.\n" "\n" "Möchtest Du neue Aktionsparameter wählen, welche diejenigen überschreiben, " "die bei Makroaufzeichnung gewählt wurden ?" #: src/backend/CMacroPlayer.cpp:210 msgid "When the macro was recorded a clipboard existed with the description: " msgstr "" "Als ein Makro aufgezeichnet wurde, gab es ein Clipboard mit folgender " "Beschreibung: " #: src/backend/CMacroPlayer.cpp:210 msgid "However, now there is no clipboard with that description." msgstr "Wie auch immer, nun gibt es kein Clipboard mehr mit der Beschreibung." #: src/backend/CMacroPlayer.cpp:230 msgid "" "The action did not succeed.\n" "\n" "Do you want to continue running the macro's remaining actions?" msgstr "" "Die Aktion war nicht erfolgreich.\n" "\n" "Sollen die verbleibenden Aktionen des Makros noch ausgeführt werden ?" #: src/backend/LADSPA/CLADSPAAction.cpp:85 msgid "" "You are recording a macro.\n" "\n" "Due to the way in which LADSPA is implemented, when the macro is played back " "for things to repeat as expected, the files refered to by the routing " "parameters (including the file being altered) must be loaded in the same " "positions as they currently appear in the loaded sound list window.\n" "\n" "This is due to the fact that the saved LADSPA parameters in the macro refer " "to the index of the loaded file rather than the name of the file. This " "could be improved later." msgstr "" "Du zeichnest ein Makro auf.\n" "\n" "In der Art und Weise, wie LADSPA implementiert wurde, wenn ein Makro für " "Wiederholungen von vordefinierten Aktionen wiedergegeben wird, müssen die " "Dateien, welche von den Routing-Parametern genutzt werden (beinhaltet auch " "die veränderte Datei), an denselben Positionen geladen werden, wie sie auch " "im Fenster der geladenen Sounds dargestellt werden.\n" "\n" "Dies ist aufgrund der Tatsache, daß die gespeicherten LADSPA-Parameter im " "Makro zum Index der geladenen Dateien, anstatt zum Namen der Datei " "referenzieren. Dies könnte später nochmal verbessert werden." #: src/backend/LADSPA/CLADSPAAction.cpp:424 msgid "Pass Through " msgstr "Durchreichen" #: src/backend/Edits/CRemoveChannelsEdit.cpp:76 msgid "Remove Channels" msgstr "Kanäle löschen" #: src/backend/Edits/CRemoveChannelsEdit.cpp:76 msgid "Remove Channels of Audio" msgstr "Audio-Kanäle löschen" #: src/backend/Edits/CCopyCutDeleteEdit.cpp:48 msgid "cannot copy/cut to clipboard: " msgstr "kann nicht Ausschneiden/Kopieren: " #: src/backend/Edits/CCopyCutDeleteEdit.cpp:91 msgid "Copy" msgstr "Kopieren" #: src/backend/Edits/CCopyCutDeleteEdit.cpp:110 msgid "Cut" msgstr "Ausschneiden" #: src/backend/Edits/CCopyCutDeleteEdit.cpp:129 msgid "Delete" msgstr "Löschen" #: src/backend/Edits/CMuteEdit.cpp:62 msgid "Mute" msgstr "Stumm" #: src/backend/Edits/CDuplicateChannelEdit.cpp:48 msgid "" "Inserting this many more channels will add more than the maximum allowed " "channels." msgstr "" "Einfügen dieser Anzahl Kanäle wird mehr, als die maximal erlaubte Anzahl " "Kanäle hinzufügen." #: src/backend/Edits/CDuplicateChannelEdit.cpp:79 msgid "Duplicate Channel" msgstr "Kanäle duplizieren" #: src/backend/Edits/CCueAction.cpp:63 src/frontend_fox/CRecordDialog.cpp:91 msgid "Add Cue" msgstr "Marker hinzufügen" #: src/backend/Edits/CCueAction.cpp:87 #, fuzzy msgid "Add Cue While Playing" msgstr "Marker an dieser Position hinzufügen" #: src/backend/Edits/CCueAction.cpp:143 msgid "Remove Cue" msgstr "Marker löschen" #: src/backend/Edits/CCueAction.cpp:202 msgid "Replace Cue" msgstr "Marker ersetzen" #: src/backend/Edits/CCueAction.cpp:269 msgid "Move Cue" msgstr "Marker verschieben" #: src/backend/Edits/CSwapChannelsEdit.cpp:66 msgid "Swap Channels" msgstr "Kanäle tauschen" #: src/backend/Edits/CSwapChannelsEdit.cpp:66 msgid "Swap the Audio Between Two Channels" msgstr "Tauschen der Audio-Daten zweier Kanäle" #: src/backend/Edits/CSelectionEdit.cpp:27 msgid "Select All" msgstr "Alles Selektieren" #: src/backend/Edits/CSelectionEdit.cpp:28 msgid "Select to Beginning" msgstr "Zum Anfang Selektieren" #: src/backend/Edits/CSelectionEdit.cpp:29 msgid "Select to End" msgstr "Zum Ende Selektieren" #: src/backend/Edits/CSelectionEdit.cpp:30 msgid "Flip to Beginning" msgstr "Zurück zum Anfang" #: src/backend/Edits/CSelectionEdit.cpp:31 msgid "Flip to End" msgstr "Zurück zum Ende" #: src/backend/Edits/CSelectionEdit.cpp:32 msgid "Move Stop to Start Position" msgstr "Verschiebe Stop- zur Startposition" #: src/backend/Edits/CSelectionEdit.cpp:33 msgid "Move Start to Stop Position" msgstr "Verschiebe Start- zur Stopposition" #: src/backend/Edits/CSelectionEdit.cpp:39 msgid "Move Start Position to Beginning" msgstr "Verschiebe Startposition zum Anfang" #: src/backend/Edits/CSelectionEdit.cpp:40 msgid "Move Stop Position to End" msgstr "Verschiebe Stopposition zum Ende" #: src/backend/Edits/CSelectionEdit.cpp:41 msgid "Move Stop Position to Beginning" msgstr "Verschiebe Stopposition zum Anfang" #: src/backend/Edits/CSelectionEdit.cpp:42 msgid "Move Start Position to End" msgstr "Verschiebe Startposition zum Ende" #: src/backend/Edits/CSelectionEdit.cpp:43 msgid "Move Stop Position Backward to Start Position" msgstr "Verschiebe Stopposition rückwärts tzr Startposition" #: src/backend/Edits/CSelectionEdit.cpp:44 msgid "Move Start Position Forward to Stop Position" msgstr "Verschiebe Startpostion vorwärts zur Stopposition" #: src/backend/Edits/CSelectionEdit.cpp:250 msgid "Selection Change" msgstr "Selektion wechseln" #: src/backend/Edits/CSelectionEdit.cpp:250 msgid "Selection Change From Mouse" msgstr "Selektion wechseln von Maus" #: src/backend/Edits/CSelectionEdit.cpp:271 msgid "Grow or Slide Selection" msgstr "Vergrößern oder Aufschieben der Selektion" #: src/backend/Edits/CRotateEdit.cpp:33 msgid " -- amount is negative" msgstr " -- die Menge ist negativ" #: src/backend/Edits/CRotateEdit.cpp:73 msgid "<< Rotate Left" msgstr "<< nach links drehen" #: src/backend/Edits/CRotateEdit.cpp:95 msgid ">> Rotate Right" msgstr ">> nach rechts drehen" #: src/backend/Edits/CPasteAsNewEdit.cpp:94 msgid "Paste As New" msgstr "Einfügen als Neu" #: src/backend/Edits/CPasteAsNewEdit.cpp:94 msgid "Paste the Clipboard's Contents into a Newly Created Sound Window" msgstr "Einfügen des Clipboard-Inhaltes in ein neu angelegtes Sound Fenster" #: src/backend/Edits/CPasteAsNewEdit.cpp:116 #: src/backend/Edits/CPasteEdit.cpp:410 msgid "No data has been cut or copied to the selected clipboard yet." msgstr "Es wurden noch keine Daten ins Clipboard ausgeschnitten oder kopiert" #: src/backend/Edits/CAddChannelsEdit.cpp:60 msgid "Add Channels" msgstr "Kanäle hinzufügen" #: src/backend/Edits/CAddChannelsEdit.cpp:60 msgid "Add New Channels of Audio" msgstr "Neue Audio-Kanäle hinzufügen" #: src/backend/Edits/CCropEdit.cpp:70 msgid "Crop" msgstr "Herausschneiden" #: src/backend/Edits/CPasteEdit.cpp:281 src/backend/Edits/CPasteEdit.cpp:359 #: src/backend/Edits/CPasteEdit.cpp:392 msgid " -- unhandled pasteType: " msgstr " -- nicht behandelter Einfügen-Typ: " #: src/backend/Edits/CPasteEdit.cpp:465 msgid "Insert Paste" msgstr "Einfügen des Cipboard-Inhaltes" #: src/backend/Edits/CPasteEdit.cpp:465 msgid "Insert at the Start Position" msgstr "Einfügen an der Start-Position" #: src/backend/Edits/CPasteEdit.cpp:485 msgid "Replace Paste" msgstr "Einfügung ersetzen" #: src/backend/Edits/CPasteEdit.cpp:485 msgid "Replace the Selection" msgstr "Ersetzen der Selektion" #: src/backend/Edits/CPasteEdit.cpp:504 msgid "Overwrite Paste" msgstr "Überschreiben der Einfügung" #: src/backend/Edits/CPasteEdit.cpp:504 msgid "Overwrite Starting at the Start Position" msgstr "Überschreibung ab der Start-Position" #: src/backend/Edits/CPasteEdit.cpp:524 msgid "Limited Overwrite Paste" msgstr "Eingeschänktes Überschreiben aus Clipboard-Inhalt" #: src/backend/Edits/CPasteEdit.cpp:524 msgid "" "Overwrite Starting at the Start Position But Not Beyond the Stop Position" msgstr "" "Überschreibe ab Start-Position, jedoch nicht über die Stop-Position hinaus" #: src/backend/Edits/CPasteEdit.cpp:544 msgid "Mix Paste" msgstr "Mischen aus Clipboard-Inhalt" #: src/backend/Edits/CPasteEdit.cpp:544 msgid "Mix Starting at the Start Position" msgstr "Mischen ab Start-Position" #: src/backend/Edits/CPasteEdit.cpp:563 msgid "Limited Mix Paste" msgstr "Eingeschränktes Mischen aus Clipboard-Inhalt" #: src/backend/Edits/CPasteEdit.cpp:563 msgid "Mix Starting at the Start Position But Not Beyond the Stop Position" msgstr "Mischen ab Start-Position, jedoch nicht über die Stop-Position hinaus" #: src/backend/Edits/CPasteEdit.cpp:582 msgid "Fit Mix Paste" msgstr "Anpassen der Mischung aus Cipboard-Inhalt" #: src/backend/Edits/CPasteEdit.cpp:582 msgid "" "Mix Starting at the Start Position But Change the Rate of the Clipboard to " "Fit Within the Selection" msgstr "" "Mischen ab Start-Position, aber Ändern der Frequenz des Clipboards um mit " "der Selektion zu passen" #: src/backend/Edits/CCopyCutToNewEdit.cpp:105 msgid "Copy to New" msgstr "Kopieren in Neues" #: src/backend/Edits/CCopyCutToNewEdit.cpp:105 msgid "Copy to Selection to a Newly Created Sound Window" msgstr "Kopieren in Selektion eines neu angelegten Sound Fensters" #: src/backend/Edits/CCopyCutToNewEdit.cpp:124 msgid "Cut to New" msgstr "Ausschneiden in Neues" #: src/backend/Edits/CCopyCutToNewEdit.cpp:124 msgid "Cut and Move the Selection to a Newly Created Sound Window" msgstr "" "Ausschneiden und verschieben der Selektion in ein neu angelegtes Sound " "Fenster" #: src/backend/Edits/CInsertSilenceEdit.cpp:31 msgid " -- silenceLength is less than zero: " msgstr " -- Länge der Stille ist kleiner als Null: " #: src/backend/Edits/CInsertSilenceEdit.cpp:71 msgid "Insert Silence" msgstr "Stille einfügen" #: src/backend/CMIDISDSSoundTranslator.cpp:384 msgid "Downloading Sample" msgstr "Lade das Sample" #: src/backend/CMIDISDSSoundTranslator.cpp:474 msgid "Keeping what was received" msgstr "Behalte, was empfangen wurde" #: src/backend/CMIDISDSSoundTranslator.cpp:644 msgid "Uploading Sample" msgstr "Sende das Sample" #: src/backend/CMIDISDSSoundTranslator.cpp:644 msgid "Dumping Sample" msgstr "Ausgabe des Samples" #: src/backend/Generate/CGenerateToneAction.cpp:66 msgid "Generating Tone -- Channel " msgstr "Töne erstellen -- Kanal " #: src/backend/Generate/CGenerateToneAction.cpp:177 msgid "Generate Tone" msgstr "Töne erstellen" #: src/backend/Generate/CGenerateNoiseAction.cpp:255 msgid "Generate Noise" msgstr "Geräusch erstellen" #: src/backend/Generate/CGenerateNoiseAction.cpp:255 msgid "Generate Various Colors of Noise" msgstr "Verschiedene Geräusch-Farben erstellen" #: src/backend/CNativeSoundClipboard.cpp:72 msgid "Copying to Clipboard -- Channel " msgstr "Kopieren der Daten -- Kanal " #: src/backend/CSound.cpp:1088 msgid "Copying/Fitting Data -- Channel " msgstr "Kopieren/Anpassen der Daten -- von Kanal " #: src/backend/CSound.cpp:1110 src/backend/CSound.cpp:1127 msgid "Copying Data -- Channel " msgstr "Kopieren der Daten -- von Kanal " #: src/backend/CSound.cpp:1148 msgid "Mixing/Fitting Data (add) -- Channel " msgstr "Mischen/Anpassen der Daten (Hinzufügen) -- von Kanal " #: src/backend/CSound.cpp:1170 src/backend/CSound.cpp:1188 msgid "Mixing Data (add) -- Channel " msgstr "Mischen der Daten (Hinzufügen) -- von Kanal " #: src/backend/CSound.cpp:1213 msgid "Mixing/Fitting Data (subtract) -- Channel " msgstr "Mischen/Anpassen der Daten (Subtrahieren) -- von Kanal " #: src/backend/CSound.cpp:1235 src/backend/CSound.cpp:1253 msgid "Mixing Data (subtract) -- Channel " msgstr "Mischen der Daten (Subtrahieren) -- von Kanal " #: src/backend/CSound.cpp:1278 msgid "Mixing/Fitting Data (multiply) -- Channel " msgstr "Mischen/Anpassen der Daten (Multiplizieren) -- mit Kanal " #: src/backend/CSound.cpp:1300 src/backend/CSound.cpp:1318 msgid "Mixing Data (multiply) -- Channel " msgstr "Mischen der Daten (Multiplizieren) -- mit Kanal " #: src/backend/CSound.cpp:1343 msgid "Mixing/Fitting Data (average) -- Channel " msgstr "Mischen/Anpassen der Daten (Mittelwert) -- von Kanal " #: src/backend/CSound.cpp:1365 src/backend/CSound.cpp:1383 msgid "Mixing Data (average) -- Channel " msgstr "Mischen der Daten (Mittelwert) -- von Kanal " #: src/backend/CSound.cpp:1680 msgid "File: " msgstr "Datei: " #: src/backend/CSound.cpp:1680 msgid "" "A temporary file was found indicating that this file was previously being " "edited when a crash occurred or the process was killed.\n" "\n" "Do you wish to attempt to recover from this temporary file (otherwise the " "file will be deleted)?" msgstr "" "Eine Datei wurde gefunden, welche darauf hinweist, daß diese Datei benutzt " "wurde während ein Absturz erfolgte oder der Prozess gekillt wurde.