srcdir = .
top_srcdir = .

top_builddir = .
my_dir = .
INSTALL = /usr/bin/install -c -o root -g wheel

# Beginning of file MCONFIG

all::

check::

SHELL = /bin/sh

COMPRESS_EXT = gz bz2 bz Z

prefix = 
root_prefix = 
exec_prefix = ${prefix}
root_bindir = ${exec_prefix}/bin
root_sbindir = ${exec_prefix}/sbin
root_libdir = ${exec_prefix}/lib
datarootdir = ${prefix}/share
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libdir = ${exec_prefix}/lib
datadir= ${datarootdir}
localedir = $(datadir)/locale
root_sysconfdir= ${prefix}/etc
includedir = ${prefix}/include
mandir = ${datarootdir}/man
man1dir = $(mandir)/man1
man3dir = $(mandir)/man3
man5dir = $(mandir)/man5
man8dir = $(mandir)/man8
infodir = ${datarootdir}/info
datadir = ${datarootdir}



CC = cc
BUILD_CC = cc
DEFS = -DLOCALEDIR=\"$(localedir)\" -DROOT_SYSCONFDIR=\"$(root_sysconfdir)\" -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DENABLE_HTREE=1 -DENABLE_SWAPFS=1 -DPACKAGE=\"e2fsprogs\" -DVERSION=\"0.14.1\" -Dconst= -Dsigned= -Dinline= -Doff_t=long\ int -Dsize_t=unsigned\ int -DHAVE_LONG_LONG=1 -DHAVE_POSIX_PRINTF=1 -DHAVE_ALLOCA_H=1 -DHAVE_ALLOCA=1 -DHAVE_GETPAGESIZE=1 -DINTDIV0_RAISES_SIGFPE=1 -DHAVE_UNSIGNED_LONG_LONG=1 -Duintmax_t=unsigned\ long\ long -DSIZE_MAX=4294967295U -Dptrdiff_t=long -DHAVE_LIMITS_H=1 -DHAVE_LOCALE_H=1 -DHAVE_NL_TYPES_H=1 -DHAVE_STDDEF_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_ASPRINTF=1 -DHAVE_FWPRINTF=1 -DHAVE_GETCWD=1 -DHAVE_GETEGID=1 -DHAVE_GETEUID=1 -DHAVE_GETGID=1 -DHAVE_GETUID=1 -DHAVE_MUNMAP=1 -DHAVE_PUTENV=1 -DHAVE_SETENV=1 -DHAVE_SETLOCALE=1 -DHAVE_SNPRINTF=1 -DHAVE_STPCPY=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRTOUL=1 -DHAVE_TSEARCH=1 -DHAVE_WCSLEN=1 -DHAVE_DECL__SNPRINTF=0 -DHAVE_DECL__SNWPRINTF=0 -DHAVE_DECL_FEOF_UNLOCKED=0 -DHAVE_DECL_FGETS_UNLOCKED=0 -DHAVE_DECL_GETC_UNLOCKED=0 -DHAVE_ICONV=1 -DICONV_CONST=const -DHAVE_LANGINFO_CODESET=1 -DHAVE_LC_MESSAGES=1 -DENABLE_NLS=1 -DHAVE_STDARG_H=1 -DHAVE_ERRNO_H=1 -DHAVE_MALLOC_H=1 -DHAVE_PATHS_H=1 -DHAVE_DIRENT_H=1 -DHAVE_GETOPT_H=1 -DHAVE_SETJMP_H=1 -DHAVE_SIGNAL_H=1 -DHAVE_TERMIOS_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_SYS_MMAN_H=1 -DHAVE_SYS_QUEUE_H=1 -DHAVE_SYS_SOCKIO_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_SYS_WAIT_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_NET_IF_DL_H=1 -DHAVE_NETINET_IN_H=1 -DHAVE_UTIME_H=1 -DHAVE_VPRINTF=1 -DSIZEOF_SHORT=2 -DSIZEOF_INT=4 -DSIZEOF_LONG=4 -DSIZEOF_LONG_LONG=8 -DHAVE_CHFLAGS=1 -DHAVE_GETRUSAGE=1 -DHAVE_GETMNTINFO=1 -DHAVE_STRTOULL=1 -DHAVE_STRCASECMP=1 -DHAVE_SRANDOM=1 -DHAVE_JRAND48=1 -DHAVE_FCHOWN=1 -DHAVE_STRPTIME=1 -DHAVE_STRDUP=1 -DHAVE_SYSCONF=1 -DHAVE_PATHCONF=1 -DHAVE_VALLOC=1 -DHAVE_MMAP=1 -DHAVE_UTIME=1 -DHAVE_DLOPEN=1 -DHAVE_OPTRESET=1
CFLAGS = -fno-common
CPPFLAGS =  -I$(top_builddir)/lib -I$(top_srcdir)/lib  -I/mnt/gmirror/ports/sysutils/e2fsprogs/work/e2fsprogs-1.40.3/lib  -I/usr/local/include -D_EXT2_USE_C_VERSIONS_
INTL_FLAGS = -I$(top_builddir)/intl -I$(top_srcdir)/intl
ALL_CFLAGS = $(CPPFLAGS) $(DEFS) $(USE_WFLAGS) $(CFLAGS) $(XTRA_CFLAGS) \
	$(INTL_FLAGS) $(LINUX_INCLUDE) 
LDFLAGS = 
ALL_LDFLAGS = $(LDFLAGS)
BUILD_CFLAGS = -fno-common
BUILD_LDFLAGS = 
RM = /usr/local/bin/rm
LN = /usr/local/bin/ln
LN_S = ln -s
MV = /usr/local/bin/mv
CP = /usr/local/bin/cp
CHMOD = /usr/local/bin/chmod
AR = ar
AWK = gawk
SED = /usr/local/bin/sed
PERL = /usr/local/bin/perl
RANLIB = ranlib
STRIP = strip
LD = $(PURE) cc
ARUPD = $(AR) r
ARGEN = $(AR) rc
LDCONFIG = /usr/local/bin/ldconfig
INSTALL_PROGRAM = install  -s -o root -g wheel -m 555
INSTALL_DATA = install  -o root -g wheel -m 444
INSTALL_SCRIPT = install  -o root -g wheel -m 555
MKINSTALLDIRS = $(top_builddir)/config/mkinstalldirs

