     [file version.texi not included]

This file documents GNU Libtool VERSION

Copyright (C) 1996-2003, 2005-2007 Free Software Foundation, Inc.

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts.  A copy of the license is included in the section entitled "GNU Free Documentation License".

Shared library support for GNU
******************************

This file documents GNU Libtool, a script that allows package developers to provide generic shared library support.  This edition documents version VERSION.

See Reporting bugs, for information on how to report problems with libtool.

Introduction
************

In the past, if a source code package developer wanted to take advantage of the power of shared libraries, he needed to write custom support code for each platform on which his package ran.  He also had to design a configuration interface so that the package installer could choose what sort of libraries were built.

GNU Libtool simplifies the developer's job by encapsulating both the platform-specific dependencies, and the user interface, in a single script.  GNU Libtool is designed so that the complete functionality of each host type is available via a generic interface, but nasty quirks are hidden from the programmer.

GNU Libtool's consistent interface is reassuring... users don't need to read obscure documentation in order to have their favorite source package build shared libraries.  They just run your package configure script (or equivalent), and libtool does all the dirty work.

There are several examples throughout this document.  All assume the same environment: we want to build a library, libhello, in a generic way.

libhello could be a shared library, a static library, or both... whatever is available on the host system, as long as libtool has been ported to it.

This chapter explains the original design philosophy of libtool.  Feel free to skip to the next chapter, unless you are interested in history, or want to write code to extend libtool in a consistent way.

Motivation for writing libtool
==============================

Since early 1995, several different GNU developers have recognized the importance of having shared library support for their packages.  The primary motivation for such a change is to encourage modularity and reuse of code (both conceptually and physically) in GNU programs.

Such a demand means that the way libraries are built in GNU packages needs to be general, to allow for any library type the package installer might want.  The problem is compounded by the absence of a standard procedure for creating shared libraries on different platforms.

The following sections outline the major issues facing shared library support in GNU, and how shared library support could be standardized with libtool.

The following specifications were used in developing and evaluating this system:

 1. The system must be as elegant as possible.

 2. The system must be fully integrated with the GNU Autoconf and Automake utilities, so that it will be easy for GNU maintainers to use.  However, the system must not require these tools, so that it can be used by non-GNU packages.

 3. Portability to other (non-GNU) architectures and tools is desirable.

Implementation issues
=====================

The following issues need to be addressed in any reusable shared library system, specifically libtool:

 1. The package installer should be able to control what sort of libraries are built.

 2. It can be tricky to run dynamically linked programs whose libraries have not yet been installed.  LD_LIBRARY_PATH must be set properly (if it is supported), or programs fail to run.

 3. The system must operate consistently even on hosts which don't support shared libraries.

 4. The commands required to build shared libraries may differ wildly from host to host.  These need to be determined at configure time in a consistent way.

 5. It is not always obvious with which suffix a shared library should be installed.  This makes it difficult for Makefile rules, since they generally assume that file names are the same from host to host.

 6. The system needs a simple library version number abstraction, so that shared libraries can be upgraded in place.  The programmer should be informed how to design the interfaces to the library to maximize binary compatibility.

 7. The install Makefile target should warn the package installer to set the proper environment variables (LD_LIBRARY_PATH or equivalent), or run ldconfig.

Other implementations
=====================

Even before libtool was developed, many free software packages built and installed their own shared libraries.  At first, these packages were examined to avoid reinventing existing features.

Now it is clear that none of these packages have documented the details of shared library systems that libtool requires.  So, other packages have been more or less abandoned as influences.

A postmortem analysis of other implementations
==============================================

In all fairness, each of the implementations that were examined do the job that they were intended to do, for a number of different host systems.  However, none of these solutions seem to function well as a generalized, reusable component.

Most were too complex to use (much less modify) without understanding exactly what the implementation does, and they were generally not documented.

The main difficulty is that different vendors have different views of what libraries are, and none of the packages which were examined seemed to be confident enough to settle on a single paradigm that just works.

Ideally, libtool would be a standard that would be implemented as series of extensions and modifications to existing library systems to make them work consistently.  However, it is not an easy task to convince operating system developers to mend their evil ways, and people want to build shared libraries right now, even on buggy, broken, confused operating systems.

For this reason, libtool was designed as an independent shell script. It isolates the problems and inconsistencies in library building that plague Makefile writers by wrapping the compiler suite on different platforms with a consistent, powerful interface.

With luck, libtool will be useful to and used by the GNU community, and that the lessons that were learned in writing it will be taken up by designers of future library systems.

The libtool paradigm
********************

At first, libtool was designed to support an arbitrary number of library object types.  After libtool was ported to more platforms, a new paradigm gradually developed for describing the relationship between libraries and programs.

In summary, ``libraries are programs with multiple entry points, and more formally defined interfaces.''

Version 0.7 of libtool was a complete redesign and rewrite of libtool to reflect this new paradigm.  So far, it has proved to be successful: libtool is simpler and more useful than before.

The best way to introduce the libtool paradigm is to contrast it with the paradigm of existing library systems, with examples from each.  It is a new way of thinking, so it may take a little time to absorb, but when you understand it, the world becomes simpler.

Using libtool
*************

It makes little sense to talk about using libtool in your own packages until you have seen how it makes your life simpler.  The examples in this chapter introduce the main features of libtool by comparing the standard library building procedure to libtool's operation on two different platforms:

a23
     An Ultrix 4.2 platform with only static libraries.

burger
     A NetBSD/i386 1.2 platform with shared libraries.

You can follow these examples on your own platform, using the preconfigured libtool script that was installed with libtool (see Configuring).

Source files for the following examples are taken from the demo subdirectory of the libtool distribution.  Assume that we are building a library, libhello, out of the files foo.c and hello.c.

Note that the foo.c source file uses the cos math library function, which is usually found in the standalone math library, and not the C library (see Trigonometric Functions (The GNU C Library Reference Manual)).  So, we need to add -lm to the end of the link line whenever we link foo.o or foo.lo into an executable or a library (see Inter-library dependencies).

The same rule applies whenever you use functions that don't appear in the standard C library... you need to add the appropriate -lNAME flag to the end of the link line when you link against those objects.

After we have built that library, we want to create a program by linking main.o against libhello.

Creating object files
=====================

To create an object file from a source file, the compiler is invoked with the `-c' flag (and any other desired flags):

     burger$ gcc -g -O -c main.c
     burger$

The above compiler command produces an object file, main.o, from the source file main.c.

For most library systems, creating object files that become part of a static library is as simple as creating object files that are linked to form an executable:

     burger$ gcc -g -O -c foo.c
     burger$ gcc -g -O -c hello.c
     burger$

Shared libraries, however, may only be built from position-independent code (PIC).  So, special flags must be passed to the compiler to tell it to generate PIC rather than the standard position-dependent code.

Since this is a library implementation detail, libtool hides the complexity of PIC compiler flags by using separate library object files (which end in .lo instead of .o).  On systems without shared libraries (or without special PIC compiler flags), these library object files are identical to ``standard'' object files.

To create library object files for foo.c and hello.c, simply invoke libtool with the standard compilation command as arguments (see Compile mode):

     a23$ libtool --mode=compile gcc -g -O -c foo.c
     gcc -g -O -c foo.c
     echo timestamp > foo.lo
     a23$ libtool --mode=compile gcc -g -O -c hello.c
     gcc -g -O -c hello.c
     echo timestamp > hello.lo
     a23$

Note that libtool creates two files for each invocation.  The .lo file is a library object, which may be built into a shared library, and the .o file is a standard object file.  On a23, the library objects are just timestamps, because only static libraries are supported.

On shared library systems, libtool automatically inserts the PIC generation flags into the compilation command, so that the library object and the standard object differ:

     burger$ libtool --mode=compile gcc -g -O -c foo.c
     gcc -g -O -c -fPIC -DPIC foo.c
     mv -f foo.o foo.lo
     gcc -g -O -c foo.c >/dev/null 2>&1
     burger$ libtool --mode=compile gcc -g -O -c hello.c
     gcc -g -O -c -fPIC -DPIC hello.c
     mv -f hello.o hello.lo
     gcc -g -O -c hello.c >/dev/null 2>&1
     burger$

Notice that the second run of GCC has its output discarded.  This is done so that compiler warnings aren't annoyingly duplicated.

Linking libraries
=================

Without libtool, the programmer would invoke the ar command to create a static library:

     burger$ ar cru libhello.a hello.o foo.o
     burger$

But of course, that would be too simple, so many systems require that you run the ranlib command on the resulting library (to give it better karma, or something):

     burger$ ranlib libhello.a
     burger$

It seems more natural to use the C compiler for this task, given libtool's ``libraries are programs'' approach.  So, on platforms without shared libraries, libtool simply acts as a wrapper for the system ar (and possibly ranlib) commands.

Again, the libtool library name differs from the standard name (it has a .la suffix instead of a .a suffix).  The arguments to libtool are the same ones you would use to produce an executable named libhello.la with your compiler (see Link mode):

     a23$ libtool --mode=link gcc -g -O -o libhello.la foo.o hello.o
     libtool: cannot build libtool library `libhello.la' from non-libtool \
                     objects
     a23$

Aha!  Libtool caught a common error... trying to build a library from standard objects instead of library objects.  This doesn't matter for static libraries, but on shared library systems, it is of great importance.

So, let's try again, this time with the library object files.  Remember also that we need to add -lm to the link command line because foo.c uses the cos math library function (see Using libtool).

Another complication in building shared libraries is that we need to specify the path to the directory in which they (eventually) will be installed (in this case, /usr/local/lib) (If you don't specify an rpath, then libtool builds a libtool convenience archive, not a shared library (see Static libraries).):

     a23$ libtool --mode=link gcc -g -O -o libhello.la foo.lo hello.lo \
                     -rpath /usr/local/lib -lm
     mkdir .libs
     ar cru .libs/libhello.a foo.o hello.o
     ranlib .libs/libhello.a
     creating libhello.la
     a23$

Now, let's try the same trick on the shared library platform:

     burger$ libtool --mode=link gcc -g -O -o libhello.la foo.lo hello.lo \
                     -rpath /usr/local/lib -lm
     mkdir .libs
     ld -Bshareable -o .libs/libhello.so.0.0 foo.lo hello.lo -lm
     ar cru .libs/libhello.a foo.o hello.o
     ranlib .libs/libhello.a
     creating libhello.la
     burger$

Now that's significantly cooler... libtool just ran an obscure ld command to create a shared library, as well as the static library.

Note how libtool creates extra files in the .libs subdirectory, rather than the current directory.  This feature is to make it easier to clean up the build directory, and to help ensure that other programs fail horribly if you accidentally forget to use libtool when you should.

Linking executables
===================

If you choose at this point to install the library (put it in a permanent location) before linking executables against it, then you don't need to use libtool to do the linking.  Simply use the appropriate -L and -l flags to specify the library's location.

Some system linkers insist on encoding the full directory name of each shared library in the resulting executable.  Libtool has to work around this misfeature by special magic to ensure that only permanent directory names are put into installed executables.

The importance of this bug must not be overlooked: it won't cause programs to crash in obvious ways.  It creates a security hole, and possibly even worse, if you are modifying the library source code after you have installed the package, you will change the behaviour of the installed programs!

So, if you want to link programs against the library before you install it, you must use libtool to do the linking.

Here's the old way of linking against an uninstalled library:

     burger$ gcc -g -O -o hell.old main.o libhello.a -lm
     burger$

Libtool's way is almost the same (However, you should avoid using -L or -l flags to link against an uninstalled libtool library.  Just specify the relative path to the .la file, such as ../intl/libintl.la.  This is a design decision to eliminate any ambiguity when linking against uninstalled shared libraries.) (see Link mode):

     a23$ libtool --mode=link gcc -g -O -o hell main.o libhello.la -lm
     gcc -g -O -o hell main.o ./.libs/libhello.a -lm
     a23$

That looks too simple to be true.  All libtool did was transform libhello.la to ./.libs/libhello.a, but remember that a23 has no shared libraries.

On burger the situation is different:

     burger$ libtool --mode=link gcc -g -O -o hell main.o libhello.la -lm
     gcc -g -O -o .libs/hell main.o -L./.libs -R/usr/local/lib -lhello -lm
     creating hell
     burger$

Now assume libhello.la had already been installed, and you want to link a new program with it.  You could figure out where it lives by yourself, then run:

     burger$ gcc -g -O -o test test.o -L/usr/local/lib -lhello

However, unless /usr/local/lib is in the standard library search path, you won't be able to run test.  However, if you use libtool to link the already-installed libtool library, it will do The Right Thing (TM) for you:

     burger$ libtool --mode=link gcc -g -O -o test \
                     test.o /usr/local/lib/libhello.la
     gcc -g -O -o .libs/test test.o -Wl,--rpath
     -Wl,/usr/local/lib /usr/local/lib/libhello.a -lm
     creating test
     burger$

Note that libtool added the necessary run-time path flag, as well as -lm, the library libhello.la depended upon.  Nice, huh?

Since libtool created a wrapper script, you should use libtool to install it and debug it too.  However, since the program does not depend on any uninstalled libtool library, it is probably usable even without the wrapper script.  Libtool could probably be made smarter to avoid the creation of the wrapper script in this case, but this is left as an exercise for the reader.

Notice that the executable, hell, was actually created in the .libs subdirectory.  Then, a wrapper script was created in the current directory.

On NetBSD 1.2, libtool encodes the installation directory of libhello, by using the -R/usr/local/lib compiler flag. Then, the wrapper script guarantees that the executable finds the correct shared library (the one in ./.libs) until it is properly installed.

Let's compare the two different programs:

     burger$ time ./hell.old
     Welcome to GNU Hell!
     ** This is not GNU Hello.  There is no built-in mail reader. **
             0.21 real         0.02 user         0.08 sys
     burger$ time ./hell
     Welcome to GNU Hell!
     ** This is not GNU Hello.  There is no built-in mail reader. **
             0.63 real         0.09 user         0.59 sys
     burger$

The wrapper script takes significantly longer to execute, but at least the results are correct, even though the shared library hasn't been installed yet.

So, what about all the space savings that shared libraries are supposed to yield?

     burger$ ls -l hell.old libhello.a
     -rwxr-xr-x  1 gord  gord  15481 Nov 14 12:11 hell.old
     -rw-r--r--  1 gord  gord   4274 Nov 13 18:02 libhello.a
     burger$ ls -l .libs/hell .libs/libhello.*
     -rwxr-xr-x  1 gord  gord  11647 Nov 14 12:10 .libs/hell
     -rw-r--r--  1 gord  gord   4274 Nov 13 18:44 .libs/libhello.a
     -rwxr-xr-x  1 gord  gord  12205 Nov 13 18:44 .libs/libhello.so.0.0
     burger$

Well, that sucks.  Maybe I should just scrap this project and take up basket weaving.

Actually, it just proves an important point: shared libraries incur overhead because of their (relative) complexity.  In this situation, the price of being dynamic is eight kilobytes, and the payoff is about four kilobytes.  So, having a shared libhello won't be an advantage until we link it against at least a few more programs.

Debugging executables
=====================

If hell was a complicated program, you would certainly want to test and debug it before installing it on your system.  In the above section, you saw how the libtool wrapper script makes it possible to run the program directly, but unfortunately, this mechanism interferes with the debugger:

     burger$ gdb hell
     GDB is free software and you are welcome to distribute copies of it
      under certain conditions; type "show copying" to see the conditions.
     There is no warranty for GDB; type "show warranty" for details.
     GDB 4.16 (i386-unknown-netbsd), (C) 1996 Free Software Foundation, Inc.

