/* $Id: tunemode.c,v 1.7 2005/07/30 11:58:39 cegger Exp $
***********************************************************************

   Copyright (C) 1998 Andreas Beck   becka@ggi-project.org

   User mode program for timing-list-driver. Allows interactive adjust-
   ment of modes.

   This software is placed in the public domain and can be used freely
   for any purpose. It comes without any kind of warranty, either
   expressed or implied, including, but not limited to the implied
   warranties of merchantability or fitness for a particular purpose.
   Use it at your own risk. the author is not responsible for any damage
   or consequences raised by use or inability to use this program.

***********************************************************************
*/

/* NEVER do this in your own programs. They will break without warning. */

#include <kgi/kgi.h>
#include <kgi/kgi_commands.h>

#include <ggi/ggi.h>

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>

#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <sys/mman.h>


/* We want to draw circles, but not use LibGGI2D.
 */
#include "mycircle.inc"

ggi_visual_t vis;

int widthx, widthy;

struct kgi_monitor mondesc = {
	"Unknown Manufacturer",
	"Unknown Model",
	0,
	0,
	{800, 600},
	{285, 213},		/* Phys size. */
	0,			/* disptype */
	0,			/* syntype */
	{0, 0},			/* bandwidth */
	{0, 0},			/* hfreq */
	{0, 0},			/* vfreq */
	{0, 0, 0},		/* white */
	1,			/* gamma */
};

struct kgi_preset prefmode[50] = { {25175000,
				    {640, 640, 680, 776, 784, 800, 0},
				    {400, 407, 412, 414, 442, 449, 1}
				    },
};

int pref_num = 1;

struct kgi_monitor *mondptr = &mondesc;
struct kgi_preset trymode;
struct kgi_preset oldmode;

static int verbose = 2;

void beep(void)
{
	fputs("\a", stderr);
}

void toup(char *what)
{
	do {
		*what = toupper((uint8_t)*what);
	} while (*what++);
}

#define verb(a,b) do{ if (verbose>=a) printf(b,token);}while(0)

int ggi_ioctl(int arg, void *data)
{
	return ioctl(vis->fd, arg, data);
}

void parse_file(char *name)
{
	char buffer[1024], *token;
	double hlp;
	int ignoreflag = 1;
	FILE *infile;

	if ((infile = fopen(name, "r")) == NULL)
		ggiPanic("Can't open input-file !");