\n" "\n" "Wünschen Sie diese Datei wiederherzustellen (andernfalls wird sie gelöscht) ?" #: src/backend/CFLACSoundTranslator.cpp:67 #: src/backend/ClibaudiofileSoundTranslator.cpp:212 msgid "Loading Sound" msgstr "Lade Sound" #: src/backend/CFLACSoundTranslator.cpp:255 msgid "" "Saving user notes or cues is unimplemented for FLAC\n" "Do you wish to continue?" msgstr "" "Speichern von Notizen oder Markern ist in FLAC nicht vorgesehen\n" "Möchten sie fortfahren ?" #: src/backend/ALFO.cpp:489 msgid "Sine Wave [-1,1]" msgstr "Sinuskurve [-1,1]" #: src/backend/ALFO.cpp:491 msgid "Sine Wave [ 0,1]" msgstr "Sinuskurve [ 0,1]" #: src/backend/ALFO.cpp:493 msgid "ABS Sine Wave [ 0,1]" msgstr "ABS Sinuskurve [ 0,1]" #: src/backend/ALFO.cpp:495 msgid "Constant" msgstr "Konstante" #: src/backend/ALFO.cpp:497 msgid "Rising Sawtooth Wave [-1,1]" msgstr "Ansteigende Sägezahnkurve [-1,1]" #: src/backend/ALFO.cpp:499 msgid "Rising Sawtooth Wave [ 0,1]" msgstr "Ansteigende Sägezahnkurve [ 0,1]" #: src/backend/ALFO.cpp:501 msgid "Falling Sawtooth Wave [-1,1]" msgstr "Absteigende Sägezahnkurve [-1,1]" #: src/backend/ALFO.cpp:503 msgid "Falling Sawtooth Wave [ 0,1]" msgstr "Absteigende Sägezahnkurve [ 0,1]" #: src/backend/ALFO.cpp:505 msgid "Square Wave [-1,1]" msgstr "Rechteckwelle [-1,1]" #: src/backend/ALFO.cpp:507 msgid "Square Wave [ 0,1]" msgstr "Rechteckwelle [ 0,1]" #: src/backend/ASoundFileManager.cpp:141 msgid " -- file already opened" msgstr " -- Datei bereits geöffnet" #: src/backend/ASoundFileManager.cpp:268 src/backend/ASoundFileManager.cpp:325 msgid " -- file is currently opened" msgstr " -- Datei ist zurzeit geöffnet" #: src/backend/ASoundFileManager.cpp:274 src/backend/ASoundFileManager.cpp:329 msgid "Overwrite Existing File" msgstr "Überschreibe vorhandene Datei" #: src/backend/ASoundFileManager.cpp:353 src/backend/ASoundFileManager.cpp:360 msgid "Save Modified Sound" msgstr "Speichere veränderten Sound" #: src/backend/ASoundFileManager.cpp:417 msgid "Are you sure you want to revert to the last saved copy of" msgstr "Sind Sie sich sicher, daß Sie zurückkehren möchten zur Kopie von" #: src/backend/ASoundFileManager.cpp:525 msgid "Load sound from previous session?" msgstr "Möchten Sie den Sound der letzten Session laden ?" #: src/backend/ASoundRecorder.cpp:555 msgid "No audio input method could be initialized" msgstr "Keine Audio-Eingabemethode konnte initialisiert werden" #: src/backend/ASoundRecorder.cpp:561 msgid "" "Either no audio input method was enabled at configure-time, or no method was " "recognized in the registry:AudioInputMethods[] setting" msgstr "" "Entweder wurde keine Audio-Eingabemethode konfiguriert oder es wurde keine " "Methode festgestellt in registry:AudioInputMethods[] Einstellungen" #: src/backend/CJACKSoundRecorder.cpp:65 src/backend/CJACKSoundPlayer.cpp:78 msgid " -- error connecting to jack server -- jackd not running?" msgstr " -- Fehler bei Verbindung zu Jack-Server -- jackd nicht gestartet ?" #: src/backend/CJACKSoundRecorder.cpp:110 msgid "Choose Port for Input Channel " msgstr "Wählen Sie den Port für den Eingabe-Kanal " #: src/backend/CJACKSoundRecorder.cpp:116 src/backend/CJACKSoundPlayer.cpp:131 msgid "Cannot connect to JACK port, " msgstr "Keine Verbindung zum JACK-Port " #: src/backend/CJACKSoundRecorder.cpp:116 src/backend/CJACKSoundPlayer.cpp:131 msgid ", please choose a different one" msgstr ", bitte verwenden Sie einen anderen" #: src/backend/CrezSoundTranslator.cpp:510 msgid "Loading Channel " msgstr "Lade Kanal " #: src/backend/CrezSoundTranslator.cpp:717 msgid "Saving Channel " msgstr "Speichere Kanal " #: src/backend/CrezSoundTranslator.cpp:798 msgid "Native ReZound" msgstr "Native ReZound" #: src/backend/CStubAction.cpp:46 msgid "Stub Action -- Channel " msgstr "Verstümmelung -- von Kanal " #: src/backend/CStubAction.cpp:101 msgid "Stub" msgstr "Verstümmeln" #: src/backend/Effects/CVariedRepeatEffect.cpp:43 msgid "Varied Repeat -- Channel " msgstr "Variierte Wiederholung -- Kanal " #: src/backend/Effects/CVariedRepeatEffect.cpp:91 msgid "Varied Repeat" msgstr "Variierte Wiederholung" #: src/backend/Effects/CVariedRepeatEffect.cpp:91 msgid "Repeat the Selection Variably According to an LFO" msgstr "Wiederhole die Selektions-Variierung anhand eines LFO" #: src/backend/Effects/CChangeRateEffect.cpp:61 msgid "newLength calulated out of range -- action not taken" msgstr "" "Neu kalkulierte Länge außerhalb des Wertebereichs -- Aktion wird nicht " "ausgeführt" #: src/backend/Effects/CChangeRateEffect.cpp:74 msgid "Changing Rate -- Channel " msgstr "Pegel verändern -- Kanal " #: src/backend/Effects/CChangeRateEffect.cpp:234 msgid "Change Rate" msgstr "Pegel verändern" #: src/backend/Effects/CChangeRateEffect.cpp:253 msgid "Curved Change Rate" msgstr "Kurvenförmige Pegel-Änderung" #: src/backend/Effects/CChangeRateEffect.cpp:253 msgid "Change Rate According to a Curve" msgstr "Pegel-Änderung basierend auf eine Kurve" #: src/backend/Effects/CDelayEffect.cpp:87 msgid "Delay -- Channel " msgstr "Echo -- Kanal " #: src/backend/Effects/CDelayEffect.cpp:138 msgid "Simple Delay (Echo)" msgstr "Einfaches Echo" #: src/backend/Effects/CChangeAmplitudeEffect.cpp:49 msgid "Changing Amplitude -- Channel " msgstr "Amplitude verändern -- Kanal " #: src/backend/Effects/CChangeAmplitudeEffect.cpp:94 msgid "Change Volume" msgstr "Lautstärke verändern" #: src/backend/Effects/CChangeAmplitudeEffect.cpp:114 #: src/frontend_fox/FilterActionDialogs.cpp:543 #: src/frontend_fox/FilterActionDialogs.cpp:566 #: src/frontend_fox/FilterActionDialogs.cpp:589 #: src/frontend_fox/FilterActionDialogs.cpp:620 #: src/frontend_fox/FilterActionDialogs.cpp:653 #: src/frontend_fox/FilterActionDialogs.cpp:684 #: src/frontend_fox/FilterActionDialogs.cpp:715 #: src/frontend_fox/EffectActionDialogs.cpp:48 #: src/frontend_fox/EffectActionDialogs.cpp:64 #: src/frontend_fox/EffectActionDialogs.cpp:173 msgid "Gain" msgstr "Verstärkung" #: src/backend/Effects/CChangeAmplitudeEffect.cpp:133 msgid "Curved Gain" msgstr "Kurvenförmige Verstärkung" #: src/backend/Effects/CChangeAmplitudeEffect.cpp:133 msgid "Change Gain According to a Curve" msgstr "Verändern der Verstärkung basierend auf eine Kurve" #: src/backend/Effects/CQuantizeEffect.cpp:56 msgid "Quantize -- Channel " msgstr "Quantisieren -- Kanal " #: src/backend/Effects/CQuantizeEffect.cpp:102 msgid "Quantize" msgstr "Quantisieren" #: src/backend/Effects/CQuantizeEffect.cpp:102 msgid "Quantize the Number of Possible Sample Levels" msgstr "Quantisiere die Anzahl der möglichen Sample Level" #: src/backend/Effects/CFlangeEffect.cpp:47 msgid " -- _delayTime is negative" msgstr " -- Verzögerungs-Zeit ist negativ" #: src/backend/Effects/CFlangeEffect.cpp:49 msgid " -- flangeLFO.amp is negative" msgstr " -- Flanger-LFO Amplitude ist negativ" #: src/backend/Effects/CFlangeEffect.cpp:69 msgid "Flange -- Channel " msgstr "Flanger -- Kanal " #: src/backend/Effects/CFlangeEffect.cpp:129 msgid "Flange" msgstr "Flanger" #: src/backend/Effects/CDistortionEffect.cpp:32 msgid "Distortion -- Channel " msgstr "Verzerrung -- Kanal " #: src/backend/Effects/CDistortionEffect.cpp:87 msgid "Distortion" msgstr "Verzerrung" #: src/backend/Effects/CReverseEffect.cpp:53 msgid "Reversing -- Channel " msgstr "Umkehrung -- Kanal " #: src/backend/Effects/CReverseEffect.cpp:71 #: src/backend/Effects/CReverseEffect.cpp:94 msgid "Cancelling Reverse -- Channel " msgstr "Umkehrung abbrechen -- Kanal " #: src/backend/Effects/CReverseEffect.cpp:144 #: src/frontend_fox/FilterActionDialogs.cpp:133 msgid "Reverse" msgstr "Umkehrung" #: src/backend/ClibaudiofileSoundTranslator.cpp:88 msgid " -- error opening" msgstr " -- Fehler beim Öffnen" #: src/backend/ClibaudiofileSoundTranslator.cpp:438 msgid "This format does not support saving cues" msgstr "Diese Format unterstützt keine Marker" #: src/backend/main_controls.cpp:157 msgid "Are you sure you want to quit?" msgstr "Wollen Sie wirklich beenden ?" #: src/backend/CJACKSoundPlayer.cpp:125 msgid "Choose Port for Output Channel " msgstr "Wählen Sie den Port für den Ausgabe-Kanal " #: src/backend/CMacroRecorder.cpp:44 msgid "A macro already exists with the name: " msgstr "Ein Makro besteht bereits unter dem Namen: " #: src/backend/CMacroRecorder.cpp:44 msgid "Do you want to overwrite it?" msgstr "Möchten Sie es überschreiben ?" #: src/backend/CMacroRecorder.cpp:66 msgid "Nothing was recorded in the macro: " msgstr "Nichts wurde aufgezeichnet im Makro: " #: src/backend/CMacroRecorder.cpp:97 msgid "The action just performed will not be recorded in your macro." msgstr "" "Die gerade ausgeführte Aktion wird in Deinem Makro nicht aufgezeichnet." #: src/backend/Looping/CAddCuesAction.cpp:58 msgid "The time interval was zero" msgstr "Das Zeit-Intervall war Null" #: src/backend/Looping/CAddCuesAction.cpp:60 msgid "" "The time interval was so small for the selected area that an unlikely " "desired amount of cues would be added" msgstr "" "Das Zeit-Intervall war zu klein für den selektierten Bereich, so daß eine " "nicht gewünschte Anzahl Marker hinzugefügt würde" #: src/backend/Looping/CAddCuesAction.cpp:97 msgid "Add N Cues" msgstr "Füge N Marker hinzu" #: src/backend/Looping/CAddCuesAction.cpp:97 msgid "Add N Cues at Evenly Spaced Intervals" msgstr "Füge N Marker für gleichlange Intervalle hinzu" #: src/backend/Looping/CAddCuesAction.cpp:120 msgid "Add Timed Cues" msgstr "Füge zeitbegrenzte Marker hinzu" #: src/backend/Looping/CAddCuesAction.cpp:120 msgid "Add a Cue Every X Seconds" msgstr "Füge einen Marker alle X Sekzunden hinzu" #: src/backend/Looping/CMakeSymetricAction.cpp:56 msgid "Make Symetric -- Channel " msgstr "Ausgleichen -- Kanal" #: src/backend/Looping/CMakeSymetricAction.cpp:98 msgid "Make Symetric" msgstr "Ausgleichen" #: src/backend/Looping/CMakeSymetricAction.cpp:98 msgid "Make Symetric For Noise Loops" msgstr "Ausgleichen für 'Noise Loops'" #: src/backend/ASoundTranslator.cpp:157 msgid "No handler found to support the format for " msgstr "Keine Routine gefunden zur Unterstützung des Formates " #: src/backend/ASoundTranslator.cpp:157 msgid "Would you like to use a raw format?" msgstr "Möchten Sie das Originalformat benutzen ?" #: src/backend/ASoundTranslator.cpp:161 msgid " -- unhandled format/extension for the filename" msgstr " -- nicht unterstütztes Format/Dateierweiterung für den Dateinamen" #: src/backend/Filters/CConvolutionFilter.cpp:70 msgid " -- cannot read kernel filter file '" msgstr " -- kann Kernel Filter Datei nicht lesen '" #: src/backend/Filters/CConvolutionFilter.cpp:149 msgid "Convolving -- Channel " msgstr "Zusammenfügen - Kanal " #: src/backend/Filters/CConvolutionFilter.cpp:239 #: src/backend/Filters/CArbitraryFIRFilter.cpp:187 #: src/backend/Filters/CMorphingArbitraryFIRFilter.cpp:217 msgid "" " -- feature disabled because the fftw/rfftw library was not installed or " "detected when configure was run" msgstr "" " -- Feature deaktiviert, weil fftw/rfftw nicht installiert ist oder nicht " "erkannt wurde, als 'configure' ausgeführt wurde" #: src/backend/Filters/CConvolutionFilter.cpp:256 msgid "Convolution Filter" msgstr "Zusammenfügen-Filter" #: src/backend/Filters/CConvolutionFilter.cpp:256 msgid "Convolve One Audio File with this One" msgstr "Füge eine Audio-Datei mit dieser zusammen" #: src/backend/Filters/CArbitraryFIRFilter.cpp:92 #: src/backend/Filters/CMorphingArbitraryFIRFilter.cpp:85 msgid "Filtering -- Channel " msgstr "Filtern -- Kanal " #: src/backend/Filters/CArbitraryFIRFilter.cpp:204 msgid "Arbitrary FIR Filter" msgstr "Frei wählbarer FIR-Filter" #: src/backend/Filters/CArbitraryFIRFilter.cpp:204 msgid "" "Finite Impulse Response Filter Given a Custom/User-Defined Frequency Response" msgstr "" "Begrenzter Impuls Resonanz-Filter mit einer Benutzerdefinierten Frequenz-" "Resonanz" #: src/backend/Filters/CSinglePoleFilter.cpp:75 #: src/backend/Filters/CBiquadResFilter.cpp:75 msgid "Lowpass Filter -- Channel " msgstr "Tiefpassfilter -- Kanal " #: src/backend/Filters/CSinglePoleFilter.cpp:88 #: src/backend/Filters/CBiquadResFilter.cpp:88 msgid "Highpass Filter -- Channel " msgstr "Hochpass-Filter -- Kanal " #: src/backend/Filters/CSinglePoleFilter.cpp:101 #: src/backend/Filters/CBiquadResFilter.cpp:101 msgid "Bandpass Filter -- Channel " msgstr "Bandpassfilter -- Kanal " #: src/backend/Filters/CSinglePoleFilter.cpp:114 msgid "Notch Filter -- Channel " msgstr "Sperr-Filter -- Kanal " #: src/backend/Filters/CSinglePoleFilter.cpp:151 msgid "Single Pole Lowpass Filter" msgstr "Einpoliger Tiefpassfilter" #: src/backend/Filters/CSinglePoleFilter.cpp:173 msgid "Single Pole Highpass Filter" msgstr "Einpoliger Hochpassfilter" #: src/backend/Filters/CSinglePoleFilter.cpp:195 msgid "Bandpass Filter" msgstr "Bandpassfilter" #: src/backend/Filters/CSinglePoleFilter.cpp:218 msgid "Notch Filter" msgstr "Sperr-Filter" #: src/backend/Filters/CMorphingArbitraryFIRFilter.cpp:45 msgid " -- sweepLFODesc.amp is negative" msgstr " -- Abtastung der LFO Abfalls-Amplitude ist negativ" #: src/backend/Filters/CMorphingArbitraryFIRFilter.cpp:47 msgid "" " -- freqResponse1 and freqResonse2 do not contain the same number of nodes" msgstr "" " -- freqResponse1 und freqResponse2 haben nicht dieselbe Anzahl an Knoten" #: src/backend/Filters/CMorphingArbitraryFIRFilter.cpp:232 msgid "" "\n" "This action will begin filtering with the first frequency response and morph " "the filter to the second frequency response.\n" "Both frequency reponses must have the same number of points.\n" "The morphing is calculated as each point in the first frequency response " "moving toward the position of the corrisponding point in the second " "frequency response. A point corrisponds to another point if it is in the " "same order left to right.\n" "If 'Use LFO' is not checked, then the filter will use the entire selection's " "time to morph from the first to the second frequency reponse.\n" "If 'Use LFO' is checked, then the morphing will oscillate according to the " "LFO.\n" "A longer Kernel Length will have better filter frequency resolution, but too " "long of a Kernel Length will cause `steps` in the morphing to be audible " "depending on how different the two responses are.\n" msgstr "" "\n" "Diese Aktion startet mit der ersten Frequenzkurve und passt den Filter bis " "zur zweiten Frequenzkurve an.\n" "Beide Frequenzkurven müssen dieselbe Anzahl an Punkten haben.\n" "Die Veränderung wird berechnet, indem jeder Punkt einer Frequenzkurve zur " "Position des korrespondierenden Punktes der zweiten Frequenzkurve verschoben " "wird. Ein Punkt korrespondiert zu einem anderen Punkt, wenn er in derselben " "Reihenfolge, links nach rechts, erscheint.\n" "Wenn 'Benutze LFO' nicht aktiviert ist, wird der Filter die gesamte " "Selektionszeit benutzen, um von der ersten, bis zur zweiten Frequenzkurve zu " "morphen.\n" "Wenn 'Benutze LFO' aktiviert ist, wird das Morphing entsprechend dem LFO " "oszillieren.\n" "Eine längere Kern-Länge wird eine bessere Filter Frequenzauflösung besitzen, " "aber eine zu lange Kern-Länge wird abhängig der beiden Frequenzkurven, " "hörbare Stufen im Morphing erzeugen.