     "hell": not in executable format: File format not recognized

     (gdb) quit
     burger$

Sad.  It doesn't work because GDB doesn't know where the executable lives.  So, let's try again, by invoking GDB directly on the executable:

     burger$ gdb .libs/hell
     trick:/home/src/libtool/demo$ gdb .libs/hell
     GDB is free software and you are welcome to distribute copies of it
      under certain conditions; type "show copying" to see the conditions.
     There is no warranty for GDB; type "show warranty" for details.
     GDB 4.16 (i386-unknown-netbsd), (C) 1996 Free Software Foundation, Inc.
     (gdb) break main
     Breakpoint 1 at 0x8048547: file main.c, line 29.
     (gdb) run
     Starting program: /home/src/libtool/demo/.libs/hell
     /home/src/libtool/demo/.libs/hell: can't load library 'libhello.so.2'

     Program exited with code 020.
     (gdb) quit
     burger$

Argh.  Now GDB complains because it cannot find the shared library that hell is linked against.  So, we must use libtool in order to properly set the library path and run the debugger.  Fortunately, we can forget all about the .libs directory, and just run it on the executable wrapper (see Execute mode):

     burger$ libtool --mode=execute gdb hell
     GDB is free software and you are welcome to distribute copies of it
      under certain conditions; type "show copying" to see the conditions.
     There is no warranty for GDB; type "show warranty" for details.
     GDB 4.16 (i386-unknown-netbsd), (C) 1996 Free Software Foundation, Inc.
     (gdb) break main
     Breakpoint 1 at 0x8048547: file main.c, line 29.
     (gdb) run
     Starting program: /home/src/libtool/demo/.libs/hell

     Breakpoint 1, main (argc=1, argv=0xbffffc40) at main.c:29
     29	  printf ("Welcome to GNU Hell!\n");
     (gdb) quit
     The program is running.  Quit anyway (and kill it)? (y or n) y
     burger$

Installing libraries
====================

Installing libraries on a non-libtool system is quite straightforward... just copy them into place: (Don't accidentally strip the libraries, though, or they will be unusable.)

     burger$ su
     Password: ********
     burger# cp libhello.a /usr/local/lib/libhello.a
     burger#

Oops, don't forget the ranlib command:

     burger# ranlib /usr/local/lib/libhello.a
     burger#

Libtool installation is quite simple, as well.  Just use the install or cp command that you normally would (see Install mode):

     a23# libtool --mode=install cp libhello.la /usr/local/lib/libhello.la
     cp libhello.la /usr/local/lib/libhello.la
     cp .libs/libhello.a /usr/local/lib/libhello.a
     ranlib /usr/local/lib/libhello.a
     a23#

Note that the libtool library libhello.la is also installed, to help libtool with uninstallation (see Uninstall mode) and linking (see Linking executables) and to help programs with dlopening (see Dlopened modules).

Here is the shared library example:

     burger# libtool --mode=install install -c libhello.la \
                     /usr/local/lib/libhello.la
     install -c .libs/libhello.so.0.0 /usr/local/lib/libhello.so.0.0
     install -c libhello.la /usr/local/lib/libhello.la
     install -c .libs/libhello.a /usr/local/lib/libhello.a
     ranlib /usr/local/lib/libhello.a
     burger#

It is safe to specify the -s (strip symbols) flag if you use a BSD-compatible install program when installing libraries. Libtool will either ignore the -s flag, or will run a program that will strip only debugging and compiler symbols from the library.

Once the libraries have been put in place, there may be some additional configuration that you need to do before using them.  First, you must make sure that where the library is installed actually agrees with the -rpath flag you used to build it.

Then, running libtool -n --mode=finish LIBDIR can give you further hints on what to do (see Finish mode):

     burger# libtool -n --mode=finish /usr/local/lib
     PATH="$PATH:/sbin" ldconfig -m /usr/local/lib
     -----------------------------------------------------------------
     Libraries have been installed in:
        /usr/local/lib

     To link against installed libraries in a given directory, LIBDIR,
     you must use the `-LLIBDIR' flag during linking.

      You will also need to do one of the following:
        - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
          during execution
        - add LIBDIR to the `LD_RUN_PATH' environment variable
          during linking
        - use the `-RLIBDIR' linker flag

     See any operating system documentation about shared libraries for
     more information, such as the ld and ld.so manual pages.
     -----------------------------------------------------------------
     burger#

After you have completed these steps, you can go on to begin using the installed libraries.  You may also install any executables that depend on libraries you created.

Installing executables
======================

If you used libtool to link any executables against uninstalled libtool libraries (see Linking executables), you need to use libtool to install the executables after the libraries have been installed (see Installing libraries).

So, for our Ultrix example, we would run:

     a23# libtool install -c hell /usr/local/bin/hell
     install -c hell /usr/local/bin/hell
     a23#

On shared library systems, libtool just ignores the wrapper script and installs the correct binary:

     burger# libtool install -c hell /usr/local/bin/hell
     install -c .libs/hell /usr/local/bin/hell
     burger#

Linking static libraries
========================

Why return to ar and ranlib silliness when you've had a taste of libtool?  Well, sometimes it is desirable to create a static archive that can never be shared.  The most frequent case is when you have a set of object files that you use to build several different programs.  You can create a ``convenience library'' out of those objects, and link programs with the library, instead of listing all object files for every program.  This technique is often used to overcome GNU automake's lack of support for linking object files built from sources in other directories, because it supports linking with libraries from other directories.  This limitation applies to GNU automake up to release 1.4; newer releases should support sources in other directories.

If you just want to link this convenience library into programs, then you could just ignore libtool entirely, and use the old ar and ranlib commands (or the corresponding GNU automake _LIBRARIES rules).  You can even install a convenience library (but you probably don't want to) using libtool:

     burger$ libtool --mode=install ./install-sh -c libhello.a \
                     /local/lib/libhello.a
     ./install-sh -c libhello.a /local/lib/libhello.a
     ranlib /local/lib/libhello.a
     burger$

Using libtool for static library installation protects your library from being accidentally stripped (if the installer used the -s flag), as well as automatically running the correct ranlib command.

But libtool libraries are more than just collections of object files: they can also carry library dependency information, which old archives do not.  If you want to create a libtool static convenience library, you can omit the -rpath flag and use -static to indicate that you're only interested in a static library.  When you link a program with such a library, libtool will actually link all object files and dependency libraries into the program.

If you omit both -rpath and -static, libtool will create a convenience library that can be used to create other libtool libraries, even shared ones.  Just like in the static case, the library behaves as an alias to a set of object files and dependency libraries, but in this case the object files are suitable for inclusion in shared libraries.  But be careful not to link a single convenience library, directly or indirectly, into a single program or library, otherwise you may get errors about symbol redefinitions.

When GNU automake is used, you should use noinst_LTLIBRARIES instead of lib_LTLIBRARIES for convenience libraries, so that the -rpath option is not passed when they are linked.

As a rule of thumb, link a libtool convenience library into at most one libtool library, and never into a program, and link libtool static convenience libraries only into programs, and only if you need to carry library dependency information to the user of the static convenience library.

Another common situation where static linking is desirable is in creating a standalone binary.  Use libtool to do the linking and add the -all-static flag.

Invoking libtool
****************

The libtool program has the following synopsis:

     libtool [OPTION]... [MODE-ARG]...

and accepts the following options:

--config
     Display libtool configuration variables and exit.

--debug
     Dump a trace of shell script execution to standard output.  This produces a lot of output, so you may wish to pipe it to less (or more) or redirect to a file.

-n
--dry-run
     Don't create, modify, or delete any files, just show what commands would be executed by libtool.

--features
     Display basic configuration options.  This provides a way for packages to determine whether shared or static libraries will be built.

--tag=TAG
     Use configuration variables from tag TAG (see Tags).

--preserve-dup-deps
     Do not remove duplicate dependencies in libraries.  When building packages with static libraries, the libraries may depend circularly on each other (shared libs can too, but for those it doesn't matter), so there are situations, where -la -lb -la is required, and the second -la may not be stripped or the link will fail.  In cases where these duplications are required, this option will preserve them, only stripping the libraries that libtool knows it can safely.

--finish
     Same as --mode=finish.

--help
     Display a help message and exit.  If --mode=MODE is specified, then detailed help for MODE is displayed.

--mode=MODE
     Use MODE as the operation mode.  If not specified, an attempt is made to infer the operation mode from the MODE-ARGS.  Not specifying the MODE is currently deprecated, as there are too many situations where it is not possible to guess.  Future versions of Libtool will require that MODE be explicitly set.

     MODE must be set to one of the following:

     compile
          Compile a source file into a libtool object.

     execute
          Automatically set the library path so that another program can use uninstalled libtool-generated programs or libraries.

     finish
          Complete the installation of libtool libraries on the system.

     install
          Install libraries or executables.

     link
          Create a library or an executable.

     uninstall
          Delete installed libraries or executables.

     clean
          Delete uninstalled libraries or executables.

--version
     Print libtool version information and exit.

The MODE-ARGS are a variable number of arguments, depending on the selected operation mode.  In general, each MODE-ARG is interpreted by programs libtool invokes, rather than libtool itself.

Compile mode
============

For compile mode, MODE-ARGS is a compiler command to be used in creating a `standard' object file.  These arguments should begin with the name of the C compiler, and contain the -c compiler flag so that only an object file is created.

Libtool determines the name of the output file by removing the directory component from the source file name, then substituting the source code suffix (e.g. .c for C source code) with the library object suffix, .lo.

If shared libraries are being built, any necessary PIC generation flags are substituted into the compilation command.  You can pass link specific flags to the compiler driver using -XCClinker FLAG or pass linker flags with -Wl,FLAG and -Xlinker FLAG. You can also pass compile specific flags using -Wc,FLAG and -Xcompiler FLAG.

If both PIC and non-PIC objects are being built, libtool will normally suppress the compiler output for the PIC object compilation to save showing very similar, if not identical duplicate output for each object.  If the -no-suppress option is given in compile mode, libtool will show the compiler output for both objects.

If the -static option is given, then a .o file is built, even if libtool was configured with --disable-static.

Note that the -o option is now fully supported.  It is emulated on the platforms that don't support it (by locking and moving the objects), so it is really easy to use libtool, just with minor modifications to your Makefiles. Typing for example

     libtool gcc -c foo/x.c -o foo/x.lo

will do what you expect.

Note, however, that, if the compiler does not support -c and -o, it is impossible to compile foo/x.c without overwriting an existing ./x.o.  Therefore, if you do have a source file ./x.c, make sure you introduce dependencies in your Makefile to make sure ./x.o (or ./x.lo) is re-created after any sub-directory's x.lo:

     x.o x.lo: foo/x.lo bar/x.lo

This will also ensure that make won't try to use a temporarily corrupted x.o to create a program or library.  It may cause needless recompilation on platforms that support -c and -o together, but it's the only way to make it safe for those that don't.

Link mode
=========

Link mode links together object files (including library objects) to form another library or to create an executable program.

MODE-ARGS consist of a command using the C compiler to create an output file (with the -o flag) from several object files.

The following components of MODE-ARGS are treated specially:

-all-static
     If OUTPUT-FILE is a program, then do not link it against any shared libraries at all.  If OUTPUT-FILE is a library, then only create a static library.

-avoid-version
     Tries to avoid versioning (see Versioning) for libraries and modules, i.e., no version information is stored and no symbolic links are created. If the platform requires versioning, this option has no effect.

-dlopen FILE
     Same as -dlpreopen FILE, if native dlopening is not supported on the host platform (see Dlopened modules) or if the program is linked with -static, -static-libtool-libs, or -all-static.  Otherwise, no effect.  If FILE is self libtool will make sure that the program can dlopen itself, either by enabling -export-dynamic or by falling back to -dlpreopen self.

-dlpreopen FILE
     Link FILE into the output program, and add its symbols to LT_PRELOADED_SYMBOLS (see Dlpreopening).  If FILE is self, the symbols of the program itself will be added to LT_PRELOADED_SYMBOLS. If FILE is force libtool will make sure that LT_PRELOADED_SYMBOLS is always defined, regardless of whether it's empty or not.

-export-dynamic
     Allow symbols from OUTPUT-FILE to be resolved with dlsym (see Dlopened modules).

-export-symbols SYMFILE
     Tells the linker to export only the symbols listed in SYMFILE. The symbol file should end in .sym and must contain the name of one symbol per line. This option has no effect on some platforms. By default all symbols are exported.

-export-symbols-regex REGEX
     Same as -export-symbols, except that only symbols matching the regular expression REGEX are exported. By default all symbols are exported.

-LLIBDIR
     Search LIBDIR for required libraries that have already been installed.

-lNAME
     OUTPUT-FILE requires the installed library libNAME. This option is required even when OUTPUT-FILE is not an executable.

-module
     Creates a library that can be dlopened (see Dlopened modules). This option doesn't work for programs. Module names don't need to be prefixed with 'lib'. In order to prevent name clashes, however, 'libname' and 'name' must not be used at the same time in your package.

-no-fast-install
     Disable fast-install mode for the executable OUTPUT-FILE.  Useful if the program won't be necessarily installed.

-no-install
     Link an executable OUTPUT-FILE that can't be installed and therefore doesn't need a wrapper script on systems that allow hardcoding of library paths.  Useful if the program is only used in the build tree, e.g., for testing or generating other files.

-no-undefined
     Declare that OUTPUT-FILE does not depend on any other libraries. Some platforms cannot create shared libraries that depend on other libraries (see Inter-library dependencies).

-o OUTPUT-FILE
     Create OUTPUT-FILE from the specified objects and libraries.

-objectlist FILE
     Use a list of object files found in FILE to specify objects.

-precious-files-regex REGEX
     Prevents removal of files from the temporary output directory whose names match this regular expression.  You might specify \.bbg?$ to keep those files created with gcc -ftest-coverage for example.

-release RELEASE
     Specify that the library was generated by release RELEASE of your package, so that users can easily tell which versions are newer than others.  Be warned that no two releases of your package will be binary compatible if you use this flag.  If you want binary compatibility, use the -version-info flag instead (see Versioning).

-rpath LIBDIR
     If OUTPUT-FILE is a library, it will eventually be installed in LIBDIR.  If OUTPUT-FILE is a program, add LIBDIR to the run-time path of the program.

-shrext SUFFIX
     If OUTPUT-FILE is a libtool library, replace the system's standard file name extension for shared libraries with SUFFIX (most systems use .so here).  This option is helpful in certain cases where an application requires that shared libraries (typically modules) have an extension other than the default one.  Please note you must supply the full file name extension including any leading dot.

-R LIBDIR
     If OUTPUT-FILE is a program, add LIBDIR to its run-time path.  If OUTPUT-FILE is a library, add -RLIBDIR to its DEPENDENCY_LIBS, so that, whenever the library is linked into a program, LIBDIR will be added to its run-time path.

-static
     If OUTPUT-FILE is a program, then do not link it against any uninstalled shared libtool libraries.  If OUTPUT-FILE is a library, then only create a static library.

-static-libtool-libs
     If OUTPUT-FILE is a program, then do not link it against any shared libtool libraries (.la files).  If OUTPUT-FILE is a library, then only create a static library.

-version-info CURRENT[:REVISION[:AGE]]
     If OUTPUT-FILE is a libtool library, use interface version information CURRENT, REVISION, and AGE to build it (see Versioning).  Do not use this flag to specify package release information, rather see the -release flag.

-version-number MAJOR[:MINOR[:REVISION]]
     If OUTPUT-FILE is a libtool library, compute interface version information so that the resulting library uses the specified major, minor and revision numbers.  This is designed to permit libtool to be used with existing projects where identical version numbers are already used across operating systems.  New projects should use the -version-info flag instead.

-Wl,FLAG
-Xlinker FLAG
     Pass a linker specific flag directly to the linker.

-XCClinker FLAG
     Pass a link specific flag to the compiler driver (CC) during linking.

If the OUTPUT-FILE ends in .la, then a libtool library is created, which must be built only from library objects (.lo files). The -rpath option is required.  In the current implementation, libtool libraries may not depend on other uninstalled libtool libraries (see Inter-library dependencies).

If the OUTPUT-FILE ends in .a, then a standard library is created using ar and possibly ranlib.