#
# Library definitions
#
DEVMAPPER_LIBS = 
STATIC_DEVMAPPER_LIBS = 

LIB = $(top_builddir)/lib
LIBSS = $(LIB)/libss.a
LIBCOM_ERR = $(LIB)/libcom_err.a
LIBE2P = $(LIB)/libe2p.a
LIBEXT2FS = $(LIB)/libext2fs.a
LIBUUID = $(LIB)/libuuid.a  
LIBBLKID = $(LIB)/libblkid.a
LIBINTL = ${top_builddir}/intl/libintl.a -liconv
DEPLIBUUID = $(LIB)/libuuid.a
DEPLIBBLKID = $(LIB)/libblkid.a

STATIC_LIBSS = $(LIB)/libss.a
STATIC_LIBCOM_ERR = $(LIB)/libcom_err.a
STATIC_LIBE2P = $(LIB)/libe2p.a
STATIC_LIBEXT2FS = $(LIB)/libext2fs.a
STATIC_LIBUUID = $(LIB)/libuuid.a  
STATIC_LIBBLKID = $(LIB)/libblkid.a $(STATIC_DEVMAPPER_LIBS)
DEPSTATIC_LIBUUID = $(LIB)/libuuid.a
DEPSTATIC_LIBBLKID = $(LIB)/libblkid.a

PROFILED_LIBSS = $(LIB)/libss
PROFILED_LIBCOM_ERR = $(LIB)/libcom_err
PROFILED_LIBE2P = $(LIB)/libe2p
PROFILED_LIBEXT2FS = $(LIB)/libext2fs
PROFILED_LIBUUID = $(LIB)/libuuid  
PROFILED_LIBBLKID = $(LIB)/libblkid
DEPPROFILED_LIBUUID = $(LIB)/libuuid
DEPPROFILED_LIBBLKID = $(LIB)/libblkid

# An include directive pointing to a directory holding enough linux-like
# include files to satisfy some programs here
LINUX_INCLUDE=-I$(top_builddir)/include

#
# A fast substitution command for fixing up man pages, shell scripts, etc.
#
SUBST_CONF=$(top_builddir)/util/subst.conf
SUBSTITUTE= $(top_builddir)/util/subst -f $(SUBST_CONF)
SUBSTITUTE_UPTIME= $(top_builddir)/util/subst -t -f $(SUBST_CONF)
DEP_SUBSTITUTE= $(top_builddir)/util/subst $(SUBST_CONF)