\n" #: src/backend/Filters/CMorphingArbitraryFIRFilter.cpp:245 msgid "Morphing Arbitrary FIR Filter" msgstr "Morphing Arbitrary FIR Filter" #: src/backend/Filters/CMorphingArbitraryFIRFilter.cpp:245 msgid "" "Animated Finite Impulse Response Filter Given two Custom/User-Defined " "Frequency Responses" msgstr "" "Animierter Finite Impulse Response Filter basierend auf zwei " "benutzerdefinierten Frequenz-Antworten" #: src/backend/Filters/CBiquadResFilter.cpp:139 msgid "Biquad Resonant Lowpass Filter" msgstr "Biquad Resonanz Tiefpassfilter" #: src/backend/Filters/CBiquadResFilter.cpp:162 msgid "Biquad Resonant Highpass Filter" msgstr "Biquad Resonanz Hochpassfilter" #: src/backend/Filters/CBiquadResFilter.cpp:185 msgid "Biquad Resonant Bandpass Filter" msgstr "Biquad Resonanz Bandpassfilter" #: src/backend/Remaster/CBalanceAction.cpp:57 msgid "Changing Balance" msgstr "Balance verändern" #: src/backend/Remaster/CBalanceAction.cpp:181 #, c-format msgid "" "Strict Balance: -100% means normal A and no B, 0 means normal A and normal " "B, 100% means no A and normal B\n" "1x Balance: -100% means normal A and no B, 0 means half A and half B, 100% " "means no A and normal B\n" "2x Balance: -100% means 2x A and no B, 0 means normal A and normal B, 100% " "means no A and 2x B" msgstr "" "Stikte Balance: -100% meint norm. A und kein B, 0 meint norm. A und norm. B, " "100% meint kein A und norm. B\n" "1x Balance: -100% meint norm. A und kein B, 0 meint halbes A und halbes B, " "100% meint kein A und norm. B\n" "2x Balance: -100% meint 2x A und kein B, 0 meint norm. A und norm. B, 100% " "meint kein A und 2x B" #: src/backend/Remaster/CBalanceAction.cpp:195 #: src/frontend_fox/RemasterActionDialogs.cpp:64 #: src/frontend_fox/RemasterActionDialogs.cpp:142 msgid "Balance" msgstr "Balance" #: src/backend/Remaster/CBalanceAction.cpp:222 msgid "Curved Balance" msgstr "Kurvenförmige Balance" #: src/backend/Remaster/CAdaptiveNormalizeAction.cpp:77 msgid "Adaptive Normalize -- Channel " msgstr "Adaptive Normalisierung -- Kanal " #: src/backend/Remaster/CAdaptiveNormalizeAction.cpp:285 msgid "Adaptive Normalize" msgstr "Adaptives Normalisieren" #: src/backend/Remaster/CCompressorAction.cpp:51 msgid "Compressor -- Channel " msgstr "Kompressor -- Kanal " #: src/backend/Remaster/CCompressorAction.cpp:153 msgid "Compressor " msgstr "Kompressor " #: src/backend/Remaster/CCompressorAction.cpp:276 msgid "" "This is my first attempt at creating a compressor algorithm. I'm not sure " "how it fairs with other 'professional' tools. I really have little " "experience with hardware compressors myself. If you are an experienced " "compressor user and can make intelligent suggestions about how to make this " "one better, then please contact me. Contact information is in the about " "dialog under the file menu" msgstr "" "Dies ist mein erster Versuch, einen Compressor Algorithmus zu entwickeln. " "Ich bin mir nicht sicher, wie gut es im Vergleich zu anderen 'Professional' " "Tools verhält. Ich habe wenig Erfahrung mit Hardware-Kompression. Bist Du " "ein erfahrener Kompressor-Benutzer, dann melde Dich bitte bei mir. Kontakt-" "Info findest Du im About-Dialog im Datei-Menü" #: src/backend/Remaster/CCompressorAction.cpp:282 msgid "Dynamic Range Compressor" msgstr "Dynamic Range Kompressor" #: src/backend/Remaster/CShortenQuietAreasAction.cpp:112 msgid "Shortening Quiet Areas" msgstr "Kürzen stummer Bereiche" #: src/backend/Remaster/CShortenQuietAreasAction.cpp:294 msgid "Shorten Quiet Areas" msgstr "Kürze stumme Bereiche" #: src/backend/Remaster/CShortenQuietAreasAction.cpp:294 msgid "Shorten Quiet Areas with Cues" msgstr "Kürze stumme Bereiche mit Markern" #: src/backend/Remaster/CInvertPhaseAction.cpp:43 msgid "Inverting Phase -- Channel " msgstr "Phase invertieren -- Kanal " #: src/backend/Remaster/CInvertPhaseAction.cpp:57 #: src/backend/Remaster/CInvertPhaseAction.cpp:71 msgid "Cancelling Invert Phase -- Channel " msgstr "Umkehrung abbrechen -- Kanal " #: src/backend/Remaster/CInvertPhaseAction.cpp:116 msgid "Invert Phase" msgstr "Phase invertieren" #: src/backend/Remaster/CInvertPhaseAction.cpp:131 msgid "Invert Phase 180 degrees" msgstr "Phase um 180 Grad invertieren" #: src/backend/Remaster/CRemoveDCAction.cpp:76 msgid "Remove DC Component -- Channel " msgstr "DC Komponente entfernen -- Kanal " #: src/backend/Remaster/CRemoveDCAction.cpp:118 msgid "Remove DC Component" msgstr "DC Komponente entfernen" #: src/backend/Remaster/CRemoveDCAction.cpp:133 msgid "Removes a DC offset from the audio, recentering it around zero" msgstr "" "Entfernt den DC-Offset des Audio-Signals und richtet ihn gegen Null aus" #: src/backend/Remaster/CResampleAction.cpp:63 msgid "Changing Sample Rate -- Channel " msgstr "Sample-Rate ändern -- Kanal " #: src/backend/Remaster/CResampleAction.cpp:115 msgid "Resample" msgstr "Re-Sample" #: src/backend/Remaster/CResampleAction.cpp:115 msgid "Change Sample Rate" msgstr "Sample-Rate ändern" #: src/backend/Remaster/CMonoizeAction.cpp:85 #: src/backend/Remaster/CMonoizeAction.cpp:191 msgid "Monoizing" msgstr "Mono-Spur erzeugen" #: src/backend/Remaster/CMonoizeAction.cpp:289 msgid "Monoize" msgstr "Mono-Spur erzeugen" #: src/backend/Remaster/CMonoizeAction.cpp:302 #: src/frontend_fox/EditActionDialogs.cpp:83 #: src/frontend_fox/EditActionDialogs.cpp:127 #: src/frontend_fox/EditActionDialogs.cpp:133 #: src/frontend_fox/RemasterActionDialogs.cpp:102 #: src/frontend_fox/RemasterActionDialogs.cpp:172 #: src/frontend_fox/RemasterActionDialogs.cpp:201 #: src/frontend_fox/RemasterActionDialogs.cpp:226 #: src/frontend_fox/CPasteChannelsDialog.cpp:124 #: src/frontend_fox/CPasteChannelsDialog.cpp:129 #: src/frontend_fox/CChannelSelectDialog.cpp:67 msgid "Channel " msgstr "Kanal " #: src/backend/Remaster/CUnclipAction.cpp:355 msgid "Unclip (just messing around)" msgstr "Clipping entfernen (experimentell)" #: src/backend/Remaster/CUnclipAction.cpp:355 msgid "" "(NOTE: I was just messing around trying this. It is really useless as is. " "I'll work on it later) Unclip is used to fix by guessing the natural shape " "of a very short\n" "regions in the audio where the peak of a waveform was clipped" msgstr "" "(Anm.: Ich habe nur herumprobiert. Es ist aktuell unbrauchbar. Ich werde " "später daran arbeiten) Unclip wird benutzt, um durch Raten der\n" " natürlichen Kurve, in kurzen Bereichen des Audiosignals, die Spitzen des " "Signals zu glätten" #: src/backend/Remaster/CMarkQuietAreasAction.cpp:157 msgid "Mark Quiet Areas" msgstr "Markiere stumme Bereiche" #: src/backend/Remaster/CMarkQuietAreasAction.cpp:157 msgid "Mark Quiet Areas with Cues" msgstr "Markiere stumme Bereiche mit Markern" #: src/backend/Remaster/CChangePitchAction.cpp:63 msgid "Changing Pitch -- Channel " msgstr "Tonhöhe verändern -- Kanal " #: src/backend/Remaster/CChangePitchAction.cpp:98 msgid "No library was found at configure time to enable pitch changing" msgstr "Es wurde keine Library gefunden, um Tonhöhenveränderung zu ermöglichen" #: src/backend/Remaster/CChangePitchAction.cpp:117 msgid "Change Pitch" msgstr "Tonhöhe verändern" #: src/backend/Remaster/CNormalizeAction.cpp:72 msgid "Analyzing -- Channel " msgstr "Analysieren -- Kanal " #: src/backend/Remaster/CNormalizeAction.cpp:145 #: src/backend/Remaster/CNormalizeAction.cpp:199 msgid "Normalizing -- Channel " msgstr "Normalisieren -- Kanal " #: src/backend/Remaster/CNormalizeAction.cpp:254 msgid "Normalize" msgstr "Normalisieren" #: src/backend/Remaster/CNormalizeAction.cpp:254 msgid "Normalize Amplitude" msgstr "Amplitude Normalisieren" #: src/backend/Remaster/CNormalizeAction.cpp:273 msgid "" "Normalize Amplitude (Some of this technique is experimental, please let me " "know if you approve or disapprove of the result's quality)" msgstr "" "Amplitude Normalisieren (Diese Technik ist zum Teil experimentell. Bitte " "lasst mich wissen, ob die Qualität gut, oder schlecht ist)" #: src/backend/Remaster/CChangeTempoAction.cpp:67 msgid "Changing Tempo -- Channel " msgstr "Tempo verändern -- Kanal " #: src/backend/Remaster/CChangeTempoAction.cpp:116 msgid "No library was found at configure time to enable tempo changing" msgstr "Es wurde keine Library gefunden, um Tempoveränderung zu ermöglichen" #: src/backend/Remaster/CChangeTempoAction.cpp:136 msgid "Change Tempo" msgstr "Tempo verändern" #: src/backend/Remaster/CNoiseGateAction.cpp:74 msgid "Noise Gating -- Channel " msgstr "Noise Gate -- Kanal " #: src/backend/Remaster/CNoiseGateAction.cpp:126 msgid "" "Applies a gain [0,1] to the sound when the level becomes less than the " "threshold.\n" "The gain changes with a velocity according to the attack and release times" msgstr "" "Verstärkt [0,1] den Sound, wenn der Pegel den Schwellenwert unterschreitet.\n" "Die Verstärkung verändert sich basierend auf 'Attack' und 'Release'-Zeiten." #: src/backend/Remaster/CNoiseGateAction.cpp:133 msgid "Noise Gate" msgstr "Noise Gate" #: src/backend/CRunMacroAction.cpp:47 msgid "Run Macro" msgstr "Makro ausführen" #: src/backend/CRunMacroAction.cpp:97 msgid "Macro: " msgstr "Makro: " #: src/backend/CRunMacroAction.cpp:97 msgid "" "Undo all actions that the macro contributed? Else, undo only the last " "action performed from this macro." msgstr "" "Rückgängigmachen aller Aktionen, welche das Makro ausführte ? Sonst wird nur " "die letzte Aktion des Makros rückgängig gemacht." #: src/backend/CRunMacroAction.cpp:120 msgid "Ran Macro" msgstr "Makro ausgeführt" #: src/frontend_fox/CUserNotesDialog.cpp:43 msgid "User Notes" msgstr "Benutzer Anmerkung" #: src/frontend_fox/CRecordMacroDialog.cpp:40 #: src/frontend_fox/CMainWindow.cpp:291 msgid "Record Macro" msgstr "Makro aufzeichnen" #: src/frontend_fox/CRecordMacroDialog.cpp:50 msgid "Macro Name:" msgstr "Makro Name:" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:196 msgid "Use Sound ->\tAdd the Selected Sound as a Source Above" msgstr "Benutze Sound ->\tFüge selektierten Sound der obigen Quelle hinzu" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:197 msgid "New Instance\tCreate a New Instance of the Plugin" msgstr "Neue Instanz\tErzeuge eine neue Instanz des Plugins" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:198 msgid "Default\tGuess at the Desired Routing" msgstr "Standard\tRate das gewünschte Routing" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:199 #: src/frontend_fox/CPasteChannelsDialog.cpp:105 #: src/frontend_fox/CChannelSelectDialog.cpp:71 msgid "Clear" msgstr "Löschen" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:672 msgid "Remove Connection" msgstr "Verbindung löschen" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:817 msgid "Nothing mapped to an output; check the routing" msgstr "Nichts an die Ausgabe angeschlossen; prüfe das Routing" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:947 #: src/frontend_fox/EffectActionDialogs.cpp:243 msgid "Output" msgstr "Output" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1066 msgid "Use " msgstr "Benutze" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1071 #: src/frontend_fox/CMainWindow.cpp:1028 msgid "Selection" msgstr "Selektion" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1072 msgid "All" msgstr "Alles" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1084 msgid "When Data Runs Out ..." msgstr "Wenn Daten ausgehen ..." #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1086 msgid "Silence" msgstr "Stille" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1087 msgid "Loop" msgstr "&Looping" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1452 msgid "Are you sure you want to remove this instance?" msgstr "Wollen Sie wirklich diese Instanz entfernen ?" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1474 msgid "Are you sure you want to remove this source?" msgstr "Wollen Sie wirklich diese Quelle entfernen ?" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1529 msgid "Append New Channel" msgstr "Neuen Kanal anhängen" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1530 msgid "Remove Last Channel" msgstr "Letzten Kanal löschen" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1548 msgid "Cannot exceed maximum number of channels: " msgstr "Kann nicht über maximale Anzahl Kanäle hinausgehen: " #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1560 msgid "Cannot remove the last output channel" msgstr "Kann nicht letzten Augabekanal entfernen" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1566 msgid "Are you sure you want to clear the routing?" msgstr "Wollen Sie wirklich das Routing löschen ?" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1577 msgid "" "Are you sure you want to discard the current routing and guess at the " "desired routing?" msgstr "" "Wollen Sie wirklich das aktuelle Routing abbrechen und das gewünschte " "Routing raten lassen ?" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1744 msgid "" "This source referenced in the preset which was not the action sound when the " "preset was saved is now the action sound. Some connections will likely be " "missing or wrong." msgstr "" "Diese Quelle, referenziert im Preset, die nicht der Action-Sound war, als " "das Preset gespeichert wurde, ist nun der Action-Sound. Einige Verbindungen " "werden voraussichtlich fehlen oder falsch sein." #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1762 #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1779 msgid "When this preset was saved there was a file loaded named:" msgstr "Beim Speichern des Presets gab es eine Datei mit dem Namen:" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1762 msgid "" "This file is currently not loaded.\n" "Would you like to load it now?" msgstr "" "Diese Datei ist aktuell nicht geladen.\n" "Wollen Sie sie jetzt laden ?" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1762 #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1779 msgid "If you do not, then the preset cannot not be fully recreated." msgstr "" "Falls Sie es nicht tun, kann der Preset nicht wiederhergestellt werden." #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1772 #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1789 msgid "The preset cannot be fully recreated." msgstr "Der Preset kann nicht komplett wiederhergestellt werden." #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1779 msgid "" "This file now does not exist.\n" "Would you like to load another file in its place?" msgstr "" "Diese Datei existiert nicht.\n" "Wollen Sie eine andere Datei an dessen Stelle laden ?" #: src/frontend_fox/FXPluginRoutingParamValue.cpp:1799 msgid "" "This file has fewer channels than the one used when the preset was saved. " "It may not be possible to restore some of the connections." msgstr "" "Diese Datei hat weniger Kanäle als die, bei der die Presets gespeichert " "wurden. Es kann sein, daß es einige Verbindungen nicht wiederhergestellt " "werden können." #: src/frontend_fox/CCrossfadeEdgesDialog.cpp:33 msgid "Crossfade Edges Settings" msgstr "Überblendungs-Grenzen Einstellung" #: src/frontend_fox/CCrossfadeEdgesDialog.cpp:38 msgid "Crossfade Start Edge" msgstr "Überblendung Start-Grenze" #: src/frontend_fox/CCrossfadeEdgesDialog.cpp:38 #: src/frontend_fox/CCrossfadeEdgesDialog.cpp:39 msgid "milliseconds" msgstr "Millisekunden" #: src/frontend_fox/CCrossfadeEdgesDialog.cpp:39 msgid "Crossfade Stop Edge" msgstr "Überblendung End-Grenze" #: src/frontend_fox/CCrossfadeEdgesDialog.cpp:42 msgid "Linear Fade" msgstr "Lineare Blendung" #: src/frontend_fox/CCrossfadeEdgesDialog.cpp:43 msgid "Parabolic Fade" msgstr "Parabolische Blendung" #: src/frontend_fox/CCrossfadeEdgesDialog.cpp:44 msgid "Crossfade Fade Method" msgstr "Überblenden Blendungs-Methode" #: src/frontend_fox/CCrossfadeEdgesDialog.cpp:44 msgid "" "Linear will maintain a constant gain of 1.0\n" "Parabolic sounds a bit more natural\n" "For very quick fades (less than 250ms) linear is recommended" msgstr "" "Linear behält eine konstante Verstärkung von 1.0\n" "Parabolisch klingt etwas natürlicher\n" "Für sehr schnelle Blend-Effekte (<250ms) ist Linear vorzuziehen" #: src/frontend_fox/CActionParamDialog.cpp:99 msgid "Explain" msgstr "Erklären" #: src/frontend_fox/CActionParamDialog.cpp:780 msgid "Preset Name" msgstr "Preset-Name" #: src/frontend_fox/CActionParamDialog.cpp:784 msgid "Invalid Preset Name" msgstr "Ungültiger Preset-Name" #: src/frontend_fox/CActionParamDialog.cpp:793 msgid "Preset Name cannot contain" msgstr "Preset-Name darf nicht enhalten" #: src/frontend_fox/CActionParamDialog.cpp:808 msgid "Overwrite Existing Preset" msgstr "Überschreibe vorhandenes Preset" #: src/frontend_fox/CActionParamDialog.cpp:880 msgid "Remove Preset" msgstr "Lösche Preset" #: src/frontend_fox/CActionParamDialog.cpp:928 #: src/frontend_fox/CActionParamDialog.cpp:942 msgid "&Use\tOr Double-Click an Item in the List" msgstr "Ben&utzen\toder Doppel-Klick auf einen Eintrag in der Liste" #: src/frontend_fox/CActionParamDialog.cpp:943 msgid "&Save" msgstr "&Speichern" #: src/frontend_fox/CActionParamDialog.cpp:944 #: src/frontend_fox/CCueListDialog.cpp:77 msgid "&Remove" msgstr "&Löschen" #: src/frontend_fox/CMainWindow.cpp:222 src/frontend_fox/CMainWindow.cpp:856 msgid "Play All Once" msgstr "Alles einmal abspielen" #: src/frontend_fox/CMainWindow.cpp:223 src/frontend_fox/CMainWindow.cpp:858 msgid "Play Selection Once" msgstr "Selektion einmal abspielen" #: src/frontend_fox/CMainWindow.cpp:224 src/frontend_fox/CMainWindow.cpp:860 msgid "Play From Selection Start to End" msgstr "Spiele Selektion vom Start bis Ende" #: src/frontend_fox/CMainWindow.cpp:225 src/frontend_fox/CMainWindow.cpp:859 msgid "Play From Left Edge of Screen to End" msgstr "Spiele von linker Ecke des Bildschirms bis zum Ende" #: src/frontend_fox/CMainWindow.cpp:226 src/frontend_fox/CMainWindow.cpp:857 msgid "Play All Looped" msgstr "Alles looped abspielen" #: src/frontend_fox/CMainWindow.cpp:227 src/frontend_fox/CMainWindow.cpp:861 msgid "Play Selection Looped" msgstr "Selektion looped abspielen" #: src/frontend_fox/CMainWindow.cpp:228 msgid "Play Selection Looped but Skip Most of the Middle" msgstr "Selektion looped abspielen, aber den mittleren Teil überspringen" #: src/frontend_fox/CMainWindow.cpp:229 msgid "Play Selection Looped and Play a Gap Before Repeating" msgstr "" "Selektion looped abspielen, aber einen Ton vor jeder Wiederholung abspielen" #: src/frontend_fox/CMainWindow.cpp:231 src/frontend_fox/CMainWindow.cpp:864 msgid "Stop" msgstr "Stop" #: src/frontend_fox/CMainWindow.cpp:232 src/frontend_fox/CMainWindow.cpp:865 msgid "Pause" msgstr "Pause" #: src/frontend_fox/CMainWindow.cpp:234 src/frontend_fox/CRecordDialog.cpp:64 msgid "Record" msgstr "Aufnahme" #: src/frontend_fox/CMainWindow.cpp:236 src/frontend_fox/CMainWindow.cpp:867 msgid "Jump to Beginning" msgstr "Springe zum Anfang" #: src/frontend_fox/CMainWindow.cpp:237 msgid "Jump to Start Position" msgstr "Springe zur Start-Position" #: src/frontend_fox/CMainWindow.cpp:239 src/frontend_fox/CMainWindow.cpp:869 msgid "Jump to Previous Cue" msgstr "Springe zum letzten Marker" #: src/frontend_fox/CMainWindow.cpp:240 src/frontend_fox/CMainWindow.cpp:870 msgid "Jump to Next Cue" msgstr "Springe zum nächsten Marker" #: src/frontend_fox/CMainWindow.cpp:255 msgid "" "Shuttle Seek While Playing\n" "(right-click to return to middle)" msgstr "" "Shuttle Seek während des Abspielens\n" "(Rechte Maustaste, um zur Mitte zurückzukehren)" #: src/frontend_fox/CMainWindow.cpp:261 msgid "free" msgstr "frei" #: src/frontend_fox/CMainWindow.cpp:261 msgid "spring" msgstr "springen" #: src/frontend_fox/CMainWindow.cpp:262 msgid "Set the Shuttle Wheel to Spring Back to the Middle or Not" msgstr "" "Setze am Shuttle Rad, ob zur Mitte zurückgesprungen werden soll, oder nicht" #: src/frontend_fox/CMainWindow.cpp:266 msgid "Set the Maximum Rate Change of the Shuttle Wheel" msgstr "Setze den maximalen Änderungswert am Shuttle Rad" #: src/frontend_fox/CMainWindow.cpp:274 msgid "Follow Play Position" msgstr "Folge der Spielrichtung" #: src/frontend_fox/CMainWindow.cpp:276 msgid "Clipping Warning" msgstr "Clipping Warnung" #: src/frontend_fox/CMainWindow.cpp:278 msgid "Draw Vertical Cue Positions" msgstr "Zeichne vertikale Marker-Positionen" #: src/frontend_fox/CMainWindow.cpp:283 msgid "" "After Most Actions a Crossfade can be Performed at the Start and Stop \n" "Positions to Give a Smoother Transition in to and out of the Modified " "Selection" msgstr "" "Nach den meisten Aktionen kann eine Überblendung an den Start- und \n" "Stop-Positionen definiert werden, um einen sanfteren Überleitung in, \n" "aus oder zur Selektion zu ermöglichen." #: src/frontend_fox/CMainWindow.cpp:284 msgid "No Crossfade" msgstr "Keine Überblendung" #: src/frontend_fox/CMainWindow.cpp:285 msgid "Crossfade Inner Edges" msgstr "Überblendung an den Innenkanten" #: src/frontend_fox/CMainWindow.cpp:286 msgid "Crossfade Outer Edges" msgstr "Überblendung an den Außenkanten" #: src/frontend_fox/CMainWindow.cpp:288 msgid "Change Crossfade Times" msgstr "Ändern der Überblend-Zeiten" #: src/frontend_fox/CMainWindow.cpp:326 msgid "Name" msgstr "Name" #: src/frontend_fox/CMainWindow.cpp:327 msgid "Path" msgstr "Pfad" #: src/frontend_fox/CMainWindow.cpp:449 msgid "" "You have changed the selected audio file while a macro is being recorded to " "position: " msgstr "" "Du hast die selektierte Audiodatei gewechselt, während ein Makro " "aufgezeichnet wurde, bis zur Position: " #: src/frontend_fox/CMainWindow.cpp:449 msgid "" "Note that when the macro is played back the audio file loaded in the same " "position in the loaded sounds list will be selected at this step in the " "macro." msgstr "" "Bedenke, daß wenn das Makro wiedergegeben wird, die Audiodatei an der selben " "Position in der Liste der geladenen Sounds an diesem Schritt des Makros " "selektiert wird." #: src/frontend_fox/CMainWindow.cpp:828 msgid "&Reopen" msgstr "Erneut öffnen" #: src/frontend_fox/CMainWindow.cpp:835 src/frontend_fox/CAboutDialog.cpp:141 #: src/frontend_fox/CCueListDialog.cpp:74 msgid "&Close" msgstr "S&chließen" #: src/frontend_fox/CMainWindow.cpp:836 msgid "Re&vert" msgstr "Neu Laden" #: src/frontend_fox/CMainWindow.cpp:839 msgid "Record Macro..." msgstr "Makro aufzeichnen..." #: src/frontend_fox/CMainWindow.cpp:841 msgid "User No&tes..." msgstr "Benutzer-Kommen&tare..." #: src/frontend_fox/CMainWindow.cpp:843 msgid "&About ReZound" msgstr "Über ReZound" #: src/frontend_fox/CMainWindow.cpp:844 msgid "&Setup Hotkeys..." msgstr "&Setup Zugriffstasten" #: src/frontend_fox/CMainWindow.cpp:851 msgid "&Quit" msgstr "&Beenden" #: src/frontend_fox/CMainWindow.cpp:855 msgid "Record..." msgstr "Aufnahme..." #: src/frontend_fox/CMainWindow.cpp:862 msgid "Loop Selection but Skip Most of the Middle" msgstr "Loop Selektion aber überspringe das Meiste im Zentrum" #: src/frontend_fox/CMainWindow.cpp:863 msgid "Loop Selection and Play a Gap Before Repeating" msgstr "Loop Selektion und spiele einen Ton bevor wiederholt wird" #: src/frontend_fox/CMainWindow.cpp:868 msgid "Jump to Selection Start" msgstr "Springe zum Selektions-Start" #: src/frontend_fox/CMainWindow.cpp:872 msgid "Shuttle Rewind" msgstr "Shuttle Rewind" #: src/frontend_fox/CMainWindow.cpp:873 msgid "Shuttle Amount" msgstr "Shuttle Menge" #: src/frontend_fox/CMainWindow.cpp:874 msgid "Shuttle Forward" msgstr "Shuttle Vorwärts" #: src/frontend_fox/CMainWindow.cpp:878 msgid "Zoom Out F&ull" msgstr "Zoom Out F&ull" #: src/frontend_fox/CMainWindow.cpp:879 msgid "Zoom &Out" msgstr "Zoom &Out" #: src/frontend_fox/CMainWindow.cpp:880 msgid "Zoom &In" msgstr "Zoom &In" #: src/frontend_fox/CMainWindow.cpp:881 msgid "Zoom &Fit Selection" msgstr "Zoom &Fit Selection" #: src/frontend_fox/CMainWindow.cpp:883 msgid "Find &Start Position" msgstr "Finde &Start Position" #: src/frontend_fox/CMainWindow.cpp:884 msgid "Find Sto&p Position" msgstr "Finde Sto&p Position" #: src/frontend_fox/CMainWindow.cpp:886 msgid "&Redraw" msgstr "&Redraw" #: src/frontend_fox/CMainWindow.cpp:889 src/frontend_fox/CMainWindow.cpp:893 msgid "Toggle &Level Meters" msgstr "Umschalten zur &Lautstärke Anzeige" #: src/frontend_fox/CMainWindow.cpp:890 src/frontend_fox/CMainWindow.cpp:894 msgid "Toggle &Stereo Phase Meters" msgstr "Umschalten zur &Stereo Phasen Anzeige" #: src/frontend_fox/CMainWindow.cpp:891 src/frontend_fox/CMainWindow.cpp:895 msgid "Toggle Frequency &Analyzer" msgstr "Umschalten zum Frequenz &Analysator" #: src/frontend_fox/CMainWindow.cpp:898 msgid "Switch to Previously Viewed File" msgstr "Wechsel zu vorher dargestellter Datei" #: src/frontend_fox/CMainWindow.cpp:899 msgid "Switch to Loaded File 1" msgstr "Wechsel zu geladener Datei 1" #: src/frontend_fox/CMainWindow.cpp:900 msgid "Switch to Loaded File 2" msgstr "Wechsel zu geladener Datei 2" #: src/frontend_fox/CMainWindow.cpp:901 msgid "Switch to Loaded File 3" msgstr "Wechsel zu geladener Datei 3" #: src/frontend_fox/CMainWindow.cpp:902 msgid "Switch to Loaded File 4" msgstr "Wechsel zu geladener Datei 4" #: src/frontend_fox/CMainWindow.cpp:903 msgid "Switch to Loaded File 5" msgstr "Wechsel zu geladener Datei 5" #: src/frontend_fox/CMainWindow.cpp:904 msgid "Switch to Loaded File 6" msgstr "Wechsel zu geladener Datei 6" #: src/frontend_fox/CMainWindow.cpp:905 msgid "Switch to Loaded File 7" msgstr "Wechsel zu geladener Datei 7" #: src/frontend_fox/CMainWindow.cpp:906 msgid "Switch to Loaded File 8" msgstr "Wechsel zu geladener Datei 8" #: src/frontend_fox/CMainWindow.cpp:907 msgid "Switch to Loaded File 9" msgstr "Wechsel zu geladener Datei 9" #: src/frontend_fox/CMainWindow.cpp:908 msgid "Switch to Loaded File 10" msgstr "Anzeigen geladener Datei 10" #: src/frontend_fox/CMainWindow.cpp:912 msgid "Undo" msgstr "Rückgängig" #: src/frontend_fox/CMainWindow.cpp:913 msgid "Clear Undo History" msgstr "Lösche Rückgängig-Historie" #: src/frontend_fox/CMainWindow.cpp:915 msgid "&Recent Actions" msgstr "Letzte Aktionen" #: src/frontend_fox/CMainWindow.cpp:1026 msgid "&File" msgstr "&Datei" #: src/frontend_fox/CMainWindow.cpp:1027 #: src/frontend_fox/CCueListDialog.cpp:78 msgid "&Edit" msgstr "Bearbeiten" #: src/frontend_fox/CMainWindow.cpp:1029 msgid "&View" msgstr "Ansicht" #: src/frontend_fox/CMainWindow.cpp:1030 msgid "&Control" msgstr "Steuerung" #: src/frontend_fox/CMainWindow.cpp:1031 msgid "Effec&ts" msgstr "Effekte" #: src/frontend_fox/CMainWindow.cpp:1032 msgid "&Looping" msgstr "&Looping" #: src/frontend_fox/CMainWindow.cpp:1033 msgid "F&ilters" msgstr "F&ilter" #: src/frontend_fox/CMainWindow.cpp:1034 msgid "&Remaster" msgstr "&Remaster" #: src/frontend_fox/CMainWindow.cpp:1035 msgid "&Generate" msgstr "Erzeugen" #: src/frontend_fox/CMainWindow.cpp:1193 msgid "No LADSPA Plugins Found" msgstr "Keine LADSPA Plugins gefunden" #: src/frontend_fox/CMainWindow.cpp:1195 msgid "Like PATH, set LADSPA_PATH to point" msgstr "Wie PATH, muß auch LADSPA_PATH gesetzt sein" #: src/frontend_fox/CMainWindow.cpp:1196 msgid "to a directory(s) containing LADSPA" msgstr "zu einem Verzeichnis(se) mit LADSPA" #: src/frontend_fox/CMainWindow.cpp:1197 msgid "plugin .so file at least once. Or" msgstr "Plugin .so Datei mindestens einmal. Oder" #: src/frontend_fox/CMainWindow.cpp:1198 msgid "edit the value in ~/.rezound/registry.dat" msgstr "Editiere den Wert in ~/.rezound/registry.dat" #: src/frontend_fox/CMainWindow.cpp:1421 msgid "Cannot close a file while recording a macro" msgstr "Kann keine Datei schließen, solange ein Makro aufgezeichnet wird" #: src/frontend_fox/CMainWindow.cpp:1430 msgid "Cannot revert a file while recording a macro" msgstr "" "Kann keine Datei wiederherstellen, solange ein Makro aufgezeichnet wird" #: src/frontend_fox/CMainWindow.cpp:1556 msgid "Cannot record audio while recording a macro" msgstr "Kann kein Audio aufnehmen, solange ein Makro aufgezeichnet wird" #: src/frontend_fox/CMainWindow.cpp:1700 src/frontend_fox/CMainWindow.cpp:1734 #: src/frontend_fox/CMainWindow.cpp:1794 src/frontend_fox/CMainWindow.cpp:1832 #: src/frontend_fox/CMainWindow.cpp:1833 #: src/frontend_fox/RemasterActionDialogs.cpp:598 msgid "semitones" msgstr "Halbtöne" #: src/frontend_fox/CAboutDialog.cpp:43 msgid "About ReZound" msgstr "Über ReZound" #: src/frontend_fox/CAboutDialog.cpp:69 msgid "Please Read" msgstr "Bitte lesen" #: src/frontend_fox/CAboutDialog.cpp:73 msgid "" "*** PLEASE READ ***\n" "\n" " Welcome to this beta stage release of ReZound. The primary goal for this " "beta stage is to get feedback on what problems ReZound has running as well " "as adding a (not-so-well) defined list of features that I would like ReZound " "to have before calling it '1.0'. Please report any problems you may have " "with the configure/compiling/running process to me through the bug report " "link on the next tab in this about dialog.\n" " Features are growing. I plan eventually to write a brief document on how " "to implement new actions/effects/edits. I specifically designed ReZound so " "that it would be easy to create new actions.\n" " If you have any suggestions about the UI or other functionality then " "please report them also to me through either the support link or feature " "request link on the next tab. Thank you for giving ReZound a try. I hope " "your experience is a good one and that you will find this application useful " "when you need to edit audio as I find it useful.\n" "\n" " -- Davy\n" "\t\t" msgstr "" "*** BITTE LESEN ***\n" "\n" " Wilkommen zu dieser Beta-Version von ReZound. Das Hauptziel dieser Beta " "ist, Rückmeldungen zu Problemen, als auch Sammeln der Feature-Liste für das " "1.0-Release zu ermöglichen. Bitte meldet alle Eure Probleme, die Ihr beim " "Konfigurieren, kompilieren und zur Laufzeit findet, durch den Bug-Report " "Link auf der nächsten Tabpage dieses Dialoges.\n" " Features werden mehr. Ich plane eventuell ein ausführliches Dokument zu " "schreiben, wie Aktionen, Effekte und Edits implementiert werden. Ich habe " "ReZound so designed, daß es einfach ist, neue Aktionen zu erstellen.\n" " Solltet Ihr Vorschläge zum UserInterface oder andere Funktionalität " "haben, dann meldet sie mir entweder über den Support-Link oder den Feature-" "Request Link auf der nächsten Tabpage. Danke, daß Du ReZound ausprobiert " "hast. Ich hoffe, daß Deine Erfahrungen gute waren und daß Du dieses Programm " "für so nützlich hältst, wie ich es finde, um Audio-Dateien zu editieren.