If OUTPUT-FILE ends in .o or .lo, then a reloadable object file is created from the input files (generally using ld -r). This method is often called partial linking.

Otherwise, an executable program is created.

Execute mode
============

For execute mode, the library path is automatically set, then a program is executed.

The first of the MODE-ARGS is treated as a program name, with the rest as arguments to that program.

The following components of MODE-ARGS are treated specially:

-dlopen FILE
     Add the directory containing FILE to the library path.

This mode sets the library path environment variable according to any -dlopen flags.

If any of the ARGS are libtool executable wrappers, then they are translated into the name of their corresponding uninstalled binary, and any of their required library directories are added to the library path.

Install mode
============

In install mode, libtool interprets most of the elements of MODE-ARGS as an installation command beginning with cp, or a BSD-compatible install program.

The following components of MODE-ARGS are treated specially:

-inst-prefix INST-PREFIX-DIR
     When installing into a temporary staging area, rather than the final PREFIX, this argument is used to reflect the temporary path, in much the same way automake uses DESTDIR.  For instance, if PREFIX is /usr/local, but INST-PREFIX-DIR is /tmp, then the object will be installed under /tmp/usr/local/.  If the installed object is a libtool library, then the internal fields of that library will reflect only PREFIX, not INST-PREFIX-DIR:

          # Directory that this library needs to be installed in:
          libdir='/usr/local/lib'

     not

          # Directory that this library needs to be installed in:
          libdir='/tmp/usr/local/lib'

     inst-prefix is also used to insure that if the installed object must be relinked upon installation, that it is relinked against the libraries in INST-PREFIX-DIR/PREFIX, not PREFIX.

     In truth, this option is not really intended for use when calling libtool directly; it is automatically used when libtool --mode=install calls libtool --mode=relink.  Libtool does this by analyzing the destination path given in the original libtool --mode=install command and comparing it to the expected installation path established during libtool --mode=link.

     Thus, end-users need change nothing, and automake-style make install DESTDIR=/tmp will Just Work(tm).

The rest of the MODE-ARGS are interpreted as arguments to the cp or install command.

The command is run, and any necessary unprivileged post-installation commands are also completed.

Finish mode
===========

Finish mode helps system administrators install libtool libraries so that they can be located and linked into user programs.

Each MODE-ARG is interpreted as the name of a library directory. Running this command may require superuser privileges, so the --dry-run option may be useful.

Uninstall mode
==============

Uninstall mode deletes installed libraries, executables and objects.

The first MODE-ARG is the name of the program to use to delete files (typically /bin/rm).

The remaining MODE-ARGS are either flags for the deletion program (beginning with a `-'), or the names of files to delete.

Clean mode
==========

Clean mode deletes uninstalled libraries, executables, objects and libtool's temporary files associated with them.

The first MODE-ARG is the name of the program to use to delete files (typically /bin/rm).

The remaining MODE-ARGS are either flags for the deletion program (beginning with a `-'), or the names of files to delete.

Integrating libtool with your package
*************************************

This chapter describes how to integrate libtool with your packages so that your users can install hassle-free shared libraries.

Writing Makefile rules for libtool
==================================

Libtool is fully integrated with Automake (see Introduction (The Automake Manual)), starting with Automake version 1.2.

If you want to use libtool in a regular Makefile (or Makefile.in), you are on your own.  If you're not using Automake 1.2, and you don't know how to incorporate libtool into your package you need to do one of the following:

 1. Download Automake (version 1.2 or later) from your nearest GNU mirror, install it, and start using it.

 2. Learn how to write Makefile rules by hand.  They're sometimes complex, but if you're clever enough to write rules for compiling your old libraries, then you should be able to figure out new rules for libtool libraries (hint: examine the Makefile.in in the demo subdirectory of the libtool distribution... note especially that it was automatically generated from the Makefile.am by Automake).

Using Automake with libtool
===========================

Libtool library support is implemented under the LTLIBRARIES primary.

Here are some samples from the Automake Makefile.am in the libtool distribution's demo subdirectory.

First, to link a program against a libtool library, just use the program_LDADD variable:

     bin_PROGRAMS = hell hell.debug

     # Build hell from main.c and libhello.la
     hell_SOURCES = main.c
     hell_LDADD = libhello.la

     # Create an easier-to-debug version of hell.
     hell_debug_SOURCES = main.c
     hell_debug_LDADD = libhello.la
     hell_debug_LDFLAGS = -static

The flags -dlopen or -dlpreopen (see Link mode) would fit better in the PROGRAM_LDADD variable.  Unfortunately, GNU automake, up to release 1.4, doesn't accept these flags in a PROGRAM_LDADD variable, so you have the following alternatives:

  * add them to PROGRAM_LDFLAGS, and list the libraries in PROGRAM_DEPENDENCIES, then wait for a release of GNU automake that accepts these flags where they belong;

  * surround the flags between quotes, but then you must set PROGRAM_DEPENDENCIES too:

          program_LDADD = "-dlopen" libfoo.la
          program_DEPENDENCIES = libfoo.la

  * set and AC_SUBST variables DLOPEN and DLPREOPEN in configure.in and use @DLOPEN@ and @DLPREOPEN@ as replacements for the explicit flags -dlopen and -dlpreopen in program_LDADD.  Automake will discard AC_SUBSTed variables from dependencies, so it will behave exactly as we expect it to behave when it accepts these flags in program_LDADD.  But hey!, this is ugly!

You may use the program_LDFLAGS variable to stuff in any flags you want to pass to libtool while linking program (such as -static to avoid linking uninstalled shared libtool libraries).

Building a libtool library is almost as trivial... note the use of libhello_la_LDFLAGS to pass the -version-info (see Versioning) option to libtool:

     # Build a libtool library, libhello.la for installation in libdir.
     lib_LTLIBRARIES = libhello.la
     libhello_la_SOURCES = hello.c foo.c
     libhello_la_LDFLAGS = -version-info 3:12:1

The -rpath option is passed automatically by Automake (except for libraries listed as noinst_LTLIBRARIES), so you should not specify it.

See The Automake Manual, for more information.

Configuring libtool
===================

Libtool requires intimate knowledge of your compiler suite and operating system in order to be able to create shared libraries and link against them properly.  When you install the libtool distribution, a system-specific libtool script is installed into your binary directory.

However, when you distribute libtool with your own packages (see Distributing), you do not always know which compiler suite and operating system are used to compile your package.

For this reason, libtool must be configured before it can be used.  This idea should be familiar to anybody who has used a GNU configure script.  configure runs a number of tests for system features, then generates the Makefiles (and possibly a config.h header file), after which you can run make and build the package.

Libtool adds its own tests to your configure script in order to generate a libtool script for the installer's host machine.

The AC_PROG_LIBTOOL macro
-------------------------

If you are using GNU Autoconf (or Automake), you should add a call to AC_PROG_LIBTOOL to your configure.in file.  This macro adds many new tests to the configure script so that the generated libtool script will understand the characteristics of the host:

 -- Macro: AC_PROG_LIBTOOL
 -- Macro: AM_PROG_LIBTOOL
     Add support for the --enable-shared and --disable-shared configure flags. (AC_PROG_LIBTOOL requires that you define the Makefile variable top_builddir in your Makefile.in.  Automake does this automatically, but Autoconf users should set it to the relative path to the top of your build directory (../.., for example).)  AM_PROG_LIBTOOL was the old name for this macro, and although supported at the moment is deprecated.

     By default, this macro turns on shared libraries if they are available, and also enables static libraries if they don't conflict with the shared libraries.  You can modify these defaults by calling either the AC_DISABLE_SHARED or AC_DISABLE_STATIC macros:

          # Turn off shared libraries during beta-testing, since they
          # make the build process take too long.
          AC_DISABLE_SHARED
          AC_PROG_LIBTOOL

     The user may specify modified forms of the configure flags --enable-shared and --enable-static to choose whether shared or static libraries are built based on the name of the package. For example, to have shared bfd and gdb libraries built, but not shared libg++, you can run all three configure scripts as follows:

          trick$ ./configure --enable-shared=bfd,gdb

     In general, specifying --enable-shared=PKGS is the same as configuring with --enable-shared every package named in the comma-separated PKGS list, and every other package with --disable-shared.  The --enable-static=PKGS flag behaves similarly, but it uses --enable-static and --disable-static. The same applies to the --enable-fast-install=PKGS flag, which uses --enable-fast-install and --disable-fast-install.

     The package name default matches any packages which have not set their name in the PACKAGE environment variable.

     This macro also sets the shell variable LIBTOOL_DEPS, that you can use to automatically update the libtool script if it becomes out-of-date.  In order to do that, add to your configure.in:

          AC_PROG_LIBTOOL
          AC_SUBST(LIBTOOL_DEPS)

     and, to Makefile.in or Makefile.am:

          LIBTOOL_DEPS = @LIBTOOL_DEPS@
          libtool: $(LIBTOOL_DEPS)
                  $(SHELL) ./config.status --recheck

     If you are using GNU automake, you can omit the assignment, as automake will take care of it.  You'll obviously have to create some dependency on libtool.

 -- Macro: AC_LIBTOOL_DLOPEN
     Enable checking for dlopen support. This macro should be used if the package makes use of the -dlopen and -dlpreopen flags, otherwise libtool will assume that the system does not support dlopening. The macro must be called before AC_PROG_LIBTOOL.

 -- Macro: AC_LIBTOOL_WIN32_DLL
     This macro should be used if the package has been ported to build clean dlls on win32 platforms.  Usually this means that any library data items are exported with __declspec(dllexport) and imported with __declspec(dllimport).  If this macro is not used, libtool will assume that the package libraries are not dll clean and will build only static libraries on win32 hosts.

     This macro must be called before AC_PROG_LIBTOOL, and provision must be made to pass -no-undefined to libtool in link mode from the package Makefile.  Naturally, if you pass -no-undefined, you must ensure that all the library symbols really are defined at link time!

 -- Macro: AC_DISABLE_FAST_INSTALL
     Change the default behaviour for AC_PROG_LIBTOOL to disable optimization for fast installation.  The user may still override this default, depending on platform support, by specifying --enable-fast-install.

 -- Macro: AC_DISABLE_SHARED
 -- Macro: AM_DISABLE_SHARED
     Change the default behaviour for AC_PROG_LIBTOOL to disable shared libraries.  The user may still override this default by specifying --enable-shared.

 -- Macro: AC_DISABLE_STATIC
 -- Macro: AM_DISABLE_STATIC
     Change the default behaviour for AC_PROG_LIBTOOL to disable static libraries.  The user may still override this default by specifying --enable-static.

The tests in AC_PROG_LIBTOOL also recognize the following environment variables:

 -- Variable: CC
     The C compiler that will be used by the generated libtool.  If this is not set, AC_PROG_LIBTOOL will look for gcc or cc.

 -- Variable: CFLAGS
     Compiler flags used to generate standard object files.  If this is not set, AC_PROG_LIBTOOL will not use any such flags.  It affects only the way AC_PROG_LIBTOOL runs tests, not the produced libtool.

 -- Variable: CPPFLAGS
     C preprocessor flags.  If this is not set, AC_PROG_LIBTOOL will not use any such flags.  It affects only the way AC_PROG_LIBTOOL runs tests, not the produced libtool.

 -- Variable: LD
     The system linker to use (if the generated libtool requires one). If this is not set, AC_PROG_LIBTOOL will try to find out what is the linker used by CC.

 -- Variable: LDFLAGS
     The flags to be used by libtool when it links a program.  If this is not set, AC_PROG_LIBTOOL will not use any such flags.  It affects only the way AC_PROG_LIBTOOL runs tests, not the produced libtool.

 -- Variable: LIBS
     The libraries to be used by AC_PROG_LIBTOOL when it links a program.  If this is not set, AC_PROG_LIBTOOL will not use any such flags.  It affects only the way AC_PROG_LIBTOOL runs tests, not the produced libtool.

 -- Variable: NM
     Program to use rather than checking for nm.

 -- Variable: RANLIB
     Program to use rather than checking for ranlib.

 -- Variable: LN_S
     A command that creates a link of a program, a soft-link if possible, a hard-link otherwise.  AC_PROG_LIBTOOL will check for a suitable program if this variable is not set.

 -- Variable: DLLTOOL
     Program to use rather than checking for dlltool.  Only meaningful for Cygwin/MS-Windows.

 -- Variable: OBJDUMP
     Program to use rather than checking for objdump.  Only meaningful for Cygwin/MS-Windows.

 -- Variable: AS
     Program to use rather than checking for as.  Only used on Cygwin/MS-Windows at the moment.

When you invoke the libtoolize program (see Invoking libtoolize), it will tell you where to find a definition of AC_PROG_LIBTOOL.  If you use Automake, the aclocal program will automatically add AC_PROG_LIBTOOL support to your configure script.

Nevertheless, it is advisable to include a copy of libtool.m4 in acinclude.m4, so that, even if aclocal.m4 and configure are rebuilt for any reason, the appropriate libtool macros will be used.  The alternative is to hope the user will have a compatible version of libtool.m4 installed and accessible for aclocal.  This may lead to weird errors when versions don't match.

Including libtool in your package
=================================

In order to use libtool, you need to include the following files with your package:

config.guess
     Attempt to guess a canonical system name.

config.sub
     Canonical system name validation subroutine script.

install-sh
     BSD-compatible install replacement script.

ltmain.sh
     A generic script implementing basic libtool functionality.

Note that the libtool script itself should not be included with your package.  See Configuring.

You should use the libtoolize program, rather than manually copying these files into your package.  Note however, that install-sh is not copied by libtoolize; if you use Automake, it will take care of that, otherwise you may obtain a copy from the package data directory of the installed Libtool.  This may change in a future Libtool version.

Invoking libtoolize
-------------------

The libtoolize program provides a standard way to add libtool support to your package.  In the future, it may implement better usage checking, or other features to make libtool even easier to use.

The libtoolize program has the following synopsis:

     libtoolize [OPTION]...

and accepts the following options:

--automake
     Work silently, and assume that Automake libtool support is used.

     libtoolize --automake is used by Automake to add libtool files to your package, when AC_PROG_LIBTOOL appears in your configure.in.

--copy
-c
     Copy files from the libtool data directory rather than creating symlinks.

--debug
     Dump a trace of shell script execution to standard output.  This produces a lot of output, so you may wish to pipe it to less (or more) or redirect to a file.

--dry-run
-n
     Don't run any commands that modify the file system, just print them out.

--force
-f
     Replace existing libtool files.  By default, libtoolize won't overwrite existing files.

--help
     Display a help message and exit.

--ltdl
     Install libltdl in a subdirectory of your package.

--ltdl-tar
     Add the file libltdl.tar.gz to your package.

--version
     Print libtoolize version information and exit.

If libtoolize detects an explicit call to AC_CONFIG_AUX_DIR (see The Autoconf Manual) in your configure.in, it will put the files in the specified directory.

libtoolize displays hints for adding libtool support to your package, as well.

Autoconf .o macros
------------------

The Autoconf package comes with a few macros that run tests, then set a variable corresponding to the name of an object file.  Sometimes it is necessary to use corresponding names for libtool objects.

Here are the names of variables that list libtool objects:

 -- Variable: LTALLOCA
     Substituted by AC_FUNC_ALLOCA (see The Autoconf Manual).  Is either empty, or contains alloca.lo.

 -- Variable: LTLIBOBJS
     Substituted by AC_REPLACE_FUNCS (see The Autoconf Manual), and a few other functions.

Unfortunately, the stable release of Autoconf (2.13, at the time of this writing) does not have any way for libtool to provide support for these variables.  So, if you depend on them, use the following code immediately before the call to AC_OUTPUT in your configure.in:

     LTLIBOBJS=`echo "$LIBOBJS" | sed 's/\.[^.]* /.lo /g;s/\.[^.]*$/.lo/'`
     AC_SUBST(LTLIBOBJS)
     LTALLOCA=`echo "$ALLOCA" | sed 's/\.[^.]* /.lo /g;s/\.[^.]*$/.lo/'`
     AC_SUBST(LTALLOCA)
     AC_OUTPUT(...)