$(top_builddir)/util/subst:
	cd $(top_builddir)/util ; $(MAKE) subst

#
# Warning flags
#
# Run make gcc-wall to do a build with warning messages.
#
#
WFLAGS=		-std=c99 -D_XOPEN_SOURCE=600 -D_GNU_SOURCE \
			-pedantic $(WFLAGS_EXTRA) \
			-Wall -W -Wwrite-strings -Wpointer-arith \
			-Wcast-qual -Wcast-align -Wno-variadic-macros \
			-Wstrict-prototypes -Wmissing-prototypes \
			-Wformat-security  -Wformat-nonliteral \
			-Wmissing-format-attribute -O2 -Wstrict-aliasing \
			-Wnested-externs -Winline -DNO_INLINE_FUNCS -Wshadow \
			-UENABLE_NLS

gcc-wall-new:
	(make USE_WFLAGS="$(WFLAGS)" > /dev/null) 2>&1 | sed -f $(top_srcdir)/util/gcc-wall-cleanup 

gcc-wall:
	make clean > /dev/null
	make gcc-wall-new

#
# Installation user and groups
#
BINGRP=		bin
BINOWN=		bin
BINMODE=	555
INCGRP=		bin
INCOWN=		bin
INCMODE=	444
LIBOWN=		bin
LIBGRP=		bin
LIBMODE=	444
MANGRP=		bin
MANOWN=		bin
MANMODE=	444

#
# Autoconf magic...
#

DEP_LIB_MAKEFILES = $(top_srcdir)/lib/Makefile.elf-lib  \
	$(top_srcdir)/lib/Makefile.bsd-lib $(top_srcdir)/lib/Makefile.darwin-lib \
	$(top_srcdir)/lib/Makefile.solaris-lib $(top_srcdir)/lib/Makefile.checker \
	$(top_srcdir)/lib/Makefile.profile

$(top_builddir)/config.status: $(top_srcdir)/configure
	cd $(top_builddir); ./config.status --recheck

$(top_builddir)/MCONFIG: $(top_srcdir)/MCONFIG.in $(top_builddir)/config.status
	cd $(top_builddir); CONFIG_FILES=MCONFIG ./config.status

$(top_builddir)/lib/substitute_sh: $(top_srcdir)/lib/substitute_sh.in \
		$(top_builddir)/config.status
	cd $(top_builddir); CONFIG_FILES=lib/substitute_sh ./config.status

$(top_builddir)/util/subst.conf: $(top_srcdir)/util/subst.conf.in \
		$(top_builddir)/config.status
	cd $(top_builddir); CONFIG_FILES=util/subst.conf ./config.status

Makefile: $(srcdir)/Makefile.in $(top_builddir)/MCONFIG \
		$(DEP_MAKEFILE) $(top_builddir)/config.status
	cd $(top_builddir); CONFIG_FILES=$(my_dir)/Makefile ./config.status

#$(top_srcdir)/configure: $(top_srcdir)/configure.in
#	cd $(top_srcdir) && autoconf

#
# Make depend magic...
#

.depend: Makefile $(SRCS) $(top_srcdir)/depfix.sed $(top_srcdir)/wordwrap.pl
	if test -n "$(SRCS)" ; then \
		$(CC) -M $(ALL_CFLAGS) $(SRCS) | \
			$(SED) -f $(top_srcdir)/depfix.sed \
			    -e 's; $(srcdir)/; $$(srcdir)/;g' \
			    -e 's; $(top_srcdir)/; $$(top_srcdir)/;g' \
			    -e 's; $(top_builddir)/; $$(top_builddir)/;g' \
			    -e 's; \./; ;g' \
			    -e '/^#/d' \
			    -e '/^ *\\$$/d' | \
			$(PERL) $(top_srcdir)/wordwrap.pl > .depend; \
	else :; fi

depend:: .depend
	if test -n "$(SRCS)" ; then \
		sed -e '/^# +++ Dependency line eater +++/,$$d' \
			< $(srcdir)/Makefile.in | cat - .depend \
			> $(srcdir)/Makefile.in.new; \
	if cmp -s $(srcdir)/Makefile.in $(srcdir)/Makefile.in.new ; then \
		$(RM) $(srcdir)/Makefile.in.new ; \
	else \
		$(MV) $(srcdir)/Makefile.in $(srcdir)/Makefile.in.old; \
		$(MV) $(srcdir)/Makefile.in.new $(srcdir)/Makefile.in; \
	fi ; else :; fi

# End of file MCONFIG

RESIZE_DIR= resize
DEBUGFS_DIR= debugfs

LIB_SUBDIRS=lib/et lib/ss lib/e2p lib/ext2fs lib/uuid lib/blkid intl
PROG_SUBDIRS=e2fsck $(DEBUGFS_DIR) misc $(RESIZE_DIR) tests/progs po
SUBDIRS=util $(LIB_SUBDIRS) $(PROG_SUBDIRS) tests