\n" "\n" " -- Davy\n" "\t\t" #: src/frontend_fox/CAboutDialog.cpp:91 msgid "About" msgstr "Über" #: src/frontend_fox/CAboutDialog.cpp:95 msgid "Author" msgstr "Autor" #: src/frontend_fox/CAboutDialog.cpp:96 msgid "Original Autoconfiscation" msgstr "Ursprüngliche Programm-Idee" #: src/frontend_fox/CAboutDialog.cpp:97 msgid "Additional Programming" msgstr "Zusätzliche Programmierer" #: src/frontend_fox/CAboutDialog.cpp:98 msgid "Artistic Consultant" msgstr "Gestalterische Beratung" #: src/frontend_fox/CAboutDialog.cpp:99 msgid "Home Page" msgstr "Home Page" #: src/frontend_fox/CAboutDialog.cpp:100 msgid "Mailing List" msgstr "Mailing List" #: src/frontend_fox/CAboutDialog.cpp:101 msgid "Bug Reports" msgstr "Bug Reports" #: src/frontend_fox/CAboutDialog.cpp:102 msgid "Support Requests" msgstr "Support Requests" #: src/frontend_fox/CAboutDialog.cpp:103 msgid "Feature Requests" msgstr "Feature Requests" #: src/frontend_fox/CAboutDialog.cpp:105 msgid "Also Please Read" msgstr "Bitte ebenfalls lesen" #: src/frontend_fox/CAboutDialog.cpp:108 msgid "Thanks To" msgstr "Danke an" #: src/frontend_fox/CAboutDialog.cpp:112 msgid "Russian Translation" msgstr "Russische Übersetzung" #: src/frontend_fox/CAboutDialog.cpp:113 msgid "German Translation" msgstr "Deutsche Übersetzung" #: src/frontend_fox/CAboutDialog.cpp:114 msgid "Spanish Translation" msgstr "Spanische Übersetzung" #: src/frontend_fox/CAboutDialog.cpp:115 msgid "Finnish Translation" msgstr "Finnische Übersetzung" #: src/frontend_fox/CAboutDialog.cpp:116 #, fuzzy msgid "French Translation" msgstr "Finnische Übersetzung" #: src/frontend_fox/CAboutDialog.cpp:117 msgid "Testing/Porting" msgstr "Testing/Portierung" #: src/frontend_fox/CAboutDialog.cpp:118 src/frontend_fox/CAboutDialog.cpp:119 #: src/frontend_fox/CAboutDialog.cpp:120 src/frontend_fox/CAboutDialog.cpp:121 #: src/frontend_fox/CAboutDialog.cpp:122 src/frontend_fox/CAboutDialog.cpp:125 #: src/frontend_fox/CAboutDialog.cpp:127 src/frontend_fox/CAboutDialog.cpp:128 #: src/frontend_fox/CAboutDialog.cpp:129 src/frontend_fox/CAboutDialog.cpp:130 msgid "Bug Finding" msgstr "Bugs suchen" #: src/frontend_fox/CAboutDialog.cpp:123 msgid "Feature Suggestions" msgstr "Feature Vorschläge" #: src/frontend_fox/CAboutDialog.cpp:124 msgid "Bug Finding/Fixing" msgstr "Bugs suchen/fixen" #: src/frontend_fox/CAboutDialog.cpp:126 msgid "Semitones Shuttle Wheel Feature Patch" msgstr "Halbton Shuttle Rad Feature Patch" #: src/frontend_fox/CAboutDialog.cpp:133 msgid "License" msgstr "Lizenz" #: src/frontend_fox/FilterActionDialogs.cpp:64 #: src/frontend_fox/FilterActionDialogs.cpp:257 #: src/frontend_fox/FilterActionDialogs.cpp:393 msgid "Wet/Dry Mix" msgstr "Nasse/Trockene Mischung" #: src/frontend_fox/FilterActionDialogs.cpp:72 msgid "Input Lowpass" msgstr "Input Tiefpass" #: src/frontend_fox/FilterActionDialogs.cpp:80 #: src/frontend_fox/EffectActionDialogs.cpp:200 #: src/frontend_fox/RemasterActionDialogs.cpp:328 msgid "Input Gain" msgstr "Input Gain" #: src/frontend_fox/FilterActionDialogs.cpp:88 #: src/frontend_fox/EffectActionDialogs.cpp:219 #: src/frontend_fox/RemasterActionDialogs.cpp:336 msgid "Output Gain" msgstr "Output Gain" #: src/frontend_fox/FilterActionDialogs.cpp:96 msgid "Predelay" msgstr "Predelay" #: src/frontend_fox/FilterActionDialogs.cpp:105 msgid "Filter Kernel" msgstr "Filter-Kernel" #: src/frontend_fox/FilterActionDialogs.cpp:105 msgid "The Audio File to Use as the Filter Kernel" msgstr "Die Audio-Datei, welche als Filter-Kernel benutzt werden soll" #: src/frontend_fox/FilterActionDialogs.cpp:109 msgid "FK Gain" msgstr "FK Gain" #: src/frontend_fox/FilterActionDialogs.cpp:117 msgid "FK Lowpass" msgstr "FK Tiefpass" #: src/frontend_fox/FilterActionDialogs.cpp:126 msgid "FK Rate" msgstr "FK Rate" #: src/frontend_fox/FilterActionDialogs.cpp:135 msgid "Wrap Decay back to Beginning" msgstr "Wrap Decay bis zurück zum Anfang" #: src/frontend_fox/FilterActionDialogs.cpp:266 msgid "Frequency Response" msgstr "Frequenz-Resonanz" #: src/frontend_fox/FilterActionDialogs.cpp:267 #: src/frontend_fox/FilterActionDialogs.cpp:361 #: src/frontend_fox/FilterActionDialogs.cpp:378 #: src/frontend_fox/GenerateActionDialogs.cpp:130 #: src/frontend_fox/FXLFOParamValue.cpp:69 msgid "Frequency" msgstr "Frequenz" #: src/frontend_fox/FilterActionDialogs.cpp:270 #: src/frontend_fox/FilterActionDialogs.cpp:364 #: src/frontend_fox/FilterActionDialogs.cpp:381 msgid "Change" msgstr "Änderung" #: src/frontend_fox/FilterActionDialogs.cpp:278 #: src/frontend_fox/FilterActionDialogs.cpp:441 msgid "Base Frequency" msgstr "Basis Frequenz" #: src/frontend_fox/FilterActionDialogs.cpp:283 #: src/frontend_fox/FilterActionDialogs.cpp:446 msgid "" "This Sets the Lowest Frequency Displayed on the Graph.\n" "This is the Frequency of the First Octave." msgstr "" "Hier wird die tiefste dargestellte Frequenz auf dem Graphen gesetzt.\n" "Dies ist die Frequenz der ersten Oktave." #: src/frontend_fox/FilterActionDialogs.cpp:289 #: src/frontend_fox/FilterActionDialogs.cpp:452 msgid "Number of Octaves" msgstr "Anzahl Oktaven" #: src/frontend_fox/FilterActionDialogs.cpp:294 #: src/frontend_fox/FilterActionDialogs.cpp:457 msgid "" "This Sets the Number of Octaves Displayed on the Graph.\n" "But Note that no Frequency Higher than Half of the Sound's Sampling Rate can " "be Affected Since it Cannot Contain a Frequency Higher than That." msgstr "" "Hier wird die Anzahl im Graphen dargestellter Oktaven gesetzt.\n" "Beachten Sie, daß keine Frequenz höher als die Hälfte der Sample-Rate des " "Sounds sein darf, da das Sample keine höhere Frequenz beinhalten darf." #: src/frontend_fox/FilterActionDialogs.cpp:301 #: src/frontend_fox/FilterActionDialogs.cpp:422 msgid "Kernel Length" msgstr "Kernel-Länge" #: src/frontend_fox/FilterActionDialogs.cpp:307 #: src/frontend_fox/FilterActionDialogs.cpp:428 msgid "" "This is the Size of the Filter Kernel Computed (in samples) From Your Curve " "to be Convolved with the Audio" msgstr "" "Dies ist die aus Ihrem Sample (in Samples) errechnete Filter-Kernel Größe, " "welche in die Audio-Daten hineingerechnet wird" #: src/frontend_fox/FilterActionDialogs.cpp:310 #: src/frontend_fox/FilterActionDialogs.cpp:432 msgid "Undelay" msgstr "Undelay" #: src/frontend_fox/FilterActionDialogs.cpp:312 #: src/frontend_fox/FilterActionDialogs.cpp:434 msgid "This Counteracts the Delay Side-Effect of Custom FIR Filters" msgstr "Dies soll Delay Side-Effekten des Custom FIR Filters entgegenwirken" #: src/frontend_fox/FilterActionDialogs.cpp:360 msgid "Frequency Response 1" msgstr "Frequenzkurve 1" #: src/frontend_fox/FilterActionDialogs.cpp:372 msgid "Copy Response 1 to Response 2" msgstr "Kopiere Kurve 1 nach Kurve 2" #: src/frontend_fox/FilterActionDialogs.cpp:373 msgid "Swap Response 1 and Response 2" msgstr "Tausche Kurve 1 mit Kurve 2" #: src/frontend_fox/FilterActionDialogs.cpp:374 msgid "Copy Response 2 to Response 1" msgstr "Kopiere Kurve 2 nach Kurve 1" #: src/frontend_fox/FilterActionDialogs.cpp:377 msgid "Frequency Response 2" msgstr "Frequenzkurve 2" #: src/frontend_fox/FilterActionDialogs.cpp:403 msgid "Use LFO" msgstr "Benutze LFO" #: src/frontend_fox/FilterActionDialogs.cpp:410 msgid "Sweep LFO" msgstr "Tausche LFO" #: src/frontend_fox/FilterActionDialogs.cpp:516 msgid "" "Frequency Response 1 and Frequency Response 2 must contain the same number " "of nodes" msgstr "" "Frequenzkurve 1 und Frequenzkurve 2 mussen die gleiche Anzahl an Knoten " "enthalten" #: src/frontend_fox/FilterActionDialogs.cpp:551 #: src/frontend_fox/FilterActionDialogs.cpp:574 #: src/frontend_fox/FilterActionDialogs.cpp:661 #: src/frontend_fox/FilterActionDialogs.cpp:692 msgid "Cutoff Frequency" msgstr "Abschaltungs-Frequenz" #: src/frontend_fox/FilterActionDialogs.cpp:597 #: src/frontend_fox/FilterActionDialogs.cpp:628 #: src/frontend_fox/FilterActionDialogs.cpp:723 msgid "Center Frequency" msgstr "Mitten-Frequenz" #: src/frontend_fox/FilterActionDialogs.cpp:605 #: src/frontend_fox/FilterActionDialogs.cpp:636 msgid "Band Width" msgstr "Bandbreite" #: src/frontend_fox/FilterActionDialogs.cpp:669 #: src/frontend_fox/FilterActionDialogs.cpp:700 #: src/frontend_fox/FilterActionDialogs.cpp:731 msgid "Resonance" msgstr "Resonanz" #: src/frontend_fox/FXRezWaveView.cpp:511 #: src/frontend_fox/FXRezWaveView.cpp:516 msgid "Set Start Position to Cue" msgstr "Setze Start-Position zum Marker" #: src/frontend_fox/FXRezWaveView.cpp:513 #: src/frontend_fox/FXRezWaveView.cpp:517 msgid "Set Stop Position to Cue" msgstr "Setze Stop-Position zum Marker" #: src/frontend_fox/FXRezWaveView.cpp:521 msgid "&Edit Cue" msgstr "Marker bearbeiten" #: src/frontend_fox/FXRezWaveView.cpp:522 msgid "&Remove Cue" msgstr "Marker Entfernen" #: src/frontend_fox/FXRezWaveView.cpp:524 #: src/frontend_fox/FXRezWaveView.cpp:543 msgid "Show Cues &List" msgstr "Marker-Liste zeigen" #: src/frontend_fox/FXRezWaveView.cpp:536 msgid "Center Start Position" msgstr "Zentriere Start-Position" #: src/frontend_fox/FXRezWaveView.cpp:537 msgid "Center Stop Position" msgstr "Zentriere Stop-Position" #: src/frontend_fox/FXRezWaveView.cpp:539 msgid "Add Cue at This Position" msgstr "Marker an dieser Position hinzufügen" #: src/frontend_fox/FXRezWaveView.cpp:540 msgid "Add Cue at Start Position" msgstr "Marker an Start-Position hinzufügen" #: src/frontend_fox/FXRezWaveView.cpp:541 msgid "Add Cue at Stop Position" msgstr "Marker an Stop-Position hinzufügen" #: src/frontend_fox/CMacroActionParamsDialog.cpp:47 msgid "Macro Action Parameters" msgstr "Makro Aktions Parameter" #: src/frontend_fox/CMacroActionParamsDialog.cpp:62 msgid "When the Macro is Played Back and This Action is to be Performed..." msgstr "Wenn das Makro abgespielt und diese Aktion ausgeführt wird..." #: src/frontend_fox/CMacroActionParamsDialog.cpp:71 msgid "Set the Start Position..." msgstr "Setze die Start-Position" #: src/frontend_fox/CMacroActionParamsDialog.cpp:72 #: src/frontend_fox/CMacroActionParamsDialog.cpp:82 msgid "Same Proportionate Time" msgstr "Dieselbe anteilsmäßige Zeit" #: src/frontend_fox/CMacroActionParamsDialog.cpp:73 #: src/frontend_fox/CMacroActionParamsDialog.cpp:83 msgid "Same Absolute Time From the Beginning of the Audio File" msgstr "Dieselbe absolute Zeit vom Anfang der Audio-Datei" #: src/frontend_fox/CMacroActionParamsDialog.cpp:74 #: src/frontend_fox/CMacroActionParamsDialog.cpp:84 msgid "Same Absolute Time From the End of the Audio File" msgstr "Dieselbe absolute Zeit vom Ende der Audio-Datei" #: src/frontend_fox/CMacroActionParamsDialog.cpp:75 msgid "Same Absolute Time Before the Stop Position" msgstr "Dieselbe absolute Zeit vor der Stop-Position" #: src/frontend_fox/CMacroActionParamsDialog.cpp:76 msgid "Same Proportionate Time Before the Stop Position" msgstr "Dieselbe anteilsmäßige Zeit vor der Stop-Position" #: src/frontend_fox/CMacroActionParamsDialog.cpp:77 #: src/frontend_fox/CMacroActionParamsDialog.cpp:87 msgid "Same Cue Name" msgstr "Derselbe Marker-Name" #: src/frontend_fox/CMacroActionParamsDialog.cpp:78 #: src/frontend_fox/CMacroActionParamsDialog.cpp:88 msgid "Leave in the Same Position From Previous Action" msgstr "Halte es an derselben Stelle, wie bei vorhergehender Aktion" #: src/frontend_fox/CMacroActionParamsDialog.cpp:81 msgid "Set the Stop Position..." msgstr "Setze die Stop-Position" #: src/frontend_fox/CMacroActionParamsDialog.cpp:85 msgid "Same Absolute Time After the Start Position" msgstr "Dieselbe absolute Zeit nach der Start-Position" #: src/frontend_fox/CMacroActionParamsDialog.cpp:86 msgid "Same Proportionate Time After the Start Position" msgstr "Dieselbe anteilsmäßige Zeit nach der Start-Position" #: src/frontend_fox/CMacroActionParamsDialog.cpp:201 msgid "" "The positioning of the start and stop positions cannot be relative to each " "other." msgstr "" "Die Positionierung der Start- und Stoppositionen können nicht voneinander " "abhängen." #: src/frontend_fox/CJACKPortChoiceDialog.cpp:40 msgid "JACK Port Selection" msgstr "JACK Port Auswahl" #: src/frontend_fox/EffectActionDialogs.cpp:33 msgid "Volume Change" msgstr "Volume Change" #: src/frontend_fox/EffectActionDialogs.cpp:63 msgid "Gain Curve" msgstr "Gain-Kurve" #: src/frontend_fox/EffectActionDialogs.cpp:80 msgid "Rate Change" msgstr "Rate Change" #: src/frontend_fox/EffectActionDialogs.cpp:93 msgid "Rate Curve" msgstr "Rate Curve" #: src/frontend_fox/EffectActionDialogs.cpp:94 msgid "Rate" msgstr "Rate" #: src/frontend_fox/EffectActionDialogs.cpp:112 #: src/frontend_fox/EffectActionDialogs.cpp:165 msgid "Delay" msgstr "Echo" #: src/frontend_fox/EffectActionDialogs.cpp:120 msgid "Wet Gain" msgstr "Wet Gain" #: src/frontend_fox/EffectActionDialogs.cpp:128 msgid "Dry Gain" msgstr "Dry Gain" #: src/frontend_fox/EffectActionDialogs.cpp:136 msgid "Flange LFO" msgstr "Flanger LFO" #: src/frontend_fox/EffectActionDialogs.cpp:138 msgid "LFO Depth" msgstr "LFO Tiefe" #: src/frontend_fox/EffectActionDialogs.cpp:146 #: src/frontend_fox/EffectActionDialogs.cpp:181 msgid "Feedback" msgstr "Feedback" #: src/frontend_fox/EffectActionDialogs.cpp:210 msgid "Quantum Count" msgstr "Quantum Count" #: src/frontend_fox/EffectActionDialogs.cpp:216 msgid "The Number of Possible Sample Values Above Zero" msgstr "Die Anzahl der möglichen Sample-Werte größer Null" #: src/frontend_fox/EffectActionDialogs.cpp:239 msgid "Curve" msgstr "Kurve" #: src/frontend_fox/EffectActionDialogs.cpp:240 msgid "Input" msgstr "Input" #: src/frontend_fox/EffectActionDialogs.cpp:261 msgid "LFO" msgstr "LFO" #: src/frontend_fox/EffectActionDialogs.cpp:271 msgid "Time" msgstr "Zeit" #: src/frontend_fox/FileActionDialogs.cpp:127 msgid "Save to Directory" msgstr "Speichern in Verzeichnis" #: src/frontend_fox/FileActionDialogs.cpp:127 msgid "All the files will be saved into this directory" msgstr "Alle Dateien werden in dieses Verzeichnis gespeichert" #: src/frontend_fox/FileActionDialogs.cpp:128 msgid "Filename Prefix" msgstr "Dateinamen-Prefix" #: src/frontend_fox/FileActionDialogs.cpp:128 msgid "Part#" msgstr "Teil#" #: src/frontend_fox/FileActionDialogs.cpp:128 msgid "This will be added to the front of the filename" msgstr "Dies wird vor den Dateinamen hinzugefügt" #: src/frontend_fox/FileActionDialogs.cpp:129 msgid "Filename Suffix" msgstr "Dateinamen Suffix" #: src/frontend_fox/FileActionDialogs.cpp:129 msgid "This will be added to the end of the filename" msgstr "Dies wird ans Ende des Dateinamens hinzugefügt" #: src/frontend_fox/FileActionDialogs.cpp:130 msgid "Format" msgstr "Format" #: src/frontend_fox/FileActionDialogs.cpp:130 msgid "The format to save each segment as" msgstr "Das Format in dem jedes Segment gespeichert wird" #: src/frontend_fox/FileActionDialogs.cpp:131 msgid "Segment Number Start" msgstr "Segmentzähler-Beginn" #: src/frontend_fox/FileActionDialogs.cpp:131 msgid "" "The Number to Start With When Substituting the Track Number For '#' in the " "Filenames" msgstr "" "Dies ist der Zähler, mit dem die Spur-Nummer durch '#' im Dateinamen " "repräsentiert wird" #: src/frontend_fox/FileActionDialogs.cpp:132 msgid "Open Saved Segments" msgstr "Öffne gespeicherte Segmente" #: src/frontend_fox/FileActionDialogs.cpp:132 msgid "Open the Segments After Saving Them" msgstr "Öffne die Segmente, nachdem sie gespeichert wurden" #: src/frontend_fox/FileActionDialogs.cpp:134 #: src/frontend_fox/FileActionDialogs.cpp:183 msgid "Entire File" msgstr "auf die ganze Datei" #: src/frontend_fox/FileActionDialogs.cpp:135 #: src/frontend_fox/FileActionDialogs.cpp:184 msgid "Selection Only" msgstr "auf die Selektion" #: src/frontend_fox/FileActionDialogs.cpp:136 #: src/frontend_fox/FileActionDialogs.cpp:185 msgid "Applies to" msgstr "Trifft zu" #: src/frontend_fox/FileActionDialogs.cpp:137 msgid "Prompt Only Once for Save Parameters" msgstr "Nur einmal fragen für Speichern-Parameter" #: src/frontend_fox/FileActionDialogs.cpp:137 msgid "" "Some formats require parameters from the user (i.e. compression type, audio " "format, etc). Checking this checkbox will make it only prompt on the first " "file if necessary. All other saved files will use the previous parameters " "if possible." msgstr "" "Manche Formate benötigen das Setzen von Parametern (z.B. Kompressionstyp, " "Audio-Format, etc.). Beim Aktivieren dieser Checkbox wird nur einmal für die " "erste Datei nachgefragt, sofern notwendig. Alle anderen gespeicherten " "Dateien werden die vorher gesetzten Parameter behalten, soweit möglich." #: src/frontend_fox/FileActionDialogs.cpp:165 msgid "Temp Space Directory" msgstr "Temporärverzeichnis" #: src/frontend_fox/FileActionDialogs.cpp:165 msgid "" "A temporary file for burning will be placed in this location. Enough space " "will be needed for CD quality audio of the length of the audio to be burned " "to the CD" msgstr "" "Eine Temporärdatei zum Brennen wird an diesem Ort abgelegt. Es wird genügend " "Platz zum Seichern für Audio-Daten in CD-Qualität benötigt, um daraus eine " "CD produzieren zu können" #: src/frontend_fox/FileActionDialogs.cpp:168 msgid "Path to cdrdao" msgstr "Pfad zu cdrdao" #: src/frontend_fox/FileActionDialogs.cpp:173 msgid "Burn Speed" msgstr "Brenn-Geschw." #: src/frontend_fox/FileActionDialogs.cpp:179 msgid "Gap Between Tracks" msgstr "Abstand zw. Tracks" #: src/frontend_fox/FileActionDialogs.cpp:179 msgid "The Gap of Silence to Place Between Each Track" msgstr "Die Länge der Stille, welche zwischen den Tracks eingefügt werden soll" #: src/frontend_fox/FileActionDialogs.cpp:189 msgid "Device" msgstr "Gerät" #: src/frontend_fox/FileActionDialogs.cpp:190 msgid "Detect" msgstr "Erkennen" #: src/frontend_fox/FileActionDialogs.cpp:191 msgid "" "In linux >2.6, scanbus may not work and it may be\n" "necessary to specify: for example: ATAPI:0,0,0" msgstr "" "In Linux >2.6 könnte scanbus nicht richtig arbeiten.