Static-only libraries
=====================

When you are developing a package, it is often worthwhile to configure your package with the --disable-shared flag, or to override the defaults for AC_PROG_LIBTOOL by using the AC_DISABLE_SHARED Autoconf macro (see The AC_PROG_LIBTOOL macro).  This prevents libtool from building shared libraries, which has several advantages:

  * compilation is twice as fast, which can speed up your development cycle,

  * debugging is easier because you don't need to deal with any complexities added by shared libraries, and

  * you can see how libtool behaves on static-only platforms.

You may want to put a small note in your package README to let other developers know that --disable-shared can save them time. The following example note is taken from the GIMP (GNU Image Manipulation Program, for those who haven't taken the plunge.  See http://www.gimp.org/.) distribution README:

     The GIMP uses GNU Libtool in order to build shared libraries on a
     variety of systems. While this is very nice for making usable
     binaries, it can be a pain when trying to debug a program. For that
     reason, compilation of shared libraries can be turned off by
     specifying the --disable-shared option to configure.

Library interface versions
**************************

The most difficult issue introduced by shared libraries is that of creating and resolving runtime dependencies.  Dependencies on programs and libraries are often described in terms of a single name, such as sed.  So, one may say ``libtool depends on sed,'' and that is good enough for most purposes.

However, when an interface changes regularly, we need to be more specific: ``Gnus 5.1 requires Emacs 19.28 or above.''  Here, the description of an interface consists of a name, and a ``version number.''

Even that sort of description is not accurate enough for some purposes. What if Emacs 20 changes enough to break Gnus 5.1?

The same problem exists in shared libraries: we require a formal version system to describe the sorts of dependencies that programs have on shared libraries, so that the dynamic linker can guarantee that programs are linked only against libraries that provide the interface they require.

What are library interfaces?
============================

Interfaces for libraries may be any of the following (and more):

  * global variables: both names and types

  * global functions: argument types and number, return types, and function names

  * standard input, standard output, standard error, and file formats

  * sockets, pipes, and other inter-process communication protocol formats

Note that static functions do not count as interfaces, because they are not directly available to the user of the library.

Libtool's versioning system
===========================

Libtool has its own formal versioning system.  It is not as flexible as some, but it is definitely the simplest of the more powerful versioning systems.

Think of a library as exporting several sets of interfaces, arbitrarily represented by integers.  When a program is linked against a library, it may use any subset of those interfaces.

Libtool's description of the interfaces that a program uses is simple: it encodes the least and the greatest interface numbers in the resulting binary (FIRST-INTERFACE, LAST-INTERFACE).

The dynamic linker is guaranteed that if a library supports every interface number between FIRST-INTERFACE and LAST-INTERFACE, then the program can be relinked against that library.

Note that this can cause problems because libtool's compatibility requirements are actually stricter than is necessary.

Say libhello supports interfaces 5, 16, 17, 18, and 19, and that libtool is used to link test against libhello.

Libtool encodes the numbers 5 and 19 in test, and the dynamic linker will only link test against libraries that support every interface between 5 and 19.  So, the dynamic linker refuses to link test against libhello!

In order to eliminate this problem, libtool only allows libraries to declare consecutive interface numbers.  So, libhello can declare at most that it supports interfaces 16 through 19.  Then, the dynamic linker will link test against libhello.

So, libtool library versions are described by three integers:

current
     The most recent interface number that this library implements.

revision
     The implementation number of the CURRENT interface.

age
     The difference between the newest and oldest interfaces that this library implements.  In other words, the library implements all the interface numbers in the range from number CURRENT - AGE to CURRENT.

If two libraries have identical CURRENT and AGE numbers, then the dynamic linker chooses the library with the greater REVISION number.

Updating library version information
====================================

If you want to use libtool's versioning system, then you must specify the version information to libtool using the -version-info flag during link mode (see Link mode).

This flag accepts an argument of the form CURRENT[:REVISION[:AGE]].  So, passing -version-info 3:12:1 sets CURRENT to 3, REVISION to 12, and AGE to 1.

If either REVISION or AGE are omitted, they default to 0. Also note that AGE must be less than or equal to the CURRENT interface number.

Here are a set of rules to help you update your library version information:

 1. Start with version information of 0:0:0 for each libtool library.

 2. Update the version information only immediately before a public release of your software.  More frequent updates are unnecessary, and only guarantee that the current interface number gets larger faster.

 3. If the library source code has changed at all since the last update, then increment REVISION (C:R:A becomes C:r+1:A).

 4. If any interfaces have been added, removed, or changed since the last update, increment CURRENT, and set REVISION to 0.

 5. If any interfaces have been added since the last public release, then increment AGE.

 6. If any interfaces have been removed since the last public release, then set AGE to 0.

Never try to set the interface numbers so that they correspond to the release number of your package.  This is an abuse that only fosters misunderstanding of the purpose of library versions. Instead, use the -release flag (see Release numbers), but be warned that every release of your package will not be binary compatible with any other release.

Managing release information
============================

Often, people want to encode the name of the package release into the shared library so that it is obvious to the user which package their programs are linked against.  This convention is used especially on GNU/Linux:

     trick$ ls /usr/lib/libbfd*
     /usr/lib/libbfd.a	    /usr/lib/libbfd.so.2.7.0.2
     /usr/lib/libbfd.so
     trick$

On trick, /usr/lib/libbfd.so is a symbolic link to libbfd.so.2.7.0.2, which was distributed as a part of binutils-2.7.0.2.

Unfortunately, this convention conflicts directly with libtool's idea of library interface versions, because the library interface rarely changes at the same time that the release number does, and the library suffix is never the same across all platforms.

So, in order to accommodate both views, you can use the -release flag in order to set release information for libraries which you do not want to use -version-info.  For the libbfd example, the next release which uses libtool should be built with -release 2.9.0, which will produce the following files on GNU/Linux:

     trick$ ls /usr/lib/libbfd*
     /usr/lib/libbfd-2.9.0.so     /usr/lib/libbfd.a
     /usr/lib/libbfd.so
     trick$

In this case, /usr/lib/libbfd.so is a symbolic link to libbfd-2.9.0.so.  This makes it obvious that the user is dealing with binutils-2.9.0, without compromising libtool's idea of interface versions.

Note that this option causes a modification of the library name, so do not use it unless you want to break binary compatibility with any past library releases.  In general, you should only use -release for package-internal libraries or for ones whose interfaces change very frequently.

Tips for interface design
*************************

Writing a good library interface takes a lot of practice and thorough understanding of the problem that the library is intended to solve.

If you design a good interface, it won't have to change often, you won't have to keep updating documentation, and users won't have to keep relearning how to use the library.

Here is a brief list of tips for library interface design, which may help you in your exploits:

Plan ahead
     Try to make every interface truly minimal, so that you won't need to delete entry points very often.

Avoid interface changes
     Some people love redesigning and changing entry points just for the heck of it (note: renaming a function is considered changing an entry point).  Don't be one of those people.  If you must redesign an interface, then try to leave compatibility functions behind so that users don't need to rewrite their existing code.

Use opaque data types
     The fewer data type definitions a library user has access to, the better.  If possible, design your functions to accept a generic pointer (which you can cast to an internal data type), and provide access functions rather than allowing the library user to directly manipulate the data. That way, you have the freedom to change the data structures without changing the interface.

     This is essentially the same thing as using abstract data types and inheritance in an object-oriented system.

Use header files
     If you are careful to document each of your library's global functions and variables in header files, and include them in your library source files, then the compiler will let you know if you make any interface changes by accident (see C header files).

Use the static keyword (or equivalent) whenever possible
     The fewer global functions your library has, the more flexibility you'll have in changing them.  Static functions and variables may change forms as often as you like... your users cannot access them, so they aren't interface changes.

Be careful with array dimensions
     The number of elements in a global array is part of an interface, even if the header just declares extern int foo[];.  This is because on i386 and some other SVR4/ELF systems, when an application references data in a shared library the size of that data (whatever its type) is included in the application executable.  If you might want to change the size of an array or string then provide a pointer not the actual array.

Writing C header files
======================

Writing portable C header files can be difficult, since they may be read by different types of compilers:

C++ compilers
     C++ compilers require that functions be declared with full prototypes, since C++ is more strongly typed than C.  C functions and variables also need to be declared with the extern "C" directive, so that the names aren't mangled.  See C++ libraries, for other issues relevant to using C++ with libtool.

ANSI C compilers
     ANSI C compilers are not as strict as C++ compilers, but functions should be prototyped to avoid unnecessary warnings when the header file is #included.

non-ANSI C compilers
     Non-ANSI compilers will report errors if functions are prototyped.

These complications mean that your library interface headers must use some C preprocessor magic in order to be usable by each of the above compilers.

foo.h in the demo subdirectory of the libtool distribution serves as an example for how to write a header file that can be safely installed in a system directory.

Here are the relevant portions of that file:

     /* BEGIN_C_DECLS should be used at the beginning of your declarations,
        so that C++ compilers don't mangle their names.  Use END_C_DECLS at
        the end of C declarations. */
     #undef BEGIN_C_DECLS
     #undef END_C_DECLS
     #ifdef __cplusplus
     # define BEGIN_C_DECLS extern "C" {
     # define END_C_DECLS }
     #else
     # define BEGIN_C_DECLS /* empty */
     # define END_C_DECLS /* empty */
     #endif

     /* PARAMS is a macro used to wrap function prototypes, so that
        compilers that don't understand ANSI C prototypes still work,
        and ANSI C compilers can issue warnings about type mismatches. */
     #undef PARAMS
     #if defined (__STDC__) || defined (_AIX) \
             || (defined (__mips) && defined (_SYSTYPE_SVR4)) \
             || defined(WIN32) || defined(__cplusplus)
     # define PARAMS(protos) protos
     #else
     # define PARAMS(protos) ()
     #endif

These macros are used in foo.h as follows:

     #ifndef FOO_H
     #define FOO_H 1

     /* The above macro definitions. */
     #include "..."

     BEGIN_C_DECLS

     int foo PARAMS((void));
     int hello PARAMS((void));

     END_C_DECLS

     #endif /* !FOO_H */

Note that the #ifndef FOO_H prevents the body of foo.h from being read more than once in a given compilation.

Also the only thing that must go outside the BEGIN_C_DECLS/END_C_DECLS pair are #include lines. Strictly speaking it is only C symbol names that need to be protected, but your header files will be more maintainable if you have a single pair of of these macros around the majority of the header contents.

You should use these definitions of PARAMS, BEGIN_C_DECLS, and END_C_DECLS into your own headers.  Then, you may use them to create header files that are valid for C++, ANSI, and non-ANSI compilers (We used to recommend __P, __BEGIN_DECLS and __END_DECLS.  This was bad advice since symbols (even preprocessor macro names) that begin with an underscore are reserved for the use of the compiler.).

Do not be naive about writing portable code.  Following the tips given above will help you miss the most obvious problems, but there are definitely other subtle portability issues.  You may need to cope with some of the following issues:

  * Pre-ANSI compilers do not always support the void * generic pointer type, and so need to use char * in its place.

  * The const, inline and signed keywords are not supported by some compilers, especially pre-ANSI compilers.

  * The long double type is not supported by many compilers.

Inter-library dependencies
**************************

By definition, every shared library system provides a way for executables to depend on libraries, so that symbol resolution is deferred until runtime.

An inter-library dependency is one in which a library depends on other libraries.  For example, if the libtool library libhello uses the cos function, then it has an inter-library dependency on libm, the math library that implements cos.

Some shared library systems provide this feature in an internally-consistent way: these systems allow chains of dependencies of potentially infinite length.

However, most shared library systems are restricted in that they only allow a single level of dependencies.  In these systems, programs may depend on shared libraries, but shared libraries may not depend on other shared libraries.

In any event, libtool provides a simple mechanism for you to declare inter-library dependencies: for every library libNAME that your own library depends on, simply add a corresponding -lNAME option to the link line when you create your library.  To make an example of our libhello that depends on libm:

     burger$ libtool --mode=link gcc -g -O -o libhello.la foo.lo hello.lo \
                     -rpath /usr/local/lib -lm
     burger$

When you link a program against libhello, you don't need to specify the same -l options again: libtool will do that for you, in order to guarantee that all the required libraries are found.  This restriction is only necessary to preserve compatibility with static library systems and simple dynamic library systems.

Some platforms, such as AIX, do not even allow you this flexibility.  In order to build a shared library, it must be entirely self-contained (that is, have references only to symbols that are found in the .lo files or the specified -l libraries), and you need to specify the -no-undefined flag.  By default, libtool builds only static libraries on these kinds of platforms.

The simple-minded inter-library dependency tracking code of libtool releases prior to 1.2 was disabled because it was not clear when it was possible to link one library with another, and complex failures would occur.  A more complex implementation of this concept was re-introduced before release 1.3, but it has not been ported to all platforms that libtool supports.  The default, conservative behavior is to avoid linking one library with another, introducing their inter-dependencies only when a program is linked with them.

Dlopened modules
****************

It can sometimes be confusing to discuss dynamic linking, because the term is used to refer to two different concepts:

 1. Compiling and linking a program against a shared library, which is resolved automatically at run time by the dynamic linker.  In this process, dynamic linking is transparent to the application.

 2. The application calling functions such as dlopen, (HP-UX, to be different, uses a function named shl_load.) which load arbitrary, user-specified modules at runtime.  This type of dynamic linking is explicitly controlled by the application.

To mitigate confusion, this manual refers to the second type of dynamic linking as dlopening a module.

The main benefit to dlopening object modules is the ability to access compiled object code to extend your program, rather than using an interpreted language.  In fact, dlopen calls are frequently used in language interpreters to provide an efficient way to extend the language.

As of version VERSION, libtool provides support for dlopened modules.  However, you should indicate that your package is willing to use such support, by using the macro AC_LIBTOOL_DLOPEN in configure.in.  If this macro is not used (or it is used after AC_PROG_LIBTOOL), libtool will assume no dlopening mechanism is available, and will try to simulate it.

This chapter discusses how you as a dlopen application developer might use libtool to generate dlopen-accessible modules.

Building modules to dlopen
==========================

On some operating systems, a program symbol must be specially declared in order to be dynamically resolved with the dlsym (or equivalent) function.

Libtool provides the -export-dynamic and -module link flags (see Link mode), which do this declaration. You need to use these flags if you are linking an application program that dlopens other modules or a libtool library that will also be dlopened.

For example, if we wanted to build a shared library, libhello, that would later be dlopened by an application, we would add -module to the other link flags:

     burger$ libtool --mode=link gcc -module -o libhello.la foo.lo \
                     hello.lo -rpath /usr/local/lib -lm
     burger$

If symbols from your executable are needed to satisfy unresolved references in a library you want to dlopen you will have to use the flag -export-dynamic. You should use -export-dynamic while linking the executable that calls dlopen:

     burger$ libtool --mode=link gcc -export-dynamic -o hell-dlopener main.o
     burger$

Dlpreopening
============

Libtool provides special support for dlopening libtool object and libtool library files, so that their symbols can be resolved even on platforms without any dlopen and dlsym functions.

Consider the following alternative ways of loading code into your program, in order of increasing ``laziness'':

 1. Linking against object files that become part of the program executable, whether or not they are referenced.  If an object file cannot be found, then the linker refuses to create the executable.

 2. Declaring a static library to the linker, so that it is searched at link time in order to satisfy any undefined references in the above object files.  If the static library cannot be found, then the linker refuses to link the executable.

 3. Declaring a shared library to the runtime linker, so that it is searched at runtime in order to satisfy any undefined references in the above files.  If the shared library cannot be found, then the dynamic linker aborts the program before it runs.

 4. Dlopening a module, so that the application can resolve its own, dynamically-computed references.  If there is an error opening the module, or the module is not found, then the application can recover without crashing.