SUBS= lib/ext2fs/ext2_types.h lib/blkid/blkid_types.h lib/uuid/uuid_types.h

TAR=tar

all:: subs
	$(MAKE) libs
	$(MAKE) progs
	$(MAKE) docs

subs:
	@for i in $(SUBS) ; do if test -d `dirname $$i` ; then $(MAKE) $$i ; fi ; done

progs: subs all-progs-recursive
libs: subs all-libs-recursive

e2fsprogs.spec: $(DEP_SUBSTITUTE) e2fsprogs.spec.in
	cd $(top_builddir); CONFIG_FILES=./e2fsprogs.spec ./config.status

rpm: e2fsprogs.spec
	sh contrib/build-rpm

docs:
	-@test -d doc && cd doc && $(MAKE) libext2fs.info

install-doc-libs:
	-@test -d doc && cd doc && $(MAKE)

uninstall-doc-libs:
	-@test -d doc && cd doc && $(MAKE) uninstall-doc-libs

clean-doc:
	-@test -d doc && cd doc && $(MAKE) clean

distclean-doc:
	-test -d doc && cd doc && $(MAKE) distclean

install: subs all-libs-recursive install-progs-recursive \
  install-shlibs-libs-recursive
	if test ! -d e2fsck && test ! -d debugfs && test ! -d misc && test ! -d ext2ed ; then $(MAKE) install-libs ; fi

install-strip: subs all-libs-recursive install-strip-progs-recursive \
  install-shlibs-strip-libs-recursive

uninstall: uninstall-progs-recursive uninstall-shlibs-libs-recursive uninstall-doc-libs

install-libs: install-libs-recursive

uninstall-libs: uninstall-libs-recursive

TAGS clean-recursive distclean-recursive depend-recursive check-recursive \
  mostlyclean-recursive realclean-recursive:
	@for subdir in $(SUBDIRS); do \
	  if test -d $$subdir ; then \
	    target=`echo $@|$(SED) 's/-recursive//'`; \
	    echo making $$target in $$subdir; \
	    (cd $$subdir && $(MAKE) $$target) || exit 1; \
	  fi ; \
	done

all-progs-recursive install-progs-recursive install-strip-progs-recursive \
  uninstall-progs-recursive:
	@for subdir in $(PROG_SUBDIRS); do \
	  if test -d $$subdir ; then \
	    target=`echo $@|$(SED) 's/-progs-recursive//'`; \
	    echo making $$target in $$subdir; \
	    (cd $$subdir && $(MAKE) $$target) || exit 1; \
	  fi ; \
	done

all-libs-recursive install-libs-recursive install-strip-libs-recursive \
  uninstall-libs-recursive install-shlibs-libs-recursive \
  install-shlibs-strip-libs-recursive uninstall-shlibs-libs-recursive:
	@for subdir in $(LIB_SUBDIRS); do \
	  if test -d $$subdir ; then \
	    target=`echo $@|$(SED) 's/-libs-recursive//'`; \
	    echo making $$target in $$subdir; \
	    (cd $$subdir && $(MAKE) $$target) || exit 1; \
	  fi ; \
	done

mostlyclean: mostlyclean-recursive mostlyclean-local

clean: clean-recursive clean-local clean-doc
	$(RM) -f $(SUBS) 

distclean: distclean-doc distclean-recursive distclean-local 
	$(RM) -rf autom4te.cache e2fsprogs.spec ext2ed/Makefile po/stamp-po

realclean: realclean-recursive realclean-local

depend:: depend-recursive

lib/ext2fs/ext2_types.h: $(DEP_SUBSTITUTE) asm_types.h \
		$(srcdir)/lib/ext2fs/ext2_types.h.in
	cd $(top_builddir); CONFIG_FILES=./lib/ext2fs/ext2_types.h ./config.status

lib/blkid/blkid_types.h: $(DEP_SUBSTITUTE) asm_types.h \
		$(srcdir)/lib/blkid/blkid_types.h.in
	cd $(top_builddir); CONFIG_FILES=./lib/blkid/blkid_types.h ./config.status

lib/uuid/uuid_types.h: $(DEP_SUBSTITUTE) asm_types.h \
		$(srcdir)/lib/uuid/uuid_types.h.in
	cd $(top_builddir); CONFIG_FILES=./lib/uuid/uuid_types.h ./config.status

mostlyclean-local:
	$(RM) -f \#* *~ *.orig core MAKELOG 

clean-local: mostlyclean-local

distclean-local: clean-local
	$(RM) -f $(SUBS) $(SUBST_CONF) \
		config.status config.log config.cache MCONFIG Makefile \
		$(srcdir)/TAGS $(srcdir)/Makefile.in.old

realclean-local: distclean-local
	$(RM) -f configure

check::	subs check-recursive