\n" "Daher sollte man definieren: z.B. ATAPI:0,0,0" #: src/frontend_fox/FileActionDialogs.cpp:192 msgid "Also, cdrdao-1.1.9 has much better drive support." msgstr "Zudem hat cdrdao-1.1.9 eine bessere Laufwerksunterstützung." #: src/frontend_fox/FileActionDialogs.cpp:194 msgid "Extra cdrdao Options" msgstr "Extra cdrdao Optionen" #: src/frontend_fox/FileActionDialogs.cpp:195 msgid "Simulate Burn Only" msgstr "Brenn-Simulation" #: src/frontend_fox/FileActionDialogs.cpp:195 msgid "Don't Turn on Burn Laser" msgstr "Laser nicht einschalten" #: src/frontend_fox/FileActionDialogs.cpp:230 msgid "Macro Name" msgstr "Makro Name" #: src/frontend_fox/FileActionDialogs.cpp:231 msgid "Remove Macro" msgstr "Lösche Makro" #: src/frontend_fox/FileActionDialogs.cpp:246 msgid "Are you sure you want to delete the macro: " msgstr "Wollen Sie wirklich das Makro löschen ?: " #: src/frontend_fox/CSoundWindow.cpp:151 msgid "Fit\tZoom to Fit Selection" msgstr "Anpassen\tZoom, um in Selektion zu passen" #: src/frontend_fox/CSoundWindow.cpp:152 src/frontend_fox/CSoundWindow.cpp:160 msgid "Zoom Out Full" msgstr "Maximal Heraus-Zoomen" #: src/frontend_fox/CSoundWindow.cpp:154 src/frontend_fox/CSoundWindow.cpp:158 msgid "Zoom In Full" msgstr "Maximal Hinein-Zoomen" #: src/frontend_fox/CSoundWindow.cpp:156 msgid "Horizontally and Vertically Zoom Out Full" msgstr "Horizontal und Vertikal bis zum Maximum Heraus-Zoomen" #: src/frontend_fox/CSoundWindow.cpp:162 msgid "M\tMute Channels" msgstr "M\tKanäle Stummschalten" #: src/frontend_fox/CSoundWindow.cpp:163 msgid "" "!\tInvert the Muted State of Each Channel or (right click) Unmute All " "Channels" msgstr "" "!\tInvertier die Stummschaltung jedes Kanals oder (Rechts-Klick) reaktiviere " "alle Kanäle" #: src/frontend_fox/CSoundWindow.cpp:201 src/frontend_fox/CSoundWindow.cpp:202 msgid "Playing:" msgstr "Spielt:" #: src/frontend_fox/CSoundWindow.cpp:204 src/frontend_fox/CSoundWindow.cpp:205 msgid "Paused:" msgstr "Pause:" #: src/frontend_fox/CSoundWindow.cpp:209 msgid "Sample Rate; " msgstr "Sample Rate;" #: src/frontend_fox/CSoundWindow.cpp:211 msgid "Channel Count: " msgstr "Anzahl Kanäle: " #: src/frontend_fox/CSoundWindow.cpp:216 msgid "Audio Size; " msgstr "Audio Größe; " #: src/frontend_fox/CSoundWindow.cpp:218 src/frontend_fox/CSoundWindow.cpp:466 msgid "Working File: " msgstr "Arbeits-Datei: " #: src/frontend_fox/CSoundWindow.cpp:224 msgid "Total: " msgstr "Gesamt: " #: src/frontend_fox/CSoundWindow.cpp:235 msgid "Selection: " msgstr "Selektion: " #: src/frontend_fox/CSoundWindow.cpp:250 msgid "Increase/Decrease Start Position by One Sample" msgstr "Vergrößere/Verkleinere Start-Position um ein Sample" #: src/frontend_fox/CSoundWindow.cpp:251 msgid "Start: " msgstr "Start: " #: src/frontend_fox/CSoundWindow.cpp:263 msgid "Increase/Decrease Stop Position by One Sample" msgstr "Vergrößere/Verkleinere Stop-Position um ein Sample" #: src/frontend_fox/CSoundWindow.cpp:264 msgid "Stop: " msgstr "Stop: " #: src/frontend_fox/CSoundWindow.cpp:462 msgid "Rate: " msgstr "Rate: " #: src/frontend_fox/CSoundWindow.cpp:463 msgid "Channels: " msgstr "Kanäle: " #: src/frontend_fox/CSoundWindow.cpp:465 msgid "Audio Size: " msgstr "Audio-Größe: " #: src/frontend_fox/CSoundWindow.cpp:498 msgid "Playing: " msgstr "Spiele: " #: src/frontend_fox/EditActionDialogs.cpp:38 #: src/frontend_fox/GenerateActionDialogs.cpp:45 #: src/frontend_fox/GenerateActionDialogs.cpp:138 msgid "Length" msgstr "Länge" #: src/frontend_fox/EditActionDialogs.cpp:38 #: src/frontend_fox/EditActionDialogs.cpp:49 msgid "seconds" msgstr "Sekunden" #: src/frontend_fox/EditActionDialogs.cpp:49 #: src/frontend_fox/EditActionDialogs.cpp:147 msgid "Amount" msgstr "Menge" #: src/frontend_fox/EditActionDialogs.cpp:61 #: src/frontend_fox/RemasterActionDialogs.cpp:47 #: src/frontend_fox/RemasterActionDialogs.cpp:125 msgid "Channel A" msgstr "Kanal A" #: src/frontend_fox/EditActionDialogs.cpp:62 #: src/frontend_fox/RemasterActionDialogs.cpp:54 #: src/frontend_fox/RemasterActionDialogs.cpp:132 msgid "Channel B" msgstr "Kanal B" #: src/frontend_fox/EditActionDialogs.cpp:103 #: src/frontend_fox/EditActionDialogs.cpp:117 msgid "Insert Where" msgstr "Ziel eingeben" #: src/frontend_fox/EditActionDialogs.cpp:104 msgid "Insert Count" msgstr "Anzahl eingeben" #: src/frontend_fox/EditActionDialogs.cpp:116 msgid "Which Channel" msgstr "Welcher Kanal" #: src/frontend_fox/EditActionDialogs.cpp:118 msgid "How Many Times" msgstr "Wie oft" #: src/frontend_fox/EditActionDialogs.cpp:153 msgid "Amount to Affect the Selection in Seconds" msgstr "Dauer, um welche die Selektion vergrößert wird, in Sekunden" #: src/frontend_fox/EditActionDialogs.cpp:156 msgid "Grow Selection to the Left" msgstr "Vergrößere die Selektion nach links" #: src/frontend_fox/EditActionDialogs.cpp:157 msgid "Grow Selection to the Right" msgstr "Vergrößere die Selektion nach rechts" #: src/frontend_fox/EditActionDialogs.cpp:158 msgid "Grow Selection in Both Directions" msgstr "Vergrößere die Selektion in beide Richtungen" #: src/frontend_fox/EditActionDialogs.cpp:159 msgid "Slide Selection to the Left" msgstr "Verschiebe die Selktion nach links" #: src/frontend_fox/EditActionDialogs.cpp:160 msgid "Slide Selection to the Right" msgstr "Verschiebe die Selektion nach rechts" #: src/frontend_fox/EditActionDialogs.cpp:161 msgid "How" msgstr "Wie" #: src/frontend_fox/RemasterActionDialogs.cpp:72 #: src/frontend_fox/RemasterActionDialogs.cpp:149 msgid "Strict Balance" msgstr "Strenge Balance " #: src/frontend_fox/RemasterActionDialogs.cpp:73 #: src/frontend_fox/RemasterActionDialogs.cpp:150 msgid "1x Pan" msgstr "1x Pan" #: src/frontend_fox/RemasterActionDialogs.cpp:74 #: src/frontend_fox/RemasterActionDialogs.cpp:151 msgid "2x Pan" msgstr "2x Pan" #: src/frontend_fox/RemasterActionDialogs.cpp:76 #: src/frontend_fox/RemasterActionDialogs.cpp:153 msgid "Balance Type" msgstr "Balance-Art" #: src/frontend_fox/RemasterActionDialogs.cpp:141 msgid "Balance Curve" msgstr "Balance-Kurve" #: src/frontend_fox/RemasterActionDialogs.cpp:210 msgid "Remove All But One Channel" msgstr "Entferne alle, bis auf einen Kanal" #: src/frontend_fox/RemasterActionDialogs.cpp:211 msgid "Make All Channels The Same" msgstr "Fasse alle Kanäle zusammen" #: src/frontend_fox/RemasterActionDialogs.cpp:213 msgid "Method" msgstr "Methode" #: src/frontend_fox/RemasterActionDialogs.cpp:240 #: src/frontend_fox/RemasterActionDialogs.cpp:288 #: src/frontend_fox/RemasterActionDialogs.cpp:415 msgid "Window Time" msgstr "Zeitfenster" #: src/frontend_fox/RemasterActionDialogs.cpp:248 #: src/frontend_fox/RemasterActionDialogs.cpp:296 msgid "Threshold" msgstr "Schwellwert" #: src/frontend_fox/RemasterActionDialogs.cpp:256 msgid "Gain Attack Time" msgstr "Gain Attack Zeit" #: src/frontend_fox/RemasterActionDialogs.cpp:264 msgid "Gain Release Time" msgstr "Gain Release Zeit" #: src/frontend_fox/RemasterActionDialogs.cpp:304 msgid "Ratio" msgstr "Verhältnis" #: src/frontend_fox/RemasterActionDialogs.cpp:312 msgid "Attack Time" msgstr "Attack Zeit" #: src/frontend_fox/RemasterActionDialogs.cpp:320 msgid "Release Time" msgstr "Release Zeit" #: src/frontend_fox/RemasterActionDialogs.cpp:345 #: src/frontend_fox/RemasterActionDialogs.cpp:392 #: src/frontend_fox/RemasterActionDialogs.cpp:432 msgid "Lock Channels" msgstr "Lock Kanäle" #: src/frontend_fox/RemasterActionDialogs.cpp:347 msgid "" "This Toggles That Compression Should be Applied to Both Channels when Either " "Channel Needs Compression" msgstr "" "Dieser Umschalter sollte aktiviert werden, wenn Kompression auf beide Kanäle " "angewandt werden soll" #: src/frontend_fox/RemasterActionDialogs.cpp:351 msgid "Look Ahead For Level" msgstr "Vorausschauen für Level" #: src/frontend_fox/RemasterActionDialogs.cpp:353 msgid "" "This Toggles That the Compressor Should Look Ahead (by Half the Window Time " "Amount) in the Input Signal When Calculating the Level of the Input Signal" msgstr "" "Dies Aktiviert, daß der Kompressor vorausschauen soll (halbe Zeitfenster-" "Zeit im Input-Signal während das Level des Input-Signals berechnet wird" #: src/frontend_fox/RemasterActionDialogs.cpp:373 #: src/frontend_fox/RemasterActionDialogs.cpp:407 msgid "Normalization Level" msgstr "Normalisierungs-Level" #: src/frontend_fox/RemasterActionDialogs.cpp:383 msgid "Region Count" msgstr "Regions-Zähler" #: src/frontend_fox/RemasterActionDialogs.cpp:394 msgid "Calculate Maximum Sample Value in a Region Across All Channels" msgstr "Berechne den maximalen Sample-Wert in der Region über alle Kanäle" #: src/frontend_fox/RemasterActionDialogs.cpp:423 msgid "Maximum Gain" msgstr "Maximale Verstärkung" #: src/frontend_fox/RemasterActionDialogs.cpp:434 msgid "Calculate Signal Level Across All Channels Simultaneously" msgstr "Berechne den max. Signal-Level Wert gleichzeitig über alle Kanäle" #: src/frontend_fox/RemasterActionDialogs.cpp:453 #: src/frontend_fox/RemasterActionDialogs.cpp:512 msgid "Threshold for Quiet" msgstr "Schwellwert für Still" #: src/frontend_fox/RemasterActionDialogs.cpp:459 #: src/frontend_fox/RemasterActionDialogs.cpp:518 msgid "An audio level below this threshold is considered to be quiet." msgstr "Ein Audio-Level unter diesem Schwellwert ist als Still zu bezeichnen." #: src/frontend_fox/RemasterActionDialogs.cpp:462 #: src/frontend_fox/RemasterActionDialogs.cpp:521 msgid "Must Remain Quiet for" msgstr "Soll still bleiben für" #: src/frontend_fox/RemasterActionDialogs.cpp:468 #: src/frontend_fox/RemasterActionDialogs.cpp:527 msgid "" "The audio level must remain below the threshold for this long before a " "beginning cue will be added." msgstr "" "Der Audio-Level muß solange unter dem Schwellwert bleiben bevor ein Start-" "Marker gesetzt wird." #: src/frontend_fox/RemasterActionDialogs.cpp:471 #: src/frontend_fox/RemasterActionDialogs.cpp:530 msgid "Must Remain Unquiet for" msgstr "Soll nicht-still bleiben für" #: src/frontend_fox/RemasterActionDialogs.cpp:477 #: src/frontend_fox/RemasterActionDialogs.cpp:536 msgid "" "After the beginning of a quiet area has been detected the audio level must " "rise above the threshold for this long for an ending cue to be added." msgstr "" "Solange ein stiller Bereich ermittelt wird, muß der Audio-Level solange über " "einen Schwellenwert ansteigen bevor ein Ende-Marker eingefügt wird." #: src/frontend_fox/RemasterActionDialogs.cpp:480 #: src/frontend_fox/RemasterActionDialogs.cpp:539 msgid "Level Detector Window Time" msgstr "Level-Detector Zeit-Fenster" #: src/frontend_fox/RemasterActionDialogs.cpp:486 #: src/frontend_fox/RemasterActionDialogs.cpp:545 msgid "" "This is the length of the window of audio to analyze for detecting the audio " "level." msgstr "" "Dies ist die Länge des Fensters, in dem die Audio-Daten nach Pegeln " "untersucht werden." #: src/frontend_fox/RemasterActionDialogs.cpp:490 msgid "Quiet Begin Cue Name" msgstr "Stille-Anfang Marker-Name" #: src/frontend_fox/RemasterActionDialogs.cpp:492 msgid "What to Name a Cue That Marks Beginning of a Quiet Region" msgstr "Wie man einen Marker benennt, welcher den Anfang einer Stille markiert" #: src/frontend_fox/RemasterActionDialogs.cpp:496 msgid "Quiet End Cue Name" msgstr "Stille-Ende Marker-Name" #: src/frontend_fox/RemasterActionDialogs.cpp:498 msgid "What to Name a Cue That Marks End of a Quiet Region" msgstr "Wie man einen Marker benennt, welcher das Ende einer Stille markiert" #: src/frontend_fox/RemasterActionDialogs.cpp:548 msgid "Shorten Found Area To" msgstr "Kürze gefundenen Bereich zu" #: src/frontend_fox/RemasterActionDialogs.cpp:554 msgid "" "When a quiet area is found it will be shorted to this much of its original " "length." msgstr "" "Wenn ein stiller Bereich gefunden wurde, dann wird er bis zu diesem Wert der " "originalen Länge gekürzt." #: src/frontend_fox/RemasterActionDialogs.cpp:575 msgid "New Sample Rate" msgstr "Neue Sample-Rate" #: src/frontend_fox/RemasterActionDialogs.cpp:593 #: src/frontend_fox/RemasterActionDialogs.cpp:674 msgid "Pitch" msgstr "Tonhöhe" #: src/frontend_fox/RemasterActionDialogs.cpp:597 msgid "Semitones" msgstr "Halbtöne" #: src/frontend_fox/RemasterActionDialogs.cpp:605 #: src/frontend_fox/RemasterActionDialogs.cpp:687 msgid "Tweaking" msgstr "Tweaking" #: src/frontend_fox/RemasterActionDialogs.cpp:607 #: src/frontend_fox/RemasterActionDialogs.cpp:689 msgid "" "CAUTION: Some of combinations of these parameters cause the SoundTouch " "library to generate assertion errors \n" " that kill the current process. It is not difficult to cause ReZound to " "exit by adjusting these parameters. \n" " Play with these parameters with some testing data, and then save presets " "that do not cause problems. \n" " Hopefully this issue will be worked out in the future.\n" "See the SoundTouch header file for more information about these parameters." msgstr "" "ACHTUNG: Einige Kombinationen dieser Parameter verursachen bei der " "SoundTouch-Bibliothek die Ausgabe von Assertions \n" "die den aktuellen Prozess killen können. Es ist nicht schwer, dadurch " "ReZound zum Beenden zu bewegen. \n" "Spiele mit diesen Parametern mit Test-Daten und speichere Presets, die keine " "Probleme verursachen. \n" "Hoffentlich wird an diesem Issue in Zukunft gearbeitet.