Libtool emulates -dlopen on static platforms by linking objects into the program at compile time, and creating data structures that represent the program's symbol table.

In order to use this feature, you must declare the objects you want your application to dlopen by using the -dlopen or -dlpreopen flags when you link your program (see Link mode).

 -- Structure: struct lt_dlsymlist { const char *NAME; lt_ptr ADDRESS; }
     The NAME attribute is a null-terminated character string of the symbol name, such as "fprintf".  The ADDRESS attribute is a generic pointer to the appropriate object, such as &fprintf.

 -- Variable: const lt_dlsymlist * lt_preloaded_symbols
     An array of LT_SYMBOL structures, representing all the preloaded symbols linked into the program. For each -dlpreopened file there is an element with the NAME of the file and a ADDRESS of 0, followed by all symbols exported from this file. For the executable itself the special name @PROGRAM@ is used. The last element has a NAME and ADDRESS of 0.

Some compilers may allow identifiers which are not valid in ANSI C, such as dollar signs.  Libtool only recognizes valid ANSI C symbols (an initial ASCII letter or underscore, followed by zero or more ASCII letters, digits, and underscores), so non-ANSI symbols will not appear in LT_PRELOADED_SYMBOLS.

Finding the correct name to dlopen
==================================

After a library has been linked with -module, it can be dlopened. Unfortunately, because of the variation in library names, your package needs to determine the correct file to dlopen.

The most straightforward and flexible implementation is to determine the name at runtime, by finding the installed .la file, and searching it for the following lines:

     # The name that we can dlopen.
     dlname='DLNAME'

If DLNAME is empty, then the library cannot be dlopened. Otherwise, it gives the dlname of the library.  So, if the library was installed as /usr/local/lib/libhello.la, and the DLNAME was libhello.so.3, then /usr/local/lib/libhello.so.3 should be dlopened.

If your program uses this approach, then it should search the directories listed in the LD_LIBRARY_PATH (LIBPATH on AIX, and SHLIB_PATH on HP-UX.) environment variable, as well as the directory where libraries will eventually be installed.  Searching this variable (or equivalent) will guarantee that your program can find its dlopened modules, even before installation, provided you have linked them using libtool.

Unresolved dlopen issues
========================

The following problems are not solved by using libtool's dlopen support:

  * Dlopen functions are generally only available on shared library platforms.  If you want your package to be portable to static platforms, you have to use either libltdl (see Using libltdl) or develop your own alternatives to dlopening dynamic code. Most reasonable solutions involve writing wrapper functions for the dlopen family, which do package-specific tricks when dlopening is unsupported or not available on a given platform.

  * There are major differences in implementations of the dlopen family of functions.  Some platforms do not even use the same function names (notably HP-UX, with its shl_load family).

  * The application developer must write a custom search function in order to discover the correct module filename to supply to dlopen.

Using libltdl
*************

Libtool provides a small library, called libltdl, that aims at hiding the various difficulties of dlopening libraries from programmers. It consists of a header-file and a small C source file that can be distributed with applications that need dlopening functionality.  On some platforms, whose dynamic linkers are too limited for a simple implementation of libltdl services, it requires GNU DLD, or it will only emulate dynamic linking with libtool's dlpreopening mechanism.

libltdl supports currently the following dynamic linking mechanisms:

  * dlopen (Solaris, Linux and various BSD flavors)

  * shl_load (HP-UX)

  * LoadLibrary (Win16 and Win32)

  * load_add_on (BeOS)

  * GNU DLD (emulates dynamic linking for static libraries)

  * libtool's dlpreopen (see Dlpreopening)

libltdl is licensed under the terms of the GNU Library General Public License, with the following exception:

     As a special exception to the GNU Lesser General Public License, if you distribute this file as part of a program or library that is built using GNU libtool, you may include it under the same distribution terms that you use for the rest of that program.

How to use libltdl in your programs
===================================

The libltdl API is similar to the dlopen interface of Solaris and Linux, which is very simple but powerful.

To use libltdl in your program you have to include the header file ltdl.h:

     #include <ltdl.h>

The last release of libltdl used some symbols that violated the POSIX namespace conventions.  These symbols are now deprecated, and have been replaced by those described here.  If you have code that relies on the old deprecated symbol names, defining LT_NON_POSIX_NAMESPACE before you include ltdl.h provides conversion macros.  Whichever set of symbols you use, the new api is not binary compatible with the last, so you will need to recompile your application in order to use this version of libltdl.

Note that libltdl is not threadsafe, i.e. a multithreaded application has to use a mutex for libltdl.  It was reported that GNU/Linux's glibc 2.0's dlopen with RTLD_LAZY (which libltdl uses by default) is not thread-safe, but this problem is supposed to be fixed in glibc 2.1.  On the other hand, RTLD_NOW was reported to introduce problems in multi-threaded applications on FreeBSD.  Working around these problems is left as an exercise for the reader; contributions are certainly welcome.

The following types are defined in ltdl.h:

 -- Type: lt_ptr
     lt_ptr is a generic pointer.

 -- Type: lt_dlhandle
     lt_dlhandle is a module "handle". Every lt_dlopened module has a handle associated with it.

 -- Type: lt_dlsymlist
     lt_dlsymlist is a symbol list for dlpreopened modules. This structure is described in see Dlpreopening.

libltdl provides the following functions:

 -- Function: int lt_dlinit (void)
     Initialize libltdl. This function must be called before using libltdl and may be called several times. Return 0 on success, otherwise the number of errors.

 -- Function: int lt_dlexit (void)
     Shut down libltdl and close all modules. This function will only then shut down libltdl when it was called as many times as lt_dlinit has been successfully called. Return 0 on success, otherwise the number of errors.

 -- Function: lt_dlhandle lt_dlopen (const char *FILENAME)
     Open the module with the file name FILENAME and return a handle for it.  lt_dlopen is able to open libtool dynamic modules, preloaded static modules, the program itself and native dynamic libraries.

     Unresolved symbols in the module are resolved using its dependency libraries (not implemented yet) and previously dlopened modules.  If the executable using this module was linked with the -export-dynamic flag, then the global symbols in the executable will also be used to resolve references in the module.

     If FILENAME is NULL and the program was linked with -export-dynamic or -dlopen self, lt_dlopen will return a handle for the program itself, which can be used to access its symbols.

     If libltdl cannot find the library and the file name FILENAME does not have a directory component it will additionally search in the following search paths for the module (in the order as follows):

      1. user-defined search path: This search path can be changed by the program using the functions lt_dlsetsearchpath, lt_dladdsearchdir and lt_dlinsertsearchdir.

      2. libltdl's search path: This search path is the value of the environment variable LTDL_LIBRARY_PATH.

      3. system library search path: The system dependent library search path (e.g. on Linux it is LD_LIBRARY_PATH).

     Each search path must be a colon-separated list of absolute directories, for example, "/usr/lib/mypkg:/lib/foo".

     If the same module is loaded several times, the same handle is returned. If lt_dlopen fails for any reason, it returns NULL.

 -- Function: lt_dlhandle lt_dlopenext (const char *FILENAME)
     The same as lt_dlopen, except that it tries to append different file name extensions to the file name. If the file with the file name FILENAME cannot be found libltdl tries to append the following extensions:

      1. the libtool archive extension .la

      2. the extension used for native dynamic libraries on the host platform, e.g., .so, .sl, etc.

     This lookup strategy was designed to allow programs that don't have knowledge about native dynamic libraries naming conventions to be able to dlopen such libraries as well as libtool modules transparently.

 -- Function: int lt_dlclose (lt_dlhandle HANDLE)
     Decrement the reference count on the module HANDLE. If it drops to zero and no other module depends on this module, then the module is unloaded. Return 0 on success.

 -- Function: lt_ptr lt_dlsym (lt_dlhandle HANDLE, const char *NAME)
     Return the address in the module HANDLE, where the symbol given by the null-terminated string NAME is loaded. If the symbol cannot be found, NULL is returned.

 -- Function: const char * lt_dlerror (void)
     Return a human readable string describing the most recent error that occurred from any of libltdl's functions. Return NULL if no errors have occurred since initialization or since it was last called.

 -- Function: int lt_dlpreload (const lt_dlsymlist *PRELOADED)
     Register the list of preloaded modules PRELOADED. If PRELOADED is NULL, then all previously registered symbol lists, except the list set by lt_dlpreload_default, are deleted. Return 0 on success.

 -- Function: int lt_dlpreload_default (const lt_dlsymlist *PRELOADED)
     Set the default list of preloaded modules to PRELOADED, which won't be deleted by lt_dlpreload.  Note that this function does not require libltdl to be initialized using lt_dlinit and can be used in the program to register the default preloaded modules. Instead of calling this function directly, most programs will use the macro LTDL_SET_PRELOADED_SYMBOLS.

     Return 0 on success.

 -- Macro: LTDL_SET_PRELOADED_SYMBOLS
     Set the default list of preloaded symbols. Should be used in your program to initialize libltdl's list of preloaded modules.

          #include <ltdl.h>

          int main() {
            /* ... */
            LTDL_SET_PRELOADED_SYMBOLS();
            /* ... */
          }

 -- Function: int lt_dladdsearchdir (const char *SEARCH_DIR)
     Append the search directory SEARCH_DIR to the current user-defined library search path. Return 0 on success.

 -- Function: int lt_dlinsertsearchdir (const char *BEFORE, const char *SEARCH_DIR)
     Insert the search directory SEARCH_DIR into the user-defined library search path, immediately before the element starting at address BEFORE.  If BEFORE is NULL, then SEARCH_DIR is appending as if lt_dladdsearchdir had been called.  Return 0 on success.

 -- Function: int lt_dlsetsearchpath (const char *SEARCH_PATH)
     Replace the current user-defined library search path with SEARCH_PATH, which must be a colon-separated list of absolute directories.  Return 0 on success.

 -- Function: const char *lt_dlgetsearchpath (void)
     Return the current user-defined library search path.

 -- Function: int lt_dlforeachfile (const char *SEARCH_PATH, int (*FUNC) (const char *FILENAME, lt_ptr DATA), lt_ptr DATA)
     In some applications you may not want to load individual modules with known names, but rather find all of the modules in a set of directories and load them all during initialisation.  With this function you can have libltdl scan the colon delimited directory list in SEARCH_PATH for candidates, and pass them, along with DATA to your own callback function, FUNC.  If SEARCH_PATH is NULL, then search all of the standard locations that lt_dlopen would examine.  This function will continue to make calls to FUNC for each file that it discovers in SEARCH_PATH until one of these calls returns non-zero, or until the files are exhausted.  lt_dlforeachfile returns the value returned by the last call made to FUNC.

     For example you could define FUNC to build an ordered argv-like vector of files using DATA to hold the address of the start of the vector.

 -- Function: int lt_dlmakeresident (lt_dlhandle HANDLE)
     Mark a module so that it cannot be lt_dlclosed.  This can be useful if a module implements some core functionality in your project, which would cause your code to crash if removed.  Return 0 on success.

     If you use lt_dlopen (NULL) to get a HANDLE for the running binary, that handle will always be marked as resident, and consequently cannot be successfully lt_dlclosed.

 -- Function: int lt_dlisresident (lt_dlhandle HANDLE)
     Check whether a particular module has been marked as resident, returning 1 if it has or 0 otherwise.  If there is an error while executing this function, return -1 and set an error message for retrieval with lt_dlerror.

 -- Variable: lt_ptr (*) (size_t SIZE) lt_dlmalloc
 -- Variable: lt_ptr (*) (lt_ptr PTR, size_t SIZE) lt_dlrealloc
 -- Variable: void (*) (lt_ptr PTR) lt_dlfree
     These variables are set to malloc, realloc and free by default, but you can set them to any other functions that provide equivalent functionality.  If you change any of these function pointers, you will almost certainly need to change all three to point into the same malloc library. Strange things will happen if you allocate memory from one library, and then pass it to an implementation of free that doesn't know what book keeping the allocator used.

     You must not modify any of their values after calling any libltdl function other than lt_dlpreopen_default or the macro LTDL_SET_PRELOADED_SYMBOLS.

Creating modules that can be dlopened
=====================================

Libtool modules are like normal libtool libraries with a few exceptions:

You have to link the module with libtool's -module switch, and you should link any program that is intended to dlopen the module with -dlopen modulename.la so that libtool can dlpreopen the module on platforms which don't support dlopening.  If the module depends on any other libraries, make sure you specify them either when you link the module or when you link programs that dlopen it. If you want to disable see Versioning for a specific module you should link it with the -avoid-version switch. Note that libtool modules don't need to have a "lib" prefix. However, automake 1.4 or higher is required to build such modules.

Usually a set of modules provide the same interface, i.e, exports the same symbols, so that a program can dlopen them without having to know more about their internals. In order to avoid symbol conflicts all exported symbols must be prefixed with "modulename_LTX_" (modulename is the name of the module). Internal symbols must be named in such a way that they won't conflict with other modules, for example, by prefixing them with "_modulename_". Although some platforms support having the same symbols defined more than once it is generally not portable and it makes it impossible to dlpreopen such modules.  libltdl will automatically cut the prefix off to get the real name of the symbol.  Additionally, it supports modules which don't use a prefix so that you can also dlopen non-libtool modules.

foo1.c gives an example of a portable libtool module. Exported symbols are prefixed with "foo1_LTX_", internal symbols with "_foo1_". Aliases are defined at the beginning so that the code is more readable.

     /* aliases for the exported symbols */
     #define foo	foo1_LTX_foo
     #define bar	foo1_LTX_bar

     /* a global variable definition */
     int bar = 1;

     /* a private function */
     int _foo1_helper() {
       return bar;
     }

     /* an exported function */
     int foo() {
       return _foo1_helper();
     }

The Makefile.am contains the necessary rules to build the module foo1.la:

     ...
     lib_LTLIBRARIES = foo1.la

     foo1_la_SOURCES = foo1.c
     foo1_la_LDFLAGS = -module
     ...

Using libltdl in a multi threaded environment
=============================================

Using the lt_dlmutex_register() function, and by providing some appropriate callback function definitions, libltdl can be used in a multi-threaded environment.

 -- Type: void lt_dlmutex_lock (void)
     This is the type of a function pointer holding the address of a function which will be called at the start of parts of the libltdl implementation code which require a mutex lock.

     Because libltdl is inherently recursive, it is important that the locking mechanism employed by these callback functions are reentrant, or else strange problems will occur.

 -- Type: void lt_dlmutex_unlock (void)
     The type of a matching unlock function.

 -- Type: void lt_dlmutex_seterror (const char *ERROR);
     Many of the functions in the libltdl API have a special return value to indicate to the client that an error has occurred.  Normally (in single threaded applications) a string describing that error can be retrieved from internal storage with lt_dlerror().

     A function of this type must be registered with the library in order for it to work in a multi-threaded context.  The function should store any error message passed in thread local storage.

 -- Type: const char * lt_dlmutex_geterror (void)
     The type of a matching callback function to retrieve the last stored error message from thread local storage.

     When registered correctly this function will be used by lt_dlerror()) from all threads to retrieve error messages for the client.

 -- Function: int lt_dlmutex_register (lt_dlmutex_lock *LOCK, lt_dlmutex_unlock *UNLOCK, lt_dlmutex_set_error *SETERROR, lt_dlmutex_geterror *GETERROR)
     Use this function to register one of each of function types described above in preparation for multi-threaded use of libltdl.  All arguments must be valid non-NULL function addresses, or else all NULL to return to single threaded operation.

Data associated with loaded modules
===================================

Some of the internal information about each loaded module that is maintained by libltdl is available to the user, in the form of this structure:

 -- Type: struct lt_dlinfo { char *FILENAME; char *NAME; int REF_COUNT; }
     lt_dlinfo is used to store information about a module. The FILENAME attribute is a null-terminated character string of the real module file name.  If the module is a libtool module then NAME is its module name (e.g. "libfoo" for "dir/libfoo.la"), otherwise it is set to NULL.  The REF_COUNT attribute is a reference counter that describes how often the same module is currently loaded.