	while (!feof(infile)) {
		fgets(buffer, 1024, infile);
		if (*buffer == '#' || *buffer == '\n')
			continue;
		toup(buffer);
		token = strtok(buffer, " \t\n");
		if (strcmp(token, "SECTION") == 0) {
			if (strcmp(strtok(NULL, "\" "), "MONITOR") == 0)
				ignoreflag = 0;
		}
		if (ignoreflag)
			continue;
		if (strcmp(token, "ENDSECTION") == 0)
			break;
		else if (strcmp(token, "MODELINE") == 0) {
			token = strtok(NULL, "\" ");
			verb(1, "Loading Mode: %s\n");
			sscanf(token = strtok(NULL, " \t\n"), "%lf", &hlp);
			verb(2, "%s  ");
			prefmode[pref_num].dclk = 1000000 * hlp;	/* MHz ! */
			prefmode[pref_num].x.width = atoi(token =
							  strtok(NULL,
								 " \t\n"));
			verb(2, "%s ");
			prefmode[pref_num].x.blankstart =
			    prefmode[pref_num].x.syncstart = atoi(token =
								  strtok
								  (NULL,
								   " \t\n"));
			verb(2, "%s ");
			prefmode[pref_num].x.blankend =
			    prefmode[pref_num].x.syncend = atoi(token =
								strtok
								(NULL,
								 " \t\n"));
			verb(2, "%s ");
			prefmode[pref_num].x.total = atoi(token =
							  strtok(NULL,
								 " \t\n"));
			verb(2, "%s  ");
			prefmode[pref_num].y.width = atoi(token =
							  strtok(NULL,
								 " \t\n"));
			verb(2, "%s ");
			prefmode[pref_num].y.blankstart =
			    prefmode[pref_num].y.syncstart = atoi(token =
								  strtok
								  (NULL,
								   " \t\n"));
			verb(2, "%s ");
			prefmode[pref_num].y.blankend =
			    prefmode[pref_num].y.syncend = atoi(token =
								strtok
								(NULL,
								 " \t\n"));
			verb(2, "%s ");
			prefmode[pref_num].y.total = atoi(token =
							  strtok(NULL,
								 " \t\n"));
			verb(2, "%s\n");
			if ((token = strtok(NULL, " \t\n"))) {
				puts("Warning: Flags are not yet handled !");
			}
			pref_num++;
		} else if (strcmp(token, "VENDORNAME") == 0) {
			token = strtok(NULL, "\" ");
			verb(1, "Manufacturer : %s\n");
			ggstrlcpy(mondesc.manufact, token,
				sizeof(mondesc.manufact));
		} else if (strcmp(token, "MODELNAME") == 0) {
			token = strtok(NULL, "\" ");
			verb(1, "Model : %s\n");
			ggstrlcpy(mondesc.model, token,
				sizeof(mondesc.model));
		} else if (strcmp(token, "BANDWIDTH") == 0) {
			puts(token = strtok(NULL, "-"));
		} else if (strcmp(token, "HORIZSYNC") == 0) {
			sscanf(token = strtok(NULL, "-"), "%lf", &hlp);
			mondesc.hfreq.min = hlp * 1000;
			verb(1, "HSync : %s - ");
			sscanf(token = strtok(NULL, " \t\n"), "%lf", &hlp);
			mondesc.hfreq.max = hlp * 1000;
			verb(1, "%s\n");
		} else if (strcmp(token, "VERTREFRESH") == 0) {
			mondesc.vfreq.min = atoi(token =
						 strtok(NULL, "-"));
			verb(1, "VSync : %s - ");
			mondesc.vfreq.max = atoi(token =
						 strtok(NULL, " \t\n,"));
			verb(1, "%s\n");
		}
	}
	if (ggi_ioctl(MONITOR_SETINFO, &mondptr)) {
		perror("ggi_ioctl : ");
	}
}

#define ggiPrintf(vis,x,y,args...) \
	do { char buffer[1024]; sprintf(buffer,args); ggiPuts(vis,x,y,buffer); } while(0)

enum movemode { MM_MOVE = 0x000000,
	MM_RESIZE = 0x010000,
	MM_POLARITY = 0x020000,
	MM_SYNCWIDTH = 0x030000,
	MM_BMOVE = 0x040000,
	MM_BRESIZE = 0x050000,
	MM_STEP = 0x010000
};

char *mmstring[] = { "Move", "Resize",
	"Polarity", "Syncwidth",
	"BlankMove", "BlankResize"
};

void testpic(struct kgi_preset *pp, enum movemode mm)
{
	int mx, my, x;
	static ggi_color pal[256] = { {0x0000, 0x0000, 0xff00},	/* blue */
	{0xff00, 0xff00, 0xff00},	/* white */
	{0x8000, 0x8000, 0x8000},	/* grey  */
	{0xff00, 0x8000, 0x8000},	/* ltred */
	{0xa000, 0xa000, 0xa000},	/* ltgrey */
	{0x5000, 0xff00, 0x5000},	/* green */
	{0x0000, 0x0000, 0x0000},	/* black */
	};


	ggiSetPalette(vis, 0, 7, pal);
	ggiSetGCForeground(vis, 6);
	ggiSetGCBackground(vis, 6);
	ggiFillscreen(vis);
	ggiSetGCForeground(vis, 1);
	ggiDrawHLine(vis, 0, 0, widthx);
	ggiDrawHLine(vis, 0, widthy - 1, widthx);
	ggiDrawVLine(vis, 0, 0, widthy);
	ggiDrawVLine(vis, widthx - 1, 0, widthy);

	ggiSetGCForeground(vis, 2);
	for (x = (mx = (widthx / 2)) % 50; x < widthx - 1; x += 50)
		if (x > 0)
			ggiDrawVLine(vis, x, 1, widthy - 2);
	for (x = (my = (widthy / 2)) % 50; x < widthy - 1; x += 50)
		if (x > 0)
			ggiDrawHLine(vis, 1, x, widthx - 2);