\n" "Lese die SoundTouch Header-Datei für nähere Infos zu diesen Parametern." #: src/frontend_fox/RemasterActionDialogs.cpp:610 #: src/frontend_fox/RemasterActionDialogs.cpp:692 msgid "Use Anti-alias Filter" msgstr "Benutze Anti-Alias Filter" #: src/frontend_fox/RemasterActionDialogs.cpp:612 #: src/frontend_fox/RemasterActionDialogs.cpp:694 msgid "Enable/disable anti-alias filter in pitch transposer" msgstr "Aktiviere/Deaktiviere Anti-Alias Filter im Tonhöhen-Umsetzer" #: src/frontend_fox/RemasterActionDialogs.cpp:618 #: src/frontend_fox/RemasterActionDialogs.cpp:700 msgid "Anti-alias Filter Length" msgstr "Anti-Alias Filter Lenge" #: src/frontend_fox/RemasterActionDialogs.cpp:626 #: src/frontend_fox/RemasterActionDialogs.cpp:708 msgid "Use Quick Seek" msgstr "Benutze schnelles Suchen" #: src/frontend_fox/RemasterActionDialogs.cpp:628 #: src/frontend_fox/RemasterActionDialogs.cpp:710 msgid "" "Enable/disable quick seeking algorithm in tempo changer routine (enabling " "quick seeking lowers CPU utilization but causes a minor sound quality " "compromising)" msgstr "" "Aktiviere/Deaktiviere schnellen Such-Algorithmus in Tempoänderungs-Routine " "(aktivieren der Schnell-Suche benötigt weniger CPU, wirkt sich aber auf die " "Sound-Qualität aus)" #: src/frontend_fox/RemasterActionDialogs.cpp:634 #: src/frontend_fox/RemasterActionDialogs.cpp:716 msgid "Sequence Length" msgstr "Sequenz-Länge" #: src/frontend_fox/RemasterActionDialogs.cpp:640 #: src/frontend_fox/RemasterActionDialogs.cpp:722 msgid "" "This is the default length of a single processing sequence, in milliseconds. " "Determines to how long sequences the original sound is chopped in time-" "stretch algorithm. The larger this value is, the lesser sequences are used " "in processing. In principle a bigger value sounds better when slowing down " "tempo, but worse when increasing tempo and vice versa." msgstr "" "Dies ist die Standard-Länge einer einzelnen Verarbeitungssequenz in " "Millisekunden. Errechnet, wie lang Sequenzen des Original-Sounds zerhackt " "werden im Zeit-Stretch Algorithmus. Je höher der Wert ist, umso weniger " "Sequenzen werden in der Verarbeitung benutzt. Allgemein klingt ein größerer " "Wert besser beim langsamer werden, aber schlechter wenn das Tempo erhöht " "wird und umgekehrt." #: src/frontend_fox/RemasterActionDialogs.cpp:645 #: src/frontend_fox/RemasterActionDialogs.cpp:727 msgid "Seek Window Length" msgstr "Suchen-Fenster Länge" #: src/frontend_fox/RemasterActionDialogs.cpp:651 #: src/frontend_fox/RemasterActionDialogs.cpp:733 msgid "" "Seeking window default length in milliseconds for algorithm that seeks for " "the best possible overlapping location. This determines from how wide sample " "'window' the algorithm can look for an optimal mixing location when the " "sound sequences are to be linked back together. The bigger this window " "setting is, the higher the possibility to find a better mixing position " "becomes, but at the same time large values may cause a 'drifting' sound " "artifact because neighbouring sequences can be chosen at more uneven " "intervals. If there's a disturbing artifact that sounds as if a constant " "frequency was drifting around, try reducing this setting." msgstr "" "Suchen-Fenster Standardlänge in Millisekunden für Algorithmus das nach der " "best möglichen Überlappungs-Position sucht. Dieser ermittelt, wie weit " "Sample 'Fenster' der Algorithmus suchen kann, um eine optimale Misch-" "Position zu ermitteln, wenn Sound-Sequenzen wieder zusammengeführt werden " "sollen. Je größer das Fenster-Setting ist, desto größer ist die Möglichkeit, " "eine bessere Misch-Position zu finden. Aber gleichzeitig können höhere Werte " "dazu führen, daß der Sound treibende Artifakte bildet, weil Nachbarsequenzen " "in ungleichen Intervallen gewählt werden können. Sollte ein störendes " "Artifakt vorhanden sein, welches wie eine konstante Frequenz klingt, welche " "umherschwirrt, dann reduziere diesen Wert." #: src/frontend_fox/RemasterActionDialogs.cpp:656 #: src/frontend_fox/RemasterActionDialogs.cpp:738 msgid "Overlap Length" msgstr "Überlappungs-Länge" #: src/frontend_fox/RemasterActionDialogs.cpp:662 #: src/frontend_fox/RemasterActionDialogs.cpp:744 msgid "" "Overlap length in milliseconds. When the chopped sound sequences are mixed " "back together to form again a continuous sound stream, this parameter " "defines over how long period the two consecutive sequences are allowed to " "overlap each other. This shouldn't be that critical of a parameter. If you " "reduce the 'Sequence Length' setting by a large amount, you might wish to " "try a smaller value on this." msgstr "" "Überlappe Länge in Millisekunden. Wenn die zerhackten Sound-Sequenzen wieder " "zusammengemischt werden, um einen kontinuierlichen Sound-Stream zu bilden, " "dann definiert dieser Parameter wie lange die beiden aufeinanderfolgenden " "Sequenzen sich überlappen dürfen. Dies sollte nicht so kritisch sein bei " "einem Parameter. Wird die Sequenz-Länge stark reduziert, wünscht man sich " "schnell einen kleineren Wert dafür" #: src/frontend_fox/RemasterActionDialogs.cpp:679 msgid "Tempo Change" msgstr "Rate Change" #: src/frontend_fox/CProgressDialog.cpp:47 #: src/frontend_fox/FXModalDialogBox.cpp:58 msgid "&Cancel" msgstr "Abbrechen" #: src/frontend_fox/CProgressDialog.cpp:84 msgid "Time Elapsed " msgstr "Zeit verstrichen " #: src/frontend_fox/CProgressDialog.cpp:96 msgid "Estimated Time Remaining " msgstr "Geschätzte Verbleibene Zeit " #: src/frontend_fox/CRecordDialog.cpp:84 msgid " Cue Prefix:" msgstr "Marker Prefix:" #: src/frontend_fox/CRecordDialog.cpp:88 msgid "Cue Number:" msgstr "Marker-Anzahl:" #: src/frontend_fox/CRecordDialog.cpp:92 msgid "Add Anchored Cue" msgstr "Verankerte Marker hinzufügen" #: src/frontend_fox/CRecordDialog.cpp:98 src/frontend_fox/CRecordDialog.cpp:99 msgid "Recording:" msgstr "Aufnahme:" #: src/frontend_fox/CRecordDialog.cpp:101 #: src/frontend_fox/CRecordDialog.cpp:102 msgid "Waiting for Threshold:" msgstr "Warte auf Schwellwert:" #: src/frontend_fox/CRecordDialog.cpp:107 msgid "Record Length: " msgstr "Aufnahmelänge: " #: src/frontend_fox/CRecordDialog.cpp:108 msgid "Record Size: " msgstr "Aufnahmegröße: " #: src/frontend_fox/CRecordDialog.cpp:109 msgid "Record Limit: " msgstr "Aufnahme-Limit" #: src/frontend_fox/CRecordDialog.cpp:115 msgid "DCOffset: " msgstr "DC Offset: " #: src/frontend_fox/CRecordDialog.cpp:116 msgid "Reported Every 5 Seconds" msgstr "Anzeige alle 5 Sekunden" #: src/frontend_fox/CRecordDialog.cpp:117 msgid "" "Compensate\tSubtract out the currently reported DC Offset from any further " "recorded data" msgstr "" "Abgleichen\tSubtrahieren des gerade gemeldeten DC Offset jeder weiteren " "Aufnahme" #: src/frontend_fox/CRecordDialog.cpp:120 msgid "Reset" msgstr "Reset" #: src/frontend_fox/CRecordDialog.cpp:121 #: src/frontend_fox/CRecordDialog.cpp:183 #: src/frontend_fox/CRecordDialog.cpp:360 msgid "Clip Count: " msgstr "Clipping-Zähler: " #: src/frontend_fox/CRecordDialog.cpp:125 msgid "" "Record/\n" "Resume" msgstr "" "Aufnahme/\n" "Weiter" #: src/frontend_fox/CRecordDialog.cpp:126 msgid "" "Stop/\n" "Pause" msgstr "" "Stop/\n" "Pause" #: src/frontend_fox/CRecordDialog.cpp:127 msgid "" "Redo/\n" "Reset" msgstr "" "Redo/\n" "Reset" #: src/frontend_fox/CRecordDialog.cpp:130 msgid "Limit Duration to " msgstr "Zeitbegrenzung bis " #: src/frontend_fox/CRecordDialog.cpp:137 msgid "Effective on Threshold " msgstr "Gültig für Schwellwert " #: src/frontend_fox/CRecordDialog.cpp:234 msgid "DC Offset: " msgstr "DC Offset: " #: src/frontend_fox/CRecordDialog.cpp:290 msgid "" "Invalid record time limit -- Should be in the form of HH:MM:SS.sss, MM:SS." "sss or SS.sss" msgstr "" "Ungültige Aufnahmezeit-Begrenzung -- Sollte sein, wie HH:MM:SS.sss, MM:SS." "sss oder SS.sss" #: src/frontend_fox/CCueDialog.cpp:48 msgid "Cue Properties" msgstr "Marker Einstellungen" #: src/frontend_fox/CCueDialog.cpp:51 msgid "Cue Name:" msgstr "Marker Name:" #: src/frontend_fox/CCueDialog.cpp:55 msgid " Cue Time:" msgstr "Marker Zeit:" #: src/frontend_fox/CCueDialog.cpp:59 msgid "" "Anchored in Time\tMeaning That This Cue's Position Will Not Be Affected by " "Adding and Removing Space Within the Audio" msgstr "" "Zeit-Verankerung\tBedeutet, daß die Markerposition nicht durch Hinzufügen " "und Entfernen von Bereichen beeinflusst wird" #: src/frontend_fox/CCueDialog.cpp:103 msgid "Cue Name Too Long" msgstr "Marker Name zu lang" #: src/frontend_fox/CCueDialog.cpp:111 msgid "Invalid Cue Time. Format: HH:MM:SS.sssss or MM:SS.sssss" msgstr "Ungültiger Marker Name. Format: HH:MM:SS.sssss oder MM:SS.sssss" #: src/frontend_fox/CStatusComm.cpp:93 msgid "Warning" msgstr "Warnung" #: src/frontend_fox/CStatusComm.cpp:98 msgid "Note" msgstr "Anmerkung" #: src/frontend_fox/CStatusComm.cpp:113 msgid "Question" msgstr "Frage" #: src/frontend_fox/CPasteChannelsDialog.cpp:60 msgid "Paste Channels" msgstr "Kanäle Einfügen" #: src/frontend_fox/CPasteChannelsDialog.cpp:62 msgid "Pasting Parameters:" msgstr "Einfügen-Parameter:" #: src/frontend_fox/CPasteChannelsDialog.cpp:77 #: src/frontend_fox/CPasteChannelsDialog.cpp:213 #: src/frontend_fox/CPasteChannelsDialog.cpp:217 msgid "Repeat Count" msgstr "Wiederholungsfaktor" #: src/frontend_fox/CPasteChannelsDialog.cpp:85 msgid "Repeat Time" msgstr "Wiederholungs-Zeit" #: src/frontend_fox/CPasteChannelsDialog.cpp:93 msgid "Repeat X Times" msgstr "Wiederhole X Mal" #: src/frontend_fox/CPasteChannelsDialog.cpp:94 msgid "Repeat for X Seconds" msgstr "Wiederhole für X Sekunden" #: src/frontend_fox/CPasteChannelsDialog.cpp:104 #: src/frontend_fox/CChannelSelectDialog.cpp:70 msgid "Default" msgstr "Standard" #: src/frontend_fox/CPasteChannelsDialog.cpp:107 msgid "Mix Type:" msgstr "Mischungs-Art:" #: src/frontend_fox/CPasteChannelsDialog.cpp:110 msgid "Add" msgstr "Hinzufügen" #: src/frontend_fox/CPasteChannelsDialog.cpp:111 msgid "Subtract" msgstr "Subtrahieren" #: src/frontend_fox/CPasteChannelsDialog.cpp:112 msgid "Multiply" msgstr "Multiplizieren" #: src/frontend_fox/CPasteChannelsDialog.cpp:113 msgid "Average" msgstr "Mittelwert" #: src/frontend_fox/CPasteChannelsDialog.cpp:117 msgid "Clipboard" msgstr "Clipboard" #: src/frontend_fox/CPasteChannelsDialog.cpp:118 msgid "Destination" msgstr "Bestimmungsort" #: src/frontend_fox/CPasteChannelsDialog.cpp:209 msgid "MixMethod" msgstr "Misch-Methode" #: src/frontend_fox/CNewSoundDialog.cpp:52 msgid "New Sound" msgstr "Neuer Sound" #: src/frontend_fox/CNewSoundDialog.cpp:55 msgid "Filename:" msgstr "Dateiname: " #: src/frontend_fox/CNewSoundDialog.cpp:57 #: src/frontend_fox/FXDiskEntityParamValue.cpp:62 msgid "&Browse" msgstr "&Browse" #: src/frontend_fox/CNewSoundDialog.cpp:59 msgid "Raw Format" msgstr "Roh-Format" #: src/frontend_fox/CNewSoundDialog.cpp:62 src/frontend_fox/CRawDialog.cpp:51 #: src/frontend_fox/CVoxDialog.cpp:47 msgid "Channels:" msgstr "Kanäle:" #: src/frontend_fox/CNewSoundDialog.cpp:65 src/frontend_fox/CRawDialog.cpp:58 #: src/frontend_fox/CVoxDialog.cpp:54 msgid "Sample Rate:" msgstr "Sample-Rate:" #: src/frontend_fox/CNewSoundDialog.cpp:68 msgid "Length:" msgstr "Länge:" #: src/frontend_fox/CNewSoundDialog.cpp:71 msgid "second(s)" msgstr "Sekunde(n)" #: src/frontend_fox/CNewSoundDialog.cpp:74 msgid "Remember as Default" msgstr "Einstellung merken" #: src/frontend_fox/CNewSoundDialog.cpp:98 msgid "0.25" msgstr "0.25" #: src/frontend_fox/CNewSoundDialog.cpp:99 msgid "0.5" msgstr "0.5" #: src/frontend_fox/CNewSoundDialog.cpp:100 msgid "0.75" msgstr "0.75" #: src/frontend_fox/CNewSoundDialog.cpp:193 msgid "Please supply a filename" msgstr "Bitte Dateinamen angeben" #: src/frontend_fox/CNewSoundDialog.cpp:204 msgid "" "Are you sure you want to overwrite the existing file:\n" " " msgstr "" "Wollen Sie wirklich die vorhandene Datei überschreiben:\n" " " #: src/frontend_fox/CNewSoundDialog.cpp:217 msgid "Invalid number of channels" msgstr "Unzulässige Anzahl von Kanälen" #: src/frontend_fox/CNewSoundDialog.cpp:226 msgid "Invalid sample rate" msgstr "Ungültige Sample-Rate" #: src/frontend_fox/CNewSoundDialog.cpp:236 msgid "Invalid length" msgstr "Ungültige Länge" #: src/frontend_fox/CRawDialog.cpp:46 msgid "Raw Parameters" msgstr "Roh-Einstellungen" #: src/frontend_fox/CRawDialog.cpp:72 msgid "Sample Format:" msgstr "Sample-Format:" #: src/frontend_fox/CRawDialog.cpp:75 msgid "8bit Signed PCM" msgstr "8 Bit Signed PCM" #: src/frontend_fox/CRawDialog.cpp:76 msgid "8bit Unsigned PCM" msgstr "8 Bit Unsigned PCM" #: src/frontend_fox/CRawDialog.cpp:77 msgid "16bit Signed PCM" msgstr "16 Bit Signed PCM" #: src/frontend_fox/CRawDialog.cpp:78 msgid "16bit Unsigned PCM" msgstr "16 Bit UUnsigned PCM" #: src/frontend_fox/CRawDialog.cpp:79 msgid "24bit Signed PCM" msgstr "24 Bit Signed PCM" #: src/frontend_fox/CRawDialog.cpp:80 msgid "24bit Unsigned PCM" msgstr "24 Bit Unsigned PCM" #: src/frontend_fox/CRawDialog.cpp:81 msgid "32bit Signed PCM" msgstr "32 Bit Signed PCM" #: src/frontend_fox/CRawDialog.cpp:82 msgid "32bit Unsigned PCM" msgstr "32 Bit Unsigned PCM" #: src/frontend_fox/CRawDialog.cpp:83 msgid "32bit Floating Point PCM" msgstr "32 Bit Floating-Point PCM" #: src/frontend_fox/CRawDialog.cpp:84 msgid "64bit Floating Point PCM" msgstr "64 Bit Floating-Point PCM" #: src/frontend_fox/CRawDialog.cpp:87 msgid "Byte Order:" msgstr "Byte-Order:" #: src/frontend_fox/CRawDialog.cpp:88 msgid "Little Endian (Intel)" msgstr "Little Endian (Intel)" #: src/frontend_fox/CRawDialog.cpp:88 msgid "Big Endian (non-Intel)" msgstr "Big Endian (non-Intel)" #: src/frontend_fox/CRawDialog.cpp:92 msgid "Data Start:" msgstr "Daten-Beginn:" #: src/frontend_fox/CRawDialog.cpp:96 msgid "in bytes" msgstr "in Bytes" #: src/frontend_fox/CRawDialog.cpp:98 msgid "Data Length:" msgstr "Daten-Länge" #: src/frontend_fox/CRawDialog.cpp:99 src/frontend_fox/CRawDialog.cpp:103 #: src/frontend_fox/CRawDialog.cpp:104 msgid "normally leave this 0" msgstr "Normalerweise auf 0 gesetzt" #: src/frontend_fox/CRawDialog.cpp:104 msgid "in audio frames" msgstr "In Audio-Frames" #: src/frontend_fox/CRawDialog.cpp:163 msgid "invalid negative data offset" msgstr "Ungültiger negativer Daten-Versatz" #: src/frontend_fox/CRawDialog.cpp:170 msgid "invalid negative data length" msgstr "Ungültige negative Daten-Länge" #: src/frontend_fox/CCueListDialog.cpp:66 msgid "Cue List" msgstr "Marker Liste" #: src/frontend_fox/CCueListDialog.cpp:76 msgid "&Add" msgstr "Hinzufügen" #: src/frontend_fox/CMetersWindow.cpp:510 msgid "" "Adjust Zoom Factor for Stereo Phase Meter\n" "All the way down means no zooming" msgstr "" "Ändere Zoom-Faktor des Stereo Phasen-Meter\n" "Alles nach unten bedeutet