The following function will return a pointer to libltdl's internal copy of this structure for the given HANDLE:

 -- Function: const lt_dlinfo * lt_dlgetinfo (lt_dlhandle HANDLE)
     Return a pointer to a struct that contains some information about the module HANDLE.  The contents of the struct must not be modified. Return NULL on failure.

Furthermore, in order to save you from having to keep a list of the handles of all the modules you have loaded, these functions allow you to iterate over libltdl's list of loaded modules:

 -- Function: int lt_dlforeach (int (*FUNC) (lt_dlhandle HANDLE, lt_ptr DATA), lt_ptr DATA)
     For each loaded module call the function FUNC.  The argument HANDLE is the handle of one of the loaded modules, DATA is the DATA argument passed to lt_dlforeach. As soon as FUNC returns a non-zero value for one of the handles, lt_dlforeach will stop calling FUNC and immediately return 1. Otherwise 0 is returned.

 -- Function: lt_dlhandle lt_dlhandle_next (lt_dlhandle place)
     Iterate over the loaded module handles, returning the first handle in the list if PLACE is NULL, and the next one on subsequent calls. If PLACE is the last element in the list of loaded modules, this function returns NULL.

Of course, you would still need to maintain your own list of loaded module handles to parallel the list maintained by libltdl if there are any other data that you need to associate with each handle for the purposes of your application.  However, if you use the following API calls to associate your application data with individual module handles as they are loaded there is actually no need to do that.  You must first obtain a unique caller id from libltdl which you subsequently use to retrieve the data you stored earlier.  This allows for different libraries that each wish to store their own data against loaded modules to do so without interfering with one another's data.

 -- Type: lt_dlcaller_id
     The opaque type used to hold individual data set keys.

 -- Function: lt_dlcaller_id lt_dlcaller_register (void)
     Use this to obtain a unique key to store and retrieve individual sets of per module data.

 -- Function: lt_ptr lt_dlcaller_set_data (lt_dlcaller_id KEY, lt_dlhandle HANDLE, lt_ptr DATA)
     Set DATA as the set of data uniquely associated with KEY and HANDLE for later retrieval.  This function returns the DATA previously associated with KEY and HANDLE if any.  A result of 0, may indicate that a diagnostic for the last error (if any) is available from lt_dlerror().

     For example, to correctly remove some associated data:

              lt_ptr stale = lt_dlcaller_set_data (key, handle, 0);
              if (stale == NULL)
                {
                  char *error_msg = lt_dlerror ();

                  if (error_msg != NULL)
                    {
                      my_error_handler (error_msg);
                      return STATUS_FAILED;
                    }
                }
              else
                {
                  free (stale);
                }

 -- Function: lt_ptr lt_dlcaller_get_data (lt_dlcaller_id KEY, lt_dlhandle HANDLE)
     Return the address of the data associated with KEY and HANDLE, or else NULL if there is none.

The preceding functions can be combined with lt_dlforeach to implement search and apply operations without the need for your application to track the modules that have been loaded and unloaded:

     int
     my_dlcaller_callback (lt_dlhandle handle, lt_ptr key_ptr)
     {
       struct my_module_data *my_data;

       my_data = lt_dlcaller_get_data (handle, (lt_dlcaller_id) *key_ptr);

       return process (my_data);
     }

     int
     my_dlcaller_foreach (lt_dlcaller_id key)
     {
       lt_dlforeach (my_dlcaller_callback, (lt_ptr) &key);
     }

How to create and register new module loaders
=============================================

Sometimes libltdl's many ways of gaining access to modules are not sufficient for the purposes of a project.  You can write your own loader, and register it with libltdl so that lt_dlopen will be able to use it.

Writing a loader involves writing at least three functions which can be called  by lt_dlopen, lt_dlsym and lt_dlclose. Optionally, you can provide a finalisation function to perform any cleanup operations when lt_dlexit executes, and a symbol prefix string which will be prepended to any symbols passed to lt_dlsym. These functions must match the function pointer types below, after which they can be allocated to an instance of lt_user_dlloader and registered.

Registering the loader requires that you choose a name for it, so that it can be recognised by lt_dlloader_find and removed with lt_dlloader_remove.  The name you choose must be unique, and not already in use by libltdl's builtin loaders:

"dlopen"
     The system dynamic library loader, if one exists.

"dld"
     The GNU dld loader, if libdld was installed when libltdl was built.

"dlpreload"
     The loader for lt_dlopening of preloaded static modules.

The prefix "dl" is reserved for loaders supplied with future versions of libltdl, so you should not use that for your own loader names.

The following types are defined in ltdl.h:

 -- Type: lt_module
     lt_module is a dlloader dependent module. The dynamic module loader extensions communicate using these low level types.

 -- Type: lt_dlloader
     lt_dlloader is a handle for module loader types.

 -- Type: lt_user_data
     lt_user_data is used for specifying loader instance data.

 -- Type: struct lt_user_dlloader {const char *SYM_PREFIX; lt_module_open *MODULE_OPEN; lt_module_close *MODULE_CLOSE; lt_find_sym *FIND_SYM; lt_dlloader_exit *DLLOADER_EXIT; }
     If you want to define a new way to open dynamic modules, and have the lt_dlopen API use it, you need to instantiate one of these structures and pass it to lt_dlloader_add.  You can pass whatever you like in the DLLOADER_DATA field, and it will be passed back as the value of the first parameter to each of the functions specified in the function pointer fields.

 -- Type: lt_module lt_module_open (const char *FILENAME)
     The type of the loader function for an lt_dlloader module loader.  The value set in the dlloader_data field of the struct lt_user_dlloader structure will be passed into this function in the LOADER_DATA parameter.  Implementation of such a function should attempt to load the named module, and return an lt_module suitable for passing in to the associated lt_module_close and lt_sym_find function pointers.  If the function fails it should return NULL, and set the error message with lt_dlseterror.

 -- Type: int lt_module_close (lt_user_data LOADER_DATA, lt_module MODULE)
     The type of the unloader function for a user defined module loader. Implementation of such a function should attempt to release any resources tied up by the MODULE module, and then unload it from memory.  If the function fails for some reason, set the error message with lt_dlseterror and return non-zero.

 -- Type: lt_ptr lt_find_sym (lt_module MODULE, const char *SYMBOL)
     The type of the symbol lookup function for a user defined module loader. Implementation of such a function should return the address of the named SYMBOL in the module MODULE, or else set the error message with lt_dlseterror and return NULL if lookup fails.

 -- Type: int lt_dlloader_exit (lt_user_data LOADER_DATA)
     The type of the finalisation function for a user defined module loader. Implementation of such a function should free any resources associated with the loader, including any user specified data in the dlloader_data field of the lt_user_dlloader.  If non-NULL, the function will be called by lt_dlexit, and lt_dlloader_remove.

For example:

     int
     register_myloader (void)
     {
       lt_user_dlloader dlloader;

       /* User modules are responsible for their own initialisation. */
       if (myloader_init () != 0)
         return MYLOADER_INIT_ERROR;

       dlloader.sym_prefix    = NULL;
       dlloader.module_open   = myloader_open;
       dlloader.module_close  = myloader_close;
       dlloader.find_sym      = myloader_find_sym.
       dlloader.dlloader_exit = myloader_exit;
       dlloader.dlloader_data = (lt_user_data)myloader_function;

       /* Add my loader as the default module loader. */
       if (lt_dlloader_add (lt_dlloader_next (NULL), &dlloader, "myloader") \
                     != 0)
         return ERROR;

       return OK;
     }

Note that if there is any initialisation required for the loader, it must be performed manually before the loader is registered -- libltdl doesn't handle user loader initialisation.

Finalisation is handled by libltdl however, and it is important to ensure the dlloader_exit callback releases any resources claimed during the initialisation phase.

libltdl provides the following functions for writing your own module loaders:

 -- Function: int lt_dlloader_add (lt_dlloader *PLACE, lt_user_dlloader *DLLOADER, const char *LOADER_NAME)
     Add a new module loader to the list of all loaders, either as the last loader (if PLACE is NULL), else immediately before the loader passed as PLACE.  LOADER_NAME will be returned by lt_dlloader_name if it is subsequently passed a newly registered loader.  These LOADER_NAMEs must be unique, or lt_dlloader_remove and lt_dlloader_find cannot work. Returns 0 for success.

          {
            /* Make myloader be the last one. */
            if (lt_dlloader_add (NULL, myloader) != 0)
              perror (lt_dlerror ());
          }

 -- Function: int lt_dlloader_remove (const char *LOADER_NAME)
     Remove the loader identified by the unique name, LOADER_NAME. Before this can succeed, all modules opened by the named loader must have been closed.  Returns 0 for success, otherwise an error message can be obtained from lt_dlerror.

          {
            /* Remove myloader. */
            if (lt_dlloader_remove ("myloader") != 0)
              perror (lt_dlerror ());
          }

 -- Function: lt_dlloader *lt_dlloader_next (lt_dlloader *PLACE)
     Iterate over the module loaders, returning the first loader if PLACE is NULL, and the next one on subsequent calls. The handle is for use with lt_dlloader_add.

          {
            /* Make myloader be the first one. */
            if (lt_dlloader_add (lt_dlloader_next (NULL), myloader) != 0)
              return ERROR;
          }

 -- Function: lt_dlloader *lt_dlloader_find (const char *LOADER_NAME)
     Return the first loader with a matching LOADER_NAME identifier, or else NULL, if the identifier is not found.

     The identifiers which may be used by libltdl itself, if the host architecture supports them are dlopen (This is used for the host dependent module loading API -- shl_load and LoadLibrary for example), dld and dlpreload.

          {
            /* Add a user loader as the next module loader to be tried if
               the standard dlopen loader were to fail when lt_dlopening. */
            if (lt_dlloader_add (lt_dlloader_find ("dlopen"), myloader) != 0)
              return ERROR;
          }

 -- Function: const char *lt_dlloader_name (lt_dlloader *PLACE)
     Return the identifying name of PLACE, as obtained from lt_dlloader_next or lt_dlloader_find.  If this function fails, it will return NULL and set an error for retrieval with lt_dlerror.

 -- Function: lt_user_data *lt_dlloader_data (lt_dlloader *PLACE)
     Return the address of the dlloader_data of PLACE, as obtained from lt_dlloader_next or lt_dlloader_find.  If this function fails, it will return NULL and set an error for retrieval with lt_dlerror.

Error handling within user module loaders
-----------------------------------------

 -- Function: int lt_dladderror (const char *DIAGNOSTIC)
     This function allows you to integrate your own error messages into lt_dlerror.  Pass in a suitable diagnostic message for return by lt_dlerror, and an error identifier for use with lt_dlseterror is returned.

     If the allocation of an identifier fails, this function returns -1.

          int myerror = lt_dladderror ("Doh!");
          if (myerror < 0)
            perror (lt_dlerror ());

 -- Function: int lt_dlseterror (int ERRORCODE)
     When writing your own module loaders, you should use this function to raise errors so that they are propagated through the lt_dlerror interface. All of the standard errors used by libltdl are declared in ltdl.h, or you can add more of your own with lt_dladderror.  This function returns 0 on success.

          if (lt_dlseterror (LTDL_ERROR_NO_MEMORY) != 0)
            perror (lt_dlerror ());

How to distribute libltdl with your package
===========================================

Even though libltdl is installed together with libtool, you may wish to include libltdl in the distribution of your package, for the convenience of users of your package that don't have libtool or libltdl installed. In this case, you must decide whether to manually add the ltdl objects to your package, or else which flavor of libltdl you want to use: a convenience library or an installable libtool library.

The most simplistic way to add libltdl to your package is to copy the source files, ltdl.c and ltdl.h, to a source directory within your package and to build and link them along with the rest of your sources.  To help you do this, the m4 macros for autoconf are available in ltdl.m4.  You must ensure that they are available in aclocal.m4 before you run Autoconf -- by appending the contents of ltdl.m4 to acinclude.m4, if you are using automake, or to aclocal.m4 if you are not.  Having made the macros available, you must add a call to the AC_LIB_LTDL macro to your package's configure.in to perform the configure time checks required to build ltdl.o correctly.  This method has problems if you then try to link the package binaries with an installed libltdl, or a library which depends on libltdl: you may have problems with duplicate symbol definitions.

One advantage of the convenience library is that it is not installed, so the fact that you use libltdl will not be apparent to the user, and it will not overwrite a pre-installed version of libltdl a user might have. On the other hand, if you want to upgrade libltdl for any reason (e.g. a bugfix) you'll have to recompile your package instead of just replacing an installed version of libltdl. However, if your programs or libraries are linked with other libraries that use such a pre-installed version of libltdl, you may get linker errors or run-time crashes.  Another problem is that you cannot link the convenience library into more than one libtool library, then link a single program with these libraries, because you may get duplicate symbols. In general you can safely use the convenience library in programs which don't depend on other libraries that might use libltdl too. In order to enable this flavor of libltdl, you should add the line AC_LIBLTDL_CONVENIENCE to your configure.in, before AC_PROG_LIBTOOL.

In order to select the installable version of libltdl, you should add a call of the macro AC_LIBLTDL_INSTALLABLE to your configure.in before AC_PROG_LIBTOOL.  This macro will check whether libltdl is already installed and, if not, request the libltdl embedded in your package to be built and installed.  Note, however, that no version checking is performed.  The user may override the test and determine that the libltdl embedded must be installed, regardless of the existence of another version, using the configure switch --enable-ltdl-install.

In order to embed libltdl into your package, just add --ltdl to the libtoolize command line. It will copy the libltdl sources to a subdirectory libltdl in your package. Both macros accept an optional argument to specify the location of the libltdl directory. By the default both macros assume that it is ${top_srcdir}/libltdl.

Whatever macro you use, it is up to you to ensure that your configure.in will configure libltdl, using AC_CONFIG_SUBDIRS, and that your Makefiles will start sub-makes within libltdl's directory, using automake's SUBDIRS, for example.  Both macros define the shell variables LIBLTDL, to the link flag that you should use to link with libltdl, and LTDLINCL, to the preprocessor flag that you should use to compile with programs that include ltdl.h.  It is up to you to use AC_SUBST to ensure that this variable will be available in Makefiles, or add them to variables that are AC_SUBSTed by default, such as LIBS and CPPFLAGS.  Also note that you should not include libltdl/Makefile in the list of files to be configured from your toplevel configure.in; this is done by libltdl/configure.ac.

If you're using the convenience libltdl, LIBLTDL will be the pathname for the convenience version of libltdl and LTDLINCL will be -I followed by the directory that contains libltdl, both starting with ${top_builddir}/ or ${top_srcdir}/, respectively.

If you request an installed version of libltdl and one is found (Even if libltdl is installed, AC_LIBLTDL_INSTALLABLE may fail to detect it, if libltdl depends on symbols provided by libraries other than the C library.  In this case, it will needlessly build and install libltdl.), LIBLTDL will be set to -lltdl and LTDLINCL will be empty (which is just a blind assumption that ltdl.h is somewhere in the include path if libltdl is in the library path).  If an installable version of libltdl must be built, its pathname, starting with ${top_builddir}/, will be stored in LIBLTDL, and LTDLINCL will be set just like in the case of convenience library.

So, when you want to link a program with libltdl, be it a convenience, installed or installable library, just compile with $(LTDLINCL) and link it with $(LIBLTDL), using libtool.

You should probably also add AC_LIBTOOL_DLOPEN to your configure.in before AC_PROG_LIBTOOL, otherwise libtool will assume no dlopening mechanism is supported, and revert to dlpreopening, which is probably not what you want.

Avoid using the -static, -static-libtool-libs or -all-static switches when linking programs with libltdl.  This will not work on all platforms, because the dlopening functions may not be available for static linking.