	ggiSetGCForeground(vis, 3);
	for (x = 1; x < 20; x++) {
		ggiDrawPixel(vis, x, x);
		ggiDrawPixel(vis, widthx - 1 - x, x);
		ggiDrawPixel(vis, widthx - 1 - x, widthy - 1 - x);
		ggiDrawPixel(vis, x, widthy - 1 - x);
	}

	ggiSetGCForeground(vis, 4);
	myDrawCircle(vis, mx, my, my - my % 10 - 10);

	ggiSetGCForeground(vis, 5);
	ggiPrintf(vis, 10, my + 1,
		  "        wdth blnk sync send bend total");
	ggiPrintf(vis, 10, my + 17, "Xsync%c: %4d %4d %4d %4d %4d %4d",
		  pp->x.polarity > 0 ? '+' : '-', pp->x.width,
		  pp->x.blankstart, pp->x.syncstart, pp->x.syncend,
		  pp->x.blankend, pp->x.total);
	ggiPrintf(vis, 10, my + 33, "Ysync%c: %4d %4d %4d %4d %4d %4d",
		  pp->y.polarity > 0 ? '+' : '-', pp->y.width,
		  pp->y.blankstart, pp->y.syncstart, pp->y.syncend,
		  pp->y.blankend, pp->y.total);
	ggiPrintf(vis, 10, my + 49, "Freq  : %5.3fMhz/%5.2fkHz/%5.2fHz",
		  pp->dclk / 1000000.0, 0.001 * pp->dclk / pp->x.total,
		  1.0 * pp->dclk / pp->x.total / pp->y.total);
	ggiPrintf(vis, 10, my + 66, "Press 'h' for help.");
	ggiPrintf(vis, 10 + 150, my + 66, mmstring[mm / MM_STEP]);
}

void cls(void)
{
	printf("\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n");
}

void interactive(int wantx, int wanty)
{
	int y;

	enum movemode mmode = 0;

	cls();

	oldmode.x.width = wantx;
	oldmode.y.width = wanty;
	if (ggi_ioctl(MONITOR_GETPRESETMODE, &oldmode)) {
		perror("getpresetmode : ");
	}
	trymode = oldmode;
	while (1) {
		if (ggi_ioctl(MONITOR_SETPRESETMODE, &trymode)) {
			perror("setpresetmode : ");
		}
#ifdef DEBUG
		printf("trymode: x: %d %d %d %d %d %d\n"
		       "         y: %d %d %d %d %d %d\n",
		       trymode.x.width, trymode.x.blankstart,
		       trymode.x.syncstart, trymode.x.syncend,
		       trymode.x.blankend, trymode.x.total,
		       trymode.y.width, trymode.y.blankstart,
		       trymode.y.syncstart, trymode.y.syncend,
		       trymode.y.blankend, trymode.y.total);
#endif

		if (ggiSetSimpleMode(vis, widthx, widthy, 1, GT_8BIT))
			return;