keinen Zoom" #: src/frontend_fox/CMetersWindow.cpp:602 #: src/frontend_fox/CMetersWindow.cpp:604 msgid "Unrotate from Natural 45 Degree Line" msgstr "Zurückdrehen von natürlicher 45 Grad Linie" #: src/frontend_fox/CMetersWindow.cpp:760 msgid "" "Adjust Zoom Factor for Analyzer\n" "Right-click for Default" msgstr "" "Zoom-Faktor für Analyzer anpassen\n" "Rechts-Klick für Standard" #: src/frontend_fox/CMetersWindow.cpp:836 msgid "Configure with FFTW" msgstr "Konfigurieren mit FFTW" #: src/frontend_fox/CMetersWindow.cpp:837 msgid "for Freq. Analysis" msgstr "für Frequenz-Analyse" #: src/frontend_fox/settings.cpp:81 msgid "Show Time Units in..." msgstr "Zeige Zeit-Einheiten in ..." #: src/frontend_fox/settings.cpp:83 msgid "Seconds" msgstr "Sekunden" #: src/frontend_fox/settings.cpp:85 msgid "Frames" msgstr "Frames" #: src/frontend_fox/settings.cpp:87 msgid "Bytes" msgstr "Bytes" #: src/frontend_fox/LoopingActionDialogs.cpp:32 #: src/frontend_fox/LoopingActionDialogs.cpp:58 msgid "Cue Name" msgstr "Marker-Name" #: src/frontend_fox/LoopingActionDialogs.cpp:34 #: src/frontend_fox/LoopingActionDialogs.cpp:60 msgid "What to Name the New Cues" msgstr "Wie neue Marker bennannt werden" #: src/frontend_fox/LoopingActionDialogs.cpp:38 msgid "Cue Count" msgstr "Marker-Anzahl" #: src/frontend_fox/LoopingActionDialogs.cpp:43 msgid "How Many Cues to Place Equally Spaced within the Selection" msgstr "Wieviel Marker gleichmäßig innerhalb der Selektion verteilt werden" #: src/frontend_fox/LoopingActionDialogs.cpp:47 #: src/frontend_fox/LoopingActionDialogs.cpp:72 msgid "Anchor Cues in Time" msgstr "Verankere Marker in Zeit" #: src/frontend_fox/LoopingActionDialogs.cpp:49 #: src/frontend_fox/LoopingActionDialogs.cpp:74 msgid "Set the Cues to be Anchored in Time or Not" msgstr "Setze die Marker zeitverankert, oder nicht" #: src/frontend_fox/LoopingActionDialogs.cpp:64 msgid "Time Interval" msgstr "Zeit-Intervall" #: src/frontend_fox/ClibaudiofileSaveParametersDialog.cpp:40 msgid "Save Parameters" msgstr "Speichere Parameter" #: src/frontend_fox/ClibaudiofileSaveParametersDialog.cpp:50 #: src/frontend_fox/CRezSaveParametersDialog.cpp:49 msgid "Sample Format" msgstr "Sample-Format:" #: src/frontend_fox/ClibaudiofileSaveParametersDialog.cpp:62 msgid "Sample Width" msgstr "Sample Breite" #: src/frontend_fox/ClibaudiofileSaveParametersDialog.cpp:66 msgid "Compression Type" msgstr "Kompressionstyp " #: src/frontend_fox/ClibaudiofileSaveParametersDialog.cpp:68 msgid "Save Cues" msgstr "Marker speichern" #: src/frontend_fox/ClibaudiofileSaveParametersDialog.cpp:68 msgid "" "Enable or Disable the saving of cues to the file if the format supports it" msgstr "" "Aktiviere oder deaktiviere die Speicherung vom Markern in eine Datei, sofern " "das Format es unterstützt" #: src/frontend_fox/ClibaudiofileSaveParametersDialog.cpp:69 msgid "Save User Notes" msgstr "Speichere Benutzer-Anmerkungen" #: src/frontend_fox/ClibaudiofileSaveParametersDialog.cpp:69 msgid "" "Enable or Disable the saving of user notes to the file if the format " "supports it" msgstr "" "Aktiviere oder Deaktiviere die Speicherung von Anmerkungen in eine Datei, " "sofern das Format es unterstützt" #: src/frontend_fox/ClibaudiofileSaveParametersDialog.cpp:70 msgid "" "Some software may not handle files containing cues or user notes.\n" "So, you can disable their being saved to the file." msgstr "" "Manche Software kann keine Dateien bearbeiten, welche Marker oder " "Anmerkungen beinhaltet.\n" "So kannst Du deaktivieren, daß sie in die Datei gespeichert werden." #: src/frontend_fox/ClibaudiofileSaveParametersDialog.cpp:165 msgid "" "Some combinations of values may cause issues.\n" "This is because ReZound cannot tell enough from the libaudiofile library " "what is valid." msgstr "" "Einige Werte-Kombinationen können Problem verursachen.\n" "Dies geschieht, weil ReZound von der libaudiofile Bibliothek nicht erfährt " "was gültig ist." #: src/frontend_fox/FXConstantParamValue.cpp:74 msgid "I\tInvert Value" msgstr "I\tInvertieren des Wertes" #: src/frontend_fox/FXConstantParamValue.cpp:109 #: src/frontend_fox/FXGraphParamValue.cpp:445 msgid "Scalar" msgstr "Skalar" #: src/frontend_fox/FXDiskEntityParamValue.cpp:64 msgid "Open as &Raw" msgstr "Öffnen als Raw" #: src/frontend_fox/CChannelSelectDialog.cpp:58 msgid "Channel Select" msgstr "Kanal-Auswahl" #: src/frontend_fox/CChannelSelectDialog.cpp:60 msgid "Channels to Which This Action Should Apply:" msgstr "Kanäle auf welche diese Aktion ausgeführt werden sollen:" #: src/frontend_fox/FXGraphParamValue.cpp:380 msgid "Clear to Normal" msgstr "Lösche bis Normal" #: src/frontend_fox/FXGraphParamValue.cpp:381 msgid "Flip Graph Horizontally" msgstr "Tausche Graphen horizontal" #: src/frontend_fox/FXGraphParamValue.cpp:382 msgid "Flip Graph Vertically" msgstr "Tausche Graphen vertikal" #: src/frontend_fox/FXGraphParamValue.cpp:383 msgid "Smooth Graph Nodes" msgstr "Glätte Graphen-Knoten" #: src/frontend_fox/FXGraphParamValue.cpp:1025 #: src/frontend_fox/FXGraphParamValue.cpp:1041 msgid "points" msgstr "Punkte" #: src/frontend_fox/CKeyBindingsDialog.cpp:52 msgid "Assign Hotkey" msgstr "Belege Zugriffstaste" #: src/frontend_fox/CKeyBindingsDialog.cpp:57 msgid "Press a Key Combination" msgstr "Drücke eine Tastenkombination" #: src/frontend_fox/CKeyBindingsDialog.cpp:58 msgid "Assign No Key" msgstr "Belege keine Taste" #: src/frontend_fox/CKeyBindingsDialog.cpp:59 msgid "Cancel" msgstr "Abbrechen" #: src/frontend_fox/CKeyBindingsDialog.cpp:143 msgid "Hot Keys" msgstr "Zugriffstasten" #: src/frontend_fox/CKeyBindingsDialog.cpp:148 msgid "Assign Hot Keys" msgstr "Belege Zugrisstasten" #: src/frontend_fox/CKeyBindingsDialog.cpp:180 msgid "Action" msgstr "Aktion" #: src/frontend_fox/CKeyBindingsDialog.cpp:181 msgid "Hot Key" msgstr "Zugriffstaste" #: src/frontend_fox/CKeyBindingsDialog.cpp:185 msgid "Assign\tOr Double-Click An Item" msgstr "Zuweisen\toder Doppel-Klick auf einen Eintrag" #: src/frontend_fox/CKeyBindingsDialog.cpp:213 msgid "Unhandled Key Combination" msgstr "Unbehandelte Tastenkombination" #: src/frontend_fox/CKeyBindingsDialog.cpp:227 msgid " is already assigned to: " msgstr " ist bereits zugewiesen zu: " #: src/frontend_fox/CKeyBindingsDialog.cpp:227 msgid "Do you want to override the existing key assignment?" msgstr "Wollen Sie wirklich die vorhandene Tastenzuweisung überschreiben ? " #: src/frontend_fox/GenerateActionDialogs.cpp:53 #: src/frontend_fox/GenerateActionDialogs.cpp:146 msgid "Volume" msgstr "Lautstärke" #: src/frontend_fox/GenerateActionDialogs.cpp:61 msgid "Max Particle Velocity" msgstr "Max. Partikel Geschwindigeit" #: src/frontend_fox/GenerateActionDialogs.cpp:70 msgid "White (Equal Energy per Frequency)" msgstr "Weiß (Gleiche Energie je Frequenz)" #: src/frontend_fox/GenerateActionDialogs.cpp:71 msgid "Pink (Natural, Equal Energy per Octave; response: f^(-1))" msgstr "Rosa (Natürlich, Gleiche Energie je Oktave; Antwort: f^(-1))" #: src/frontend_fox/GenerateActionDialogs.cpp:72 msgid "Brown (as in Brownian Motion; response: f^(-2))" msgstr "Braun (wie in Braun'scher Molekularbewegung; Antwort: f^(-1))" #: src/frontend_fox/GenerateActionDialogs.cpp:73 msgid "Black :)" msgstr "Schwarz :)" #: src/frontend_fox/GenerateActionDialogs.cpp:79 msgid "Noise Color" msgstr "Geräusch-Farbe" #: src/frontend_fox/GenerateActionDialogs.cpp:91 msgid "Independent Channels" msgstr "Unabhängige Kanäle" #: src/frontend_fox/GenerateActionDialogs.cpp:92 msgid "Mono" msgstr "Mono" #: src/frontend_fox/GenerateActionDialogs.cpp:93 msgid "Inverse Mono" msgstr "Inverses Mono" #: src/frontend_fox/GenerateActionDialogs.cpp:96 msgid "Stereo Image" msgstr "Stereo-Bild" #: src/frontend_fox/GenerateActionDialogs.cpp:155 msgid "Sine Wave" msgstr "Sinus-Kurve" #: src/frontend_fox/GenerateActionDialogs.cpp:156 msgid "Square Wave" msgstr "Rechteck-Welle" #: src/frontend_fox/GenerateActionDialogs.cpp:157 msgid "Rising Sawtooth Wave" msgstr "Ansteigende Sägezahn-Welle" #: src/frontend_fox/GenerateActionDialogs.cpp:158 msgid "Falling Sawtooth Wave" msgstr "Absteigende Sägezahn-Welle" #: src/frontend_fox/GenerateActionDialogs.cpp:159 msgid "Triangle Wave" msgstr "Dreiecks-Welle" #: src/frontend_fox/GenerateActionDialogs.cpp:161 msgid "Tone Type" msgstr "Tonart" #: src/frontend_fox/CVoxDialog.cpp:42 msgid "Vox Parameters" msgstr "Vox-Parameter" #: src/frontend_fox/CLADSPAActionDialog.cpp:87 msgid "Controls" msgstr "Steuerung" #: src/frontend_fox/CLADSPAActionDialog.cpp:192 msgid "Routing" msgstr "Routing" #: src/frontend_fox/CLADSPAActionDialog.cpp:195 msgid "Channel Mapping" msgstr "Kanal Mapping" #: src/frontend_fox/CLADSPAActionDialog.cpp:209 msgid "" "THIS IS THE ONLY TIME THIS WARNING WILL BE SHOWN. SO READ IT!!!\n" "\n" "SOME LADSPA plugins use libfftw. libfftw can be configured to use either " "floats or doubles as its native sample format (but not both at the same " "time). If the LADSPA plugins on this system were compiled with a " "differently configured libfftw than ReZound was built with, then you may " "receive garbage from the LADSPA plugin. If this is the case, then either " "rebuild ReZound or the LADSPA plugins to make the types match." msgstr "" "DIES IST DAS EINZIGE MAL, WO DIESE WARNUNG GEZEIGT WIRD. LESE SIE!!!\n" "\n" "EINIGE LADSPA Plugins benutzen libfftw. libfftw kann konfiguriert werden, " "entweder Floats oder Doubles als sein natives Sample-Format zu benutzen " "( aber nicht beide gleichzeitig). Wenn LADSPA Plugins auf diesem System mit " "einer anders konfigurierten libfftw konfiguriert wurden, als die von Rezound," "wirst Du Müll vom LADSPA Plugin bekommen. Sollte dies der Fall sein, dann " "baue entweder ReZound oder die LADSPA Plugins neu, damit sie passen." #: src/frontend_fox/CRezSaveParametersDialog.cpp:40 msgid "ReZound Save Parameters" msgstr "ReZound Speichern-Einstellungen" #: src/frontend_fox/CRezSaveParametersDialog.cpp:44 msgid "8 Bit Integer" msgstr "8 Bit Integer" #: src/frontend_fox/CRezSaveParametersDialog.cpp:45 msgid "16 Bit Integer" msgstr "16 Bit Integer" #: src/frontend_fox/CRezSaveParametersDialog.cpp:46 msgid "24 Bit Integer" msgstr "24 Bit Integer" #: src/frontend_fox/CRezSaveParametersDialog.cpp:47 msgid "32 Bit Integer" msgstr "32 Bit Integer" #: src/frontend_fox/CRezSaveParametersDialog.cpp:48 msgid "32 Bit Float" msgstr "32 Bit Float" #: src/frontend_fox/CFrontendHooks.cpp:66 msgid "Select Directory" msgstr "Verzeichnis auswählen" #: src/frontend_fox/CFrontendHooks.cpp:91 msgid "Open File" msgstr "Datei öffnen" #: src/frontend_fox/CFrontendHooks.cpp:99 msgid "Open as Raw" msgstr "Öffnen als Raw" #: src/frontend_fox/CFrontendHooks.cpp:107 msgid "Save File" msgstr "Datei speichern" #: src/frontend_fox/CFrontendHooks.cpp:115 msgid "Save as Raw" msgstr "Speichern als Raw" #: src/frontend_fox/CFrontendHooks.cpp:190 msgid "All Supported Types" msgstr "Alle unterstützen Formate" #: src/frontend_fox/CFrontendHooks.cpp:190 msgid "All Files" msgstr "Alle Dateien" #: src/frontend_fox/CMIDIDumpSampleIdDialog.cpp:45 msgid "MIDI Sample Dump" msgstr "MIDI Sample Dump" #: src/frontend_fox/CMIDIDumpSampleIdDialog.cpp:49 msgid "Wait for Dump" msgstr "Warten auf Dump" #: src/frontend_fox/CMIDIDumpSampleIdDialog.cpp:52 msgid "Sample ID" msgstr "Sample ID" #: src/frontend_fox/CMIDIDumpSampleIdDialog.cpp:57 msgid "SysEx Channel" msgstr "SysEx Kanal" #: src/frontend_fox/CMIDIDumpSampleIdDialog.cpp:62 msgid "Loop Type" msgstr "Loop Typ" #: src/frontend_fox/CMIDIDumpSampleIdDialog.cpp:102 #: src/frontend_fox/CMIDIDumpSampleIdDialog.cpp:139 msgid "Waveform IDs must be from 0 to 16384" msgstr "Waveform-IDs gehen von 0 bis 16384" #: src/frontend_fox/CMIDIDumpSampleIdDialog.cpp:148 msgid "Loop type must be from 0 to 127" msgstr "Loop Typ geht von 0 bis 127" #: src/frontend_fox/COggDialog.cpp:56 msgid "Ogg Compression Parameters" msgstr "Ogg Kompressions-Parameter" #: src/frontend_fox/COggDialog.cpp:63 msgid "Quality Setting" msgstr "Qualitäts-Einstellung" #: src/frontend_fox/COggDialog.cpp:65 src/frontend_fox/CMp3Dialog.cpp:99 msgid "Quality: " msgstr "Qualität: " #: src/frontend_fox/COggDialog.cpp:69 msgid "0 (lowest) to 1 (highest)" msgstr "0 (Geringste) bis 1 (Höchste)" #: src/frontend_fox/COggDialog.cpp:73 src/frontend_fox/CMp3Dialog.cpp:75 msgid "Constant Bit Rate" msgstr "Gleichmäßige Bit-Rate" #: src/frontend_fox/COggDialog.cpp:75 src/frontend_fox/CMp3Dialog.cpp:77 msgid "Bit Rate: " msgstr "Bit Rate: " #: src/frontend_fox/COggDialog.cpp:81 msgid "Variable Bit Rate" msgstr "Variable Bit-Rate" #: src/frontend_fox/COggDialog.cpp:83 src/frontend_fox/CMp3Dialog.cpp:85 msgid "Minimum Bit Rate: " msgstr "Minimum Bit Rate" #: src/frontend_fox/COggDialog.cpp:86 msgid "Normal Bit Rate: " msgstr "Normale Bit-Rate: " #: src/frontend_fox/COggDialog.cpp:89 src/frontend_fox/CMp3Dialog.cpp:91 msgid "Maximum Bit Rate: " msgstr "Maximum Bit Rate: " #: src/frontend_fox/FXLFOParamValue.cpp:77 msgid "Phase" msgstr "Phase" #: src/frontend_fox/FXModalDialogBox.cpp:57 msgid "&Okay" msgstr "&Okay" #: src/frontend_fox/CMp3Dialog.cpp:68 msgid "mp3 Compression Parameters" msgstr "MP3 Kompressions-Parameter" #: src/frontend_fox/CMp3Dialog.cpp:83 msgid "Average Bit Rate" msgstr "Durchschn. Bit Rate" #: src/frontend_fox/CMp3Dialog.cpp:88 msgid "Average Bit Rate: " msgstr "Durchschn. Bit Rate: " #: src/frontend_fox/CMp3Dialog.cpp:97 msgid "Variable Bit Rate Quality Setting" msgstr "Variable Bit-Raten Qual.-Einstellung" #: src/frontend_fox/CMp3Dialog.cpp:105 msgid "0(Highest Quality -> 9(Lowest Quality)" msgstr "0(Hohe Qualität -> 9(Niedrige Qualität)" #: src/frontend_fox/CMp3Dialog.cpp:110 msgid "Use Only These Flags" msgstr "Benutze nur diese Flags" #: src/frontend_fox/CMp3Dialog.cpp:114 msgid "Additional Flags: " msgstr "Zusätzliche Flags: " #: src/frontend_fox/CMp3Dialog.cpp:117 msgid "To lame" msgstr "Nach Lame" #: src/backend/File/parse_segment_cues.h:74 msgid "" " -- syntax error in cue names -- expected to find a cue beginning with '(' " "at time: " msgstr "" " -- Syntax-Fehler bei Marker-Namen -- Erwarte Marker zu beginnen mit '(' bei " "Zeit: " #: src/backend/File/parse_segment_cues.h:98 msgid "" " -- syntax error in cue names -- expected to find a cue beginning with '(' " "or ')' at time: " msgstr "" " -- Syntax-Fehler bei Marker-Namen -- Erwarte Marker zu beginnen mit '(' " "oder ')' bei Zeit: " #: src/backend/File/parse_segment_cues.h:103 msgid " -- internal error -- invalid state: " msgstr " -- interner Fehler -- ungültiger Status: " #~ msgid "" #~ "About to write data to burn. Afterwards burning will begin. Watch " #~ "standard output/error for progress information, or just wait for cdrdao " #~ "to finish." #~ msgstr "" #~ "Werde gleich Daten brennen. Danach wird der Brennvorgang starten. Beachte " #~ "Ausgabe/Fehler auf Fortschritts-Infos oder warte, bis cdrdao fertig ist"