The following example shows you how to embed the convenience libltdl in your package.  In order to use the installable variant just replace AC_LIBLTDL_CONVENIENCE with AC_LIBLTDL_INSTALLABLE.  We assume that libltdl was embedded using libtoolize --ltdl.

configure.in:

     ...
     dnl Enable building of the convenience library
     dnl and set LIBLTDL accordingly
     AC_LIBLTDL_CONVENIENCE
     dnl Check for dlopen support
     AC_LIBTOOL_DLOPEN
     dnl Configure libtool
     AC_PROG_LIBTOOL
     dnl Configure libltdl
     AC_CONFIG_SUBDIRS(libltdl)
     ...

Makefile.am:

     ...
     SUBDIRS = libltdl

     INCLUDES = $(LTDLINCL)

     myprog_LDFLAGS = -export-dynamic
     # The quotes around -dlopen below fool automake <= 1.4 into accepting it
     myprog_LDADD = $(LIBLTDL) "-dlopen" self "-dlopen" foo1.la
     myprog_DEPENDENCIES = $(LIBLTDL) foo1.la
     ...

Using libtool with other languages
**********************************

Libtool was first implemented in order to add support for writing shared libraries in the C language.  However, over time, libtool is being integrated with other languages, so that programmers are free to reap the benefits of shared libraries in their favorite programming language.

This chapter describes how libtool interacts with other languages, and what special considerations you need to make if you do not use C.

Writing libraries for C++
=========================

Creating libraries of C++ code should be a fairly straightforward process, because its object files differ from C ones in only three ways:

 1. Because of name mangling, C++ libraries are only usable by the C++ compiler that created them.  This decision was made by the designers of C++ in order to protect users from conflicting implementations of features such as constructors, exception handling, and RTTI.

 2. On some systems, the C++ compiler must take special actions for the dynamic linker to run dynamic (i.e., run-time) initializers.  This means that we should not call ld directly to link such libraries, and we should use the C++ compiler instead.

 3. C++ compilers will link some Standard C++ library in by default, but libtool does not know which are these libraries, so it cannot even run the inter-library dependence analyzer to check how to link it in. Therefore, running ld to link a C++ program or library is deemed to fail.

Because of these three issues, Libtool has been designed to always use the C++ compiler to compile and link C++ programs and libraries.  In some instances the main() function of a program must also be compiled with the C++ compiler for static C++ objects to be properly initialized.

Tags
====

Libtool supports multiple languages through the use of tags.  Technically a tag corresponds to a set of configuration variables associated with a language.  These variables tell libtool how it should create objects and libraries for each language.

Tags are defined at configure-time for each language activated in the package.  Here is the correspondence between language names and tags names.

Language name      Tag name
C                  CC
C++                CXX
Java               GCJ
Fortran 77         F77
Windows Resource   RC

libtool tries to automatically infer which tag to use from the compiler command being used to compile or link.  If it can't infer a tag, then it defaults to the configuration for the C language.

The tag can also be specified using libtool's --tag=TAG option (see Invoking libtool).  It is a good idea to do so in Makefile rules, because that will allow users to substitute the compiler without relying on libtool inference heuristics.  When no tag is specified, libtool will default to CC; this tag always exists.

Troubleshooting
***************

Libtool is under constant development, changing to remain up-to-date with modern operating systems.  If libtool doesn't work the way you think it should on your platform, you should read this chapter to help determine what the problem is, and how to resolve it.

The libtool test suite
======================

Libtool comes with its own set of programs that test its capabilities, and report obvious bugs in the libtool program.  These tests, too, are constantly evolving, based on past problems with libtool, and known deficiencies in other operating systems.

As described in the INSTALL file, you may run make check after you have built libtool (possibly before you install it) in order to make sure that it meets basic functional requirements.

Description of test suite
-------------------------

Here is a list of the current programs in the test suite, and what they test for:

cdemo-conf.test
cdemo-exec.test
cdemo-make.test
cdemo-static.test
cdemo-shared.test
     These programs check to see that the cdemo subdirectory of the libtool distribution can be configured and built correctly.

     The cdemo subdirectory contains a demonstration of libtool convenience libraries, a mechanism that allows build-time static libraries to be created, in a way that their components can be later linked into programs or other libraries, even shared ones.

     The tests cdemo-make.test and cdemo-exec.test are executed three times, under three different libtool configurations: cdemo-conf.test configures cdemo/libtool to build both static and shared libraries (the default for platforms that support both), cdemo-static.test builds only static libraries (--disable-shared), and cdemo-shared.test builds only shared libraries (--disable-static).

demo-conf.test
demo-exec.test
demo-inst.test
demo-make.test
demo-unst.test
demo-static.test
demo-shared.test
demo-nofast.test
demo-pic.test
demo-nopic.test
     These programs check to see that the demo subdirectory of the libtool distribution can be configured, built, installed, and uninstalled correctly.

     The demo subdirectory contains a demonstration of a trivial package that uses libtool.  The tests demo-make.test, demo-exec.test, demo-inst.test and demo-unst.test are executed four times, under four different libtool configurations: demo-conf.test configures demo/libtool to build both static and shared libraries, demo-static.test builds only static libraries (--disable-shared), and demo-shared.test builds only shared libraries (--disable-static). demo-nofast.test configures demo/libtool to disable the fast-install mode (--enable-fast-install=no). demo-pic.test configures demo/libtool to prefer building PIC code (--with-pic), demo-nopic.test to prefer non-PIC code (--without-pic).

deplibs.test
     Many systems cannot link static libraries into shared libraries. libtool uses a deplibs_check_method to prevent such cases. This tests checks whether libtool's deplibs_check_method works properly.

hardcode.test
     On all systems with shared libraries, the location of the library can be encoded in executables that are linked against it see Linking executables.  This test checks the conditions under which your system linker hardcodes the library location, and guarantees that they correspond to libtool's own notion of how your linker behaves.

build-relink.test
     Checks whether variable SHLIBPATH_OVERRIDES_RUNPATH is properly set.  If the test fails and VERBOSE is set, it will indicate what the variable should have been set to.

noinst-link.test
     Checks whether libtool will not try to link with a previously installed version of a library when it should be linking with a just-built one.

depdemo-conf.test
depdemo-exec.test
depdemo-inst.test
depdemo-make.test
depdemo-unst.test
depdemo-static.test
depdemo-shared.test
depdemo-nofast.test
     These programs check to see that the depdemo subdirectory of the libtool distribution can be configured, built, installed, and uninstalled correctly.

     The depdemo subdirectory contains a demonstration of inter-library dependencies with libtool.  The test programs link some interdependent libraries.

     The tests depdemo-make.test, depdemo-exec.test, depdemo-inst.test and depdemo-unst.test are executed four times, under four different libtool configurations: depdemo-conf.test configures depdemo/libtool to build both static and shared libraries, depdemo-static.test builds only static libraries (--disable-shared), and depdemo-shared.test builds only shared libraries (--disable-static). depdemo-nofast.test configures depdemo/libtool to disable the fast-install mode (--enable-fast-install=no.

mdemo-conf.test
mdemo-exec.test
mdemo-inst.test
mdemo-make.test
mdemo-unst.test
mdemo-static.test
mdemo-shared.test
     These programs check to see that the mdemo subdirectory of the libtool distribution can be configured, built, installed, and uninstalled correctly.

     The mdemo subdirectory contains a demonstration of a package that uses libtool and the system independent dlopen wrapper libltdl to load modules.  The library libltdl provides a dlopen wrapper for various platforms (Linux, Solaris, HP/UX etc.) including support for dlpreopened modules (see Dlpreopening).

     The tests mdemo-make.test, mdemo-exec.test, mdemo-inst.test and mdemo-unst.test are executed three times, under three different libtool configurations: mdemo-conf.test configures mdemo/libtool to build both static and shared libraries, mdemo-static.test builds only static libraries (--disable-shared), and mdemo-shared.test builds only shared libraries (--disable-static).

dryrun.test
     This test checks whether libtool's --dry-run mode works properly.

assign.test
     Checks whether we don't put break or continue on the same line as an assignment in the libtool script.

link.test
     This test guarantees that linking directly against a non-libtool static library works properly.

link-2.test
     This test makes sure that files ending in .lo are never linked directly into a program file.

nomode.test
     Check whether we can actually get help for libtool.

quote.test
     This program checks libtool's metacharacter quoting.

sh.test
     Checks whether a `test' command was forgotten in libtool.

suffix.test
     When other programming languages are used with libtool (see Other languages), the source files may end in suffixes other than .c. This test validates that libtool can handle suffixes for all the file types that it supports, and that it fails when the suffix is invalid.

When tests fail
---------------

Each of the above tests are designed to produce no output when they are run via make check.  The exit status of each program tells the Makefile whether or not the test succeeded.

If a test fails, it means that there is either a programming error in libtool, or in the test program itself.

To investigate a particular test, you may run it directly, as you would a normal program.  When the test is invoked in this way, it produces output which may be useful in determining what the problem is.

Another way to have the test programs produce output is to set the VERBOSE environment variable to yes before running them. For example, env VERBOSE=yes make check runs all the tests, and has each of them display debugging information.

Reporting bugs
==============

If you think you have discovered a bug in libtool, you should think twice: the libtool maintainer is notorious for passing the buck (or maybe that should be ``passing the bug'').  Libtool was invented to fix known deficiencies in shared library implementations, so, in a way, most of the bugs in libtool are actually bugs in other operating systems. However, the libtool maintainer would definitely be happy to add support for somebody else's buggy operating system.  [I wish there was a good way to do winking smiley-faces in Texinfo.]

Genuine bugs in libtool include problems with shell script portability, documentation errors, and failures in the test suite (see Libtool test suite).

First, check the documentation and help screens to make sure that the behaviour you think is a problem is not already mentioned as a feature.

Then, you should read the Emacs guide to reporting bugs (see Reporting Bugs (The Emacs Manual)).  Some of the details listed there are specific to Emacs, but the principle behind them is a general one.

Finally, send a bug report to the libtool bug reporting address bug-libtool@gnu.org with any appropriate facts, such as test suite output (see When tests fail), all the details needed to reproduce the bug, and a brief description of why you think the behaviour is a bug.  Be sure to include the word ``libtool'' in the subject line, as well as the version number you are using (which can be found by typing libtool --version).

Maintenance notes for libtool
*****************************

This chapter contains information that the libtool maintainer finds important.  It will be of no use to you unless you are considering porting libtool to new systems, or writing your own libtool.

Porting libtool to new systems
==============================

Before you embark on porting libtool to an unsupported system, it is worthwhile to send e-mail to the libtool mailing list libtool@gnu.org, to make sure that you are not duplicating existing work.

If you find that any porting documentation is missing, please complain! Complaints with patches and improvements to the documentation, or to libtool itself, are more than welcome.

Information sources
-------------------

Once it is clear that a new port is necessary, you'll generally need the following information:

canonical system name
     You need the output of config.guess for this system, so that you can make changes to the libtool configuration process without affecting other systems.

man pages for ld and cc
     These generally describe what flags are used to generate PIC, to create shared libraries, and to link against only static libraries.  You may need to follow some cross references to find the information that is required.

man pages for ld.so, rtld, or equivalent
     These are a valuable resource for understanding how shared libraries are loaded on the system.

man page for ldconfig, or equivalent
     This page usually describes how to install shared libraries.

output from ls -l /lib /usr/lib
     This shows the naming convention for shared libraries on the system, including which names should be symbolic links.

any additional documentation
     Some systems have special documentation on how to build and install shared libraries.

If you know how to program the Bourne shell, then you can complete the port yourself; otherwise, you'll have to find somebody with the relevant skills who will do the work.  People on the libtool mailing list are usually willing to volunteer to help you with new ports, so you can send the information to them.

To do the port yourself, you'll definitely need to modify the libtool.m4 macros in order to make platform-specific changes to the configuration process.  You should search that file for the PORTME keyword, which will give you some hints on what you'll need to change.  In general, all that is involved is modifying the appropriate configuration variables (see libtool script contents).

Your best bet is to find an already-supported system that is similar to yours, and make your changes based on that.  In some cases, however, your system will differ significantly from every other supported system, and it may be necessary to add new configuration variables, and modify the ltmain.in script accordingly.  Be sure to write to the mailing list before you make changes to ltmain.in, since they may have advice on the most effective way of accomplishing what you want.

Porting inter-library dependencies support
------------------------------------------

Since version 1.2c, libtool has re-introduced the ability to do inter-library dependency on some platforms, thanks to a patch by Toshio Kuratomi badger@prtr-13.ucsc.edu.  Here's a shortened version of the message that contained his patch:

The basic architecture is this: in libtool.m4, the person who writes libtool makes sure $deplibs is included in $archive_cmds somewhere and also sets the variable $deplibs_check_method, and maybe $file_magic_cmd when deplibs_check_method is file_magic.

deplibs_check_method can be one of five things:

file_magic [REGEX]
     looks in the library link path for libraries that have the right libname.  Then it runs $file_magic_cmd on the library and checks for a match against the extended regular expression REGEX.  When FILE_MAGIC_TEST_FILE is set by libtool.m4, it is used as an argument to $file_magic_cmd in order to verify whether the regular expression matches its output, and warn the user otherwise.

test_compile
     just checks whether it is possible to link a program out of a list of libraries, and checks which of those are listed in the output of ldd.  It is currently unused, and will probably be dropped in the future.

pass_all
     will pass everything without any checking.  This may work on platforms in which code is position-independent by default and inter-library dependencies are properly supported by the dynamic linker, for example, on DEC OSF/1 3 and 4.

none
     It causes deplibs to be reassigned deplibs="".  That way archive_cmds can contain deplibs on all platforms, but not have deplibs used unless needed.

unknown
     is the default for all systems unless overridden in libtool.m4. It is the same as none, but it documents that we really don't know what the correct value should be, and we welcome patches that improve it.

Then in ltmain.in we have the real workhorse: a little initialization and postprocessing (to setup/release variables for use with eval echo libname_spec etc.) and a case statement that decides which method is being used.  This is the real code... I wish I could condense it a little more, but I don't think I can without function calls.  I've mostly optimized it (moved things out of loops, etc.) but there is probably some fat left.  I thought I should stop while I was ahead, work on whatever bugs you discover, etc. before thinking about more than obvious optimizations.

Tested platforms
================

This table describes when libtool was last known to be tested on platforms where it claims to support shared libraries:

          [file PLATFORMS not included]

Note: The vendor-distributed HP-UX sed(1) programs are horribly broken, and cannot handle libtool's requirements, so users may report unusual problems.  There is no workaround except to install a working sed (such as GNU sed) on these systems.

Note: The vendor-distributed NCR MP-RAS cc programs emits copyright on standard error that confuse tests on size of conftest.err.  The workaround is to specify CC when run configure with CC='cc -Hnocopyr'.

Platform quirks
===============

This section is dedicated to the sanity of the libtool maintainers.  It describes the programs that libtool uses, how they vary from system to system, and how to test for them.

Because libtool is a shell script, it can be difficult to understand just by reading it from top to bottom.  This section helps show why libtool does things a certain way.  Combined with the scripts themselves, you should have a better sense of how to improve libtool, or write your own.

References
----------

The following is a list of valuable documentation references:

  * SGI's IRIX Manual Pages, which can be found at http://techpubs.sgi.com/cgi-bin/infosrch.cgi?cmd=browse&db=man.

  * Sun's free service area (http://www.sun.com/service/online/free.html) and documentation server (http://docs.sun.com/).

  * Compaq's Tru64 UNIX online documentation is at

     (http://tru64unix.compaq.com/faqs/publications/pub_page/doc_list.html) with C++ documentation at

     (http://tru64unix.compaq.com/cplus/docs/index.htm).

  * Hewlett-Packard has online documentation at (http://docs.hp.com/index.html).

  * IBM has online documentation at (http://www.rs6000.ibm.com/resource/aix_resource/Pubs/).

Compilers
---------

The only compiler characteristics that affect libtool are the flags needed (if any) to generate PIC objects.  In general, if a C compiler supports certain PIC flags, then any derivative compilers support the same flags.  Until there are some noteworthy exceptions to this rule, this section will document only C compilers.