		testpic(&trymode, mmode);
	      retry:
		switch ((y = ggiGetc(vis)) | mmode) {
		case MM_MOVE | GIIK_Left:
			if (trymode.x.syncend + 8 < trymode.x.total) {
				trymode.x.syncstart += 8;
				trymode.x.syncend += 8;
				if (trymode.x.blankend < trymode.x.syncend)
					trymode.x.blankend += 8;
			} else
				beep();
			break;
		case MM_MOVE | GIIK_Right:
			if (trymode.x.syncstart - 8 > trymode.x.width) {
				trymode.x.syncstart -= 8;
				trymode.x.syncend -= 8;
				if (trymode.x.blankstart >
				    trymode.x.syncstart)
					trymode.x.blankstart -= 8;
			} else
				beep();
			break;
		case MM_MOVE | GIIK_Up:
			if (trymode.y.syncend + 1 < trymode.y.total) {
				trymode.y.syncstart++;
				trymode.y.syncend++;
				if (trymode.y.blankend < trymode.y.syncend)
					trymode.y.blankend++;
			} else
				beep();
			break;
		case MM_MOVE | GIIK_Down:
			if (trymode.y.syncstart - 1 > trymode.y.width) {
				trymode.y.syncstart--;
				trymode.y.syncend--;
				if (trymode.y.blankstart >
				    trymode.y.syncstart)
					trymode.y.blankstart--;
			} else
				beep();
			break;
		case MM_BMOVE | GIIK_Right:
			if (trymode.x.blankend + 8 <= trymode.x.total &&
			    trymode.x.blankstart + 8 <=
			    trymode.x.syncstart) {
				trymode.x.blankstart += 8;
				trymode.x.blankend += 8;
			} else
				beep();
			break;
		case MM_BMOVE | GIIK_Left:
			if (trymode.x.blankstart - 8 >= trymode.x.width &&
			    trymode.x.blankend - 8 >= trymode.x.syncend) {
				trymode.x.blankstart -= 8;
				trymode.x.blankend -= 8;
			} else
				beep();
			break;
		case MM_BMOVE | GIIK_Down:
			if (trymode.y.blankend + 1 <= trymode.y.total &&
			    trymode.y.blankstart + 1 <=
			    trymode.y.syncstart) {
				trymode.y.blankstart++;
				trymode.y.blankend++;
			} else
				beep();
			break;
		case MM_BMOVE | GIIK_Up:
			if (trymode.y.blankstart - 1 >= trymode.y.width &&
			    trymode.y.blankend - 1 >= trymode.y.syncend) {
				trymode.y.blankstart--;
				trymode.y.blankend--;
			} else
				beep();
			break;
		case MM_BRESIZE | GIIK_Right:
			if (trymode.x.blankend + 8 <= trymode.x.total)
				trymode.x.blankend += 8;
			if (trymode.x.blankstart - 8 >= trymode.x.width)
				trymode.x.blankstart -= 8;
			break;
		case MM_BRESIZE | GIIK_Left:
			if (trymode.x.blankstart + 8 <=
			    trymode.x.syncstart)
				trymode.x.blankstart += 8;
			if (trymode.x.blankend - 8 >= trymode.x.syncend)
				trymode.x.blankend -= 8;
			break;
		case MM_BRESIZE | GIIK_Down:
			if (trymode.y.blankend + 1 <= trymode.y.total)
				trymode.y.blankend += 1;
			if (trymode.y.blankstart - 1 >= trymode.y.width)
				trymode.y.blankstart -= 1;
			break;
		case MM_BRESIZE | GIIK_Up:
			if (trymode.y.blankstart + 1 <=
			    trymode.y.syncstart)
				trymode.y.blankstart += 1;
			if (trymode.y.blankend - 1 >= trymode.y.syncend)
				trymode.y.blankend -= 1;
			break;
		case MM_RESIZE | GIIK_Up:
			if (trymode.y.total - 1 > trymode.y.blankend)
				trymode.y.total--;
			else
				beep();
			break;
		case MM_RESIZE | GIIK_Down:
			trymode.y.total++;
			break;
		case MM_RESIZE | GIIK_Left:
			if (trymode.x.total - 8 > trymode.x.blankend)
				trymode.x.total -= 8;
			else
				beep();
			break;
		case MM_RESIZE | GIIK_Right:
			trymode.x.total += 8;
			break;
		case MM_POLARITY | GIIK_Left:
			trymode.x.polarity = 0;
			break;
		case MM_POLARITY | GIIK_Right:
			trymode.x.polarity = 1;
			break;
		case MM_POLARITY | GIIK_Up:
			trymode.y.polarity = 0;
			break;
		case MM_POLARITY | GIIK_Down:
			trymode.y.polarity = 1;
			break;
		case 'h':
		case 'H':
			/* Display help ... */
			break;
		case MM_SYNCWIDTH | GIIK_Left:
			if (trymode.x.syncend - 8 > trymode.x.syncstart)
				trymode.x.syncend -= 8;
			else
				beep();
			break;
		case MM_SYNCWIDTH | GIIK_Right:
			if (trymode.x.syncend + 8 < trymode.x.total) {
				trymode.x.syncend += 8;
				if (trymode.x.blankend < trymode.x.syncend)
					trymode.x.blankend += 8;
			} else
				beep();
			break;
		case MM_SYNCWIDTH | GIIK_Up:
			if (trymode.y.syncend - 1 > trymode.y.syncstart)
				trymode.y.syncend--;
			else
				beep();
			break;
		case MM_SYNCWIDTH | GIIK_Down:
			if (trymode.y.syncend + 1 < trymode.y.total) {
				trymode.y.syncend++;
				if (trymode.y.blankend < trymode.y.syncend)
					trymode.y.blankend++;
			} else
				beep();
			break;
		}
		switch (y) {
		case GIIK_Enter:
			oldmode = trymode;
			break;
		case GIIK_Left:
		case GIIK_Right:
		case GIIK_Up:
		case GIIK_Down:
		case 27:
			break;
		case 'h':
		case 'H':	/* Display help ... */
			break;
		case 'm':
		case 'M':
			mmode = MM_MOVE;
			break;
		case 'r':
		case 'R':
			mmode = MM_RESIZE;
			break;
		case 'p':
		case 'P':
			mmode = MM_POLARITY;
			break;
		case 's':
		case 'S':
			mmode = MM_SYNCWIDTH;
			break;
		case 'b':
		case 'B':
			mmode = MM_BMOVE;
			break;
		case 'e':
		case 'E':
			mmode = MM_BRESIZE;
			break;