The following C compilers have standard command line options, regardless of the platform:

gcc

     This is the GNU C compiler, which is also the system compiler for many free operating systems (FreeBSD, GNU/Hurd, GNU/Linux, Lites, NetBSD, and OpenBSD, to name a few).

     The -fpic or -fPIC flags can be used to generate position-independent code.  -fPIC is guaranteed to generate working code, but the code is slower on m68k, m88k, and Sparc chips. However, using -fpic on those chips imposes arbitrary size limits on the shared libraries.

The rest of this subsection lists compilers by the operating system that they are bundled with:

aix3*
aix4*
     Most AIX compilers have no PIC flags, since AIX (with the exception of AIX for IA-64) runs on PowerPC and RS/6000 chips.  (All code compiled for the PowerPC and RS/6000 chips (powerpc-*-*, powerpcle-*-*, and rs6000-*-*) is position-independent, regardless of the operating system or compiler suite.  So, ``regular objects'' can be used to build shared libraries on these systems and no special PIC compiler flags are required.)

hpux10*
     Use +Z to generate PIC.

osf3*
     Digital/UNIX 3.x does not have PIC flags, at least not on the PowerPC platform.

solaris2*
     Use -KPIC to generate PIC.

sunos4*
     Use -PIC to generate PIC.

Reloadable objects
------------------

On all known systems, a reloadable object can be created by running ld -r -o OUTPUT.o INPUT1.o INPUT2.o.  This reloadable object may be treated as exactly equivalent to other objects.

Multiple dependencies
---------------------

On most modern platforms the order that dependent libraries are listed has no effect on object generation.  In theory, there are platforms which require libraries which provide missing symbols to other libraries to listed after those libraries whose symbols they provide.

Particularly, if a pair of static archives each resolve some of the other's symbols, it might be necessary to list one of those archives both before and after the other one.  Libtool does not currently cope with this situation well, since duplicate libraries are removed from the link line by default.  Libtool provides the command line option --preserve-dup-deps to preserve all duplicate dependencies in cases where it is necessary.

Archivers
---------

On all known systems, building a static library can be accomplished by running ar cru libNAME.a OBJ1.o OBJ2.o ..., where the .a file is the output library, and each .o file is an object file.

On all known systems, if there is a program named ranlib, then it must be used to ``bless'' the created library before linking against it, with the ranlib libNAME.a command.  Some systems, like Irix, use the ar ts command, instead.

libtool script contents
=======================

Since version 1.4, the libtool script is generated by configure (see Configuring).  In earlier versions, configure achieved this by calling a helper script called ltconfig.  From libtool version 0.7 to 1.0, this script simply set shell variables, then sourced the libtool backend, ltmain.sh.  ltconfig from libtool version 1.1 through 1.3 inlined the contents of ltmain.sh into the generated libtool, which improved performance on many systems.  The tests that ltconfig used to perform are now kept in libtool.m4 where they can be written using Autoconf.  This has the runtime performance benefits of inlined ltmain.sh, and improves the build time a little while considerably easing the amount of raw shell code that used to need maintaining.

The convention used for naming variables which hold shell commands for delayed evaluation, is to use the suffix _cmd where a single line of valid shell script is needed, and the suffix _cmds where multiple lines of shell script may be delayed for later evaluation.  By convention, _cmds variables delimit the evaluation units with the ~ character where necessary.

Here is a listing of each of the configuration variables, and how they are used within ltmain.sh (see Configuring):

 -- Variable: AR
     The name of the system library archiver.

 -- Variable: CC
     The name of the C compiler used to configure libtool.

 -- Variable: LD
     The name of the linker that libtool should use internally for reloadable linking and possibly shared libraries.

 -- Variable: NM
     The name of a BSD-compatible nm program, which produces listings of global symbols in one the following formats:

          ADDRESS C GLOBAL-VARIABLE-NAME
          ADDRESS D GLOBAL-VARIABLE-NAME
          ADDRESS T GLOBAL-FUNCTION-NAME

 -- Variable: RANLIB
     Set to the name of the ranlib program, if any.

 -- Variable: allow_undefined_flag
     The flag that is used by archive_cmds in order to declare that there will be unresolved symbols in the resulting shared library. Empty, if no such flag is required.  Set to unsupported if there is no way to generate a shared library with references to symbols that aren't defined in that library.

 -- Variable: always_export_symbols
     Whether libtool should automatically generate a list of exported symbols using EXPORT_SYMBOLS_CMDS before linking an archive. Set to yes or no.  Default is no.

 -- Variable: archive_cmds
 -- Variable: archive_expsym_cmds
 -- Variable: old_archive_cmds
     Commands used to create shared libraries, shared libraries with -export-symbols and static libraries, respectively.

 -- Variable: old_archive_from_new_cmds
     If the shared library depends on a static library, old_archive_from_new_cmds contains the commands used to create that static library.  If this variable is not empty, old_archive_cmds is not used.

 -- Variable: old_archive_from_expsyms_cmds
     If a static library must be created from the export symbol list in order to correctly link with a shared library, old_archive_from_expsyms_cmds contains the commands needed to create that static library.  When these commands are executed, the variable SONAME contains the name of the shared library in question, and the $OBJDIR/$NEWLIB contains the path of the static library these commands should build.  After executing these commands, libtool will proceed to link against $OBJDIR/$NEWLIB instead of SONAME.

 -- Variable: build_libtool_libs
     Whether libtool should build shared libraries on this system.  Set to yes or no.

 -- Variable: build_old_libs
     Whether libtool should build static libraries on this system.  Set to yes or no.

 -- Variable: compiler_c_o
     Whether the compiler supports the -c and -o options simultaneously. Set to yes or no.

 -- Variable: compiler_o_lo
     Whether the compiler supports compiling directly to a ".lo" file, i.e whether object files do not have to have the suffix ".o". Set to yes or no.

 -- Variable: dlopen_support
     Whether dlopen is supported on the platform. Set to yes or no.

 -- Variable: dlopen_self
     Whether it is possible to dlopen the executable itself. Set to yes or no.

 -- Variable: dlopen_self_static
     Whether it is possible to dlopen the executable itself, when it is linked statically (-all-static).  Set to yes or no.

 -- Variable: echo
     An echo program which does not interpret backslashes as an escape character.

 -- Variable: exclude_expsyms
     List of symbols that should not be listed in the preloaded symbols.

 -- Variable: export_dynamic_flag_spec
     Compiler link flag that allows a dlopened shared library to reference symbols that are defined in the program.

 -- Variable: export_symbols_cmds
     Commands to extract exported symbols from LIBOBJS to the file EXPORT_SYMBOLS.

 -- Variable: extract_expsyms_cmds
     Commands to extract the exported symbols list from a shared library. These commands are executed if there is no file $OBJDIR/$SONAME-DEF, and should write the names of the exported symbols to that file, for the use of old_archive_from_expsyms_cmds.

 -- Variable: fast_install
     Determines whether libtool will privilege the installer or the developer.  The assumption is that installers will seldom run programs in the build tree, and the developer will seldom install.  This is only meaningful on platforms in which SHLIBPATH_OVERRIDES_RUNPATH is not yes, so FAST_INSTALL will be set to needless in this case.  If FAST_INSTALL set to yes, libtool will create programs that search for installed libraries, and, if a program is run in the build tree, a new copy will be linked on-demand to use the yet-to-be-installed libraries.  If set to no, libtool will create programs that use the yet-to-be-installed libraries, and will link a new copy of the program at install time.  The default value is yes or needless, depending on platform and configuration flags, and it can be turned from yes to no with the configure flag --disable-fast-install.

 -- Variable: finish_cmds
     Commands to tell the dynamic linker how to find shared libraries in a specific directory.

 -- Variable: finish_eval
     Same as FINISH_CMDS, except the commands are not displayed.

 -- Variable: fix_srcfile_path
     Expression to fix the shell variable $srcfile for the compiler.

 -- Variable: global_symbol_pipe
     A pipeline that takes the output of NM, and produces a listing of raw symbols followed by their C names.  For example:

          $ eval "$NM progname | $global_symbol_pipe"
          D SYMBOL1 C-SYMBOL1
          T SYMBOL2 C-SYMBOL2
          C SYMBOL3 C-SYMBOL3
          ...
          $

     The first column contains the symbol type (used to tell data from code on some platforms), but its meaning is system dependent.

 -- Variable: global_symbol_to_cdecl
     A pipeline that translates the output of GLOBAL_SYMBOL_PIPE into proper C declarations.  On platforms whose linkers differentiate code from data, such as HP/UX, data symbols will be declared as such, and code symbols will be declared as functions.  On platforms that don't care, everything is assumed to be data.

 -- Variable: hardcode_action
     Either immediate or relink, depending on whether shared library paths can be hardcoded into executables before they are installed, or if they need to be relinked.

 -- Variable: hardcode_direct
     Set to yes or no, depending on whether the linker hardcodes directories if a library is directly specified on the command line (such as DIR/libNAME.a) when HARDCODE_LIBDIR_FLAG_SPEC is specified.

 -- Variable: hardcode_into_libs
     Whether the platform supports hardcoding of run-paths into libraries. If enabled, linking of programs will be much simpler but libraries will need to be relinked during installation.   Set to yes or no.

 -- Variable: hardcode_libdir_flag_spec
     Flag to hardcode a LIBDIR variable into a binary, so that the dynamic linker searches LIBDIR for shared libraries at runtime. If it is empty, libtool will try to use some other hardcoding mechanism.

 -- Variable: hardcode_libdir_separator
     If the compiler only accepts a single HARDCODE_LIBDIR_FLAG, then this variable contains the string that should separate multiple arguments to that flag.

 -- Variable: hardcode_minus_L
     Set to yes or no, depending on whether the linker hardcodes directories specified by -L flags into the resulting executable when HARDCODE_LIBDIR_FLAG_SPEC is specified.

 -- Variable: hardcode_shlibpath_var
     Set to yes or no, depending on whether the linker hardcodes directories by writing the contents of $shlibpath_var into the resulting executable when HARDCODE_LIBDIR_FLAG_SPEC is specified.  Set to unsupported if directories specified by $shlibpath_var are searched at run time, but not at link time.

 -- Variable: host
 -- Variable: host_alias
     For information purposes, set to the specified and canonical names of the system that libtool was configured for.

 -- Variable: include_expsyms
     List of symbols that must always be exported when using EXPORT_SYMBOLS.

 -- Variable: libext
     The standard old archive suffix (normally "a").

 -- Variable: libname_spec
     The format of a library name prefix.  On all Unix systems, static libraries are called libNAME.a, but on some systems (such as OS/2 or MS-DOS), the library is just called NAME.a.

 -- Variable: library_names_spec
     A list of shared library names.  The first is the name of the file, the rest are symbolic links to the file.  The name in the list is the file name that the linker finds when given -lNAME.

 -- Variable: link_all_deplibs
     Whether libtool must link a program against all its dependency libraries. Set to yes or no.  Default is unknown, which is a synonym for yes.

 -- Variable: link_static_flag
     Linker flag (passed through the C compiler) used to prevent dynamic linking.

 -- Variable: need_lib_prefix
     Whether libtool should automatically prefix module names with 'lib'. Set to yes or no.  By default, it is unknown, which means the same as yes, but documents that we are not really sure about it. yes means that it is possible both to dlopen and to link against a library without 'lib' prefix, i.e., it requires HARDCODE_DIRECT to be yes.

 -- Variable: need_version
     Whether versioning is required for libraries, i.e. whether the dynamic linker requires a version suffix for all libraries. Set to yes or no.  By default, it is unknown, which means the same as yes, but documents that we are not really sure about it.

 -- Variable: need_locks
     Whether files must be locked to prevent conflicts when compiling simultaneously. Set to yes or no.

 -- Variable: no_builtin_flag
     Compiler flag to disable builtin functions that conflict with declaring external global symbols as char.

 -- Variable: no_undefined_flag
     The flag that is used by archive_cmds in order to declare that there will be no unresolved symbols in the resulting shared library. Empty, if no such flag is required.

 -- Variable: objdir
     The name of the directory that contains temporary libtool files.

 -- Variable: objext
     The standard object file suffix (normally "o").

 -- Variable: pic_flag
     Any additional compiler flags for building library object files.

 -- Variable: postinstall_cmds
 -- Variable: old_postinstall_cmds
     Commands run after installing a shared or static library, respectively.

 -- Variable: postuninstall_cmds
 -- Variable: old_postuninstall_cmds
     Commands run after uninstalling a shared or static library, respectively.

 -- Variable: reload_cmds
 -- Variable: reload_flag
     Commands to create a reloadable object.

 -- Variable: runpath_var
     The environment variable that tells the linker which directories to hardcode in the resulting executable.

 -- Variable: shlibpath_overrides_runpath
     Indicates whether it is possible to override the hard-coded library search path of a program with an environment variable.  If this is set to no, libtool may have to create two copies of a program in the build tree, one to be installed and one to be run in the build tree only. When each of these copies is created depends on the value of fast_install.  The default value is unknown, which is equivalent to no.

 -- Variable: shlibpath_var
     The environment variable that tells the dynamic linker where to find shared libraries.

 -- Variable: soname_spec
     The name coded into shared libraries, if different from the real name of the file.

 -- Variable: striplib
 -- Variable: old_striplib
     Command to strip a shared (striplib) or static (old_striplib) library, respectively.  If these variables are empty, the strip flag in the install mode will be ignored for libraries (see Install mode).

 -- Variable: sys_lib_dlsearch_path_spec
     Expression to get the run-time system library search path.  Directories that appear in this list are never hard-coded into executables.

 -- Variable: sys_lib_search_path_spec
     Expression to get the compile-time system library search path.  This variable is used by libtool when it has to test whether a certain library is shared or static.  The directories listed in SHLIBPATH_VAR are automatically appended to this list, every time libtool runs (i.e., not at configuration time), because some linkers use this variable to extend the library search path.  Linker switches such as -L also augment the search path.

 -- Variable: thread_safe_flag_spec
     Linker flag (passed through the C compiler) used to generate thread-safe libraries.

 -- Variable: version_type
     The library version numbering type.  One of libtool, freebsd-aout, freebsd-elf, irix, linux, osf, sunos, windows, or none.

 -- Variable: whole_archive_flag_spec
     Compiler flag to generate shared objects from convenience archives.

 -- Variable: wl
     The C compiler flag that allows libtool to pass a flag directly to the linker.  Used as: ${wl}SOME-FLAG.

Variables ending in _cmds or _eval contain a ~-separated list of commands that are evaled one after another.  If any of the commands return a nonzero exit status, libtool generally exits with an error message.

Variables ending in _spec are evaled before being used by libtool.

Cheap tricks
============

Here are a few tricks that you can use in order to make maintainership easier:

  * When people report bugs, ask them to use the --config, --debug, or --features flags, if you think they will help you.  These flags are there to help you get information directly, rather than having to trust second-hand observation.

  * Rather than reconfiguring libtool every time I make a change to ltmain.in, I keep a permanent libtool script in my PATH, which sources ltmain.in directly.

     The following steps describe how to create such a script, where /home/src/libtool is the directory containing the libtool source tree, /home/src/libtool/libtool is a libtool script that has been configured for your platform, and ~/bin is a directory in your PATH:

          trick$ cd ~/bin
          trick$ sed '/^# ltmain\.sh/q' /home/src/libtool/libtool > libtool
          trick$ echo '. /home/src/libtool/ltmain.in' >> libtool
          trick$ chmod +x libtool
          trick$ libtool --version
          ltmain.sh (GNU @PACKAGE@) @VERSION@@TIMESTAMP@
          trick$

The output of the final libtool --version command shows that the ltmain.in script is being used directly.  Now, modify ~/bin/libtool or /home/src/libtool/ltmain.in directly in order to test new changes without having to rerun configure.

     [file fdl.texi not included]