		default:
			printf("Unknown key: 0x%x\n", y);
			goto retry;
		}
		if (y == GIIK_Enter || y == 27)
			break;
	}
	if (ggi_ioctl(MONITOR_SETPRESETMODE, &oldmode)) {
		perror("setpresetmode : ");
	}
}

#if 0

void download(void)
{
	int x;

	if (ggi_ioctl(MONITOR_CLEARPREF, NULL))
		ggiPanic
		    ("Clear preferred modes failed.Is the timelist-driver loaded ?");

	for (x = 0; x < pref_num; x++) {
		prefptr = &prefmode[x];
		if (ggi_ioctl(MONITOR_SETPREFMODE, &prefptr)) {
			perror("setprefmode : ");
		}
	}
}

void save(char *name)
{
	int x;
	FILE *out;

	if ((out = fopen(name, "w")) == NULL) {
		perror("save : ");
		return;
	}

	fputs("SECTION \"MONITOR\"\n", out);
	fprintf(out, "VENDORNAME \"%s\"\n", mondesc.manufact);
	fprintf(out, "MODELNAME \"%s\"\n", mondesc.model);
	fprintf(out, "HORIZSYNC %d-%d\n", mondesc.hfreq.min / 1000,
		mondesc.hfreq.max / 1000);
	fprintf(out, "VERTREFRESH %d-%d\n", mondesc.vfreq.min,
		mondesc.vfreq.max);
	for (x = 1; x < pref_num; x++) {
		prefptr = &prefmode[x];
		fprintf(out,
			"ModeLine \"%dx%d\"\t %4.3f %5d %5d %5d %5d  %5d %5d %5d %5d\n",
			prefptr->x.width, prefptr->y.width,
			prefptr->clock / 1000000.0, prefptr->xwidth,
			prefptr->xsyncstart, prefptr->xsyncend,
			prefptr->xend, prefptr->ywidth,
			prefptr->ysyncstart, prefptr->ysyncend,
			prefptr->yend);
	}
	fputs("ENDSECTION\n", out);

}
#endif

int main(int argc, char *argv[])
{
	int x, y;

	if (argc < 3) {

		fprintf(stderr, "usage: %s sizex sizey\n", argv[0]);
		return 1;
	}

	if (ggiInit() != 0) {
		fprintf(stderr,
			"%s: unable to initialize LibGGI, exiting.\n",
			argv[0]);
		exit(1);
	}
	widthx = x = atoi(argv[1]);
	widthy = y = atoi(argv[2]);

	if ((vis = ggiOpen(NULL)) == NULL) {
		fprintf(stderr,
			"%s: unable to open default visual, exiting.\n",
			argv[0]);
		exit(1);
	}

	/* Make sure at least 640x400 is reasonable for crash-recovery */
	if (ggi_ioctl(MONITOR_SETPRESETMODE, &prefmode[0])) {
		perror("setprefmode : ");
	}

	if (ggiSetSimpleMode(vis, widthx, widthy, 1, GT_8BIT))
		return 1;
	if (x < 400)
		x *= 2;
	if (y < 300)
		y *= 2;

	/* Fixme ... need something better : */


#if 0
	parse_file(argv[1]);

	if (argc < 3)
		download();
	else {
		interactive();
		download();
		save(argv[2]);
	}
#endif

	interactive(x, y);

	ggiExit();